Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Kitchen Remodeling: The Las Vegas Owner’s Guide
We remodel Plant Prefab kitchens here in Las Vegas, and most jobs land between $14,000 and $45,000 depending on whether you’re refreshing fronts and counters or rebuilding the layout. If your Plant Prefab kitchen is failing – sagging cabinet fronts, tired counters, hardware that no longer lines up – the honest answer is that this is remodeling work, not a parts swap, and it deserves a real estimate rather than a guess over the phone.
Owners usually figure it out slowly. A drawer front that stops closing flush. A seam on the countertop that starts catching a fingernail. A handle that pulls loose from the panel. Then someone opens the cabinet under the sink and finds swelling at the bottom board. Plant Prefab builds to tight tolerances, which is good news for the structure and less good news for anything the desert heat and dry air have been working on for a decade.
Which Plant Prefab Models This Applies To
Plant Prefab builds both custom and repeat plan lines, and the kitchen cabinetry and millwork specs shift from one model and production run to the next. That matters to you because a cabinet door from one run often isn’t a bolt-on match for another: hinge cup boring, door thickness, and the drawer glide series can all differ. Before anyone orders a part, we measure the actual door, the actual opening, and the actual hinge pattern on your cabinets – not the spec sheet from the plan set.
Identifying the right part starts with the labels. Plant Prefab units typically carry a data plate or serial tag inside a cabinet or on the panel near the electrical, and that tag ties to the as-built drawing set. If the tag is missing or painted over, we go off measurements: door width, height, thickness, hinge bore distance, and the glide model stamped on the drawer box. That’s usually enough to match.
The OEM-versus-aftermarket call is where owners get stuck. Going OEM gets you an exact match, and it can mean a long lead time. A quality aftermarket equivalent – a name-brand hinge, glide, or front from a manufacturer we already trust, like KraftMaid for cabinet fronts – often costs less and installs cleaner, and you can look up the spec yourself. We’ll lay both options out in writing with the tradeoffs, so the choice is yours and not ours to make quietly. Barrett & Sons is an independent contractor and is not affiliated with Plant Prefab.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Kitchen Remodeling Is Failing
- Doors that drag or won’t sit flush. Usually worn hinge cups or a hinge that’s pulled its screws out of the panel in dry Las Vegas air. The door isn’t warped – the hardware has given up.
- Drawers that stick halfway or drop when loaded. The glide has lost its tension or the box has racked. Under-load sag on a heavy drawer is the earliest warning.
- Swelling or soft spots at the sink base. Slow leaks do this quietly. By the time the bottom board is soft, the cabinet box is the repair, not the finish.
- Countertop seams that catch a fingernail or show a shadow line. Heat cycling and settling move the substrate. A seam that’s opened is telling you the base has shifted.
- Loose handles, pulls, and cabinet fronts that rattle. Fasteners work loose over years of use. Sometimes it’s a five-minute fix – sometimes it’s the first sign the front is ready to be replaced.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here in Las Vegas, a full kitchen remodel runs $14,000 to $45,000, a small kitchen $9,000 to $20,000, cabinet installation $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000. Those are installed ranges, and they cover labor and materials – the part, the demo, the fitting, the finish work, and haul-away.
What drives the range is spec and access: whether we’re matching an OEM front or swapping to a name-brand equivalent, how much of the box has to be rebuilt, and whether the plumbing or electrical has to move. We quote it line by line, and any change to scope arrives as a written change order before work starts. Every eligible job gets permits pulled and inspections signed. The work is backed by our written 90-Day Done Right Promise – if something’s not right, one call brings Tom back.
DIY or Call Us?
You can safely tighten a loose handle, adjust a European hinge with a screwdriver, and measure your own doors for a replacement quote. That’s the honest line. Where it goes wrong is the work behind the face: a sink-base leak that looks dry, a cabinet box that’s separated from the wall, a countertop seam that needs re-setting, or anything touching the electrical feeding a disposal or outlet. Water and electricity don’t forgive guesswork, and a cabinet that comes off the wall takes the counter with it.
If you’re only chasing a wobbly pull, try a screwdriver first. If the cabinet box, the counter, or the plumbing is in play, that’s when you call (866) 814-4155 and let us quote it in writing. The estimate is free, and a second opinion on someone else’s estimate is free too.
FAQs
Plan on 15 to 25 years for quality cabinet fronts and glides under normal use here, and 10 to 15 years for the caulk and seals around the sink base. Las Vegas heat and low humidity are hard on anything wood and anything sealed – the cabinets themselves hold up, but hinges, glides, and seals are the first to go. If your kitchen is past 12 years, a free estimate will show you what’s actually worn. Call (866) 814-4155 to schedule one.
Sometimes, yes. Worn hinges, loose handles, a single failing drawer glide, and a resealable counter seam are all repair-level work, and we’ll say so if that’s the case. When the cabinet box is swollen, the substrate has moved, or the layout no longer works, repair becomes remuda of diminishing returns and a partial remodel makes more sense. We’ll tell you which one you’re looking at in the written estimate, not on the phone.
A fronts-and-counters refresh runs about a week to ten days; a full kitchen remodel typically runs three to six weeks depending on permits and how much the layout changes. We don’t promise same-day work on remodeling – nobody should – but we do tell you the schedule up front and flag any change the day it comes up. Call (866) 814-4155 to get a realistic timeline for your kitchen.
We identify your unit from the data plate or the as-built measurements, then order either the OEM front or a name-brand equivalent – whatever you choose after we show you both in writing. We don’t carry stock of Plant Prefab parts and we don’t claim to; sourcing is per job, which is why matching on the front end matters. We also service KraftMaid, Cambria, and Silestone finishes. Call (866) 814-4155 and we’ll get the measurements started.
If you’re ready to price it, call Barrett & Sons Construction Las Vegas at (866) 814-4155 for a free estimate. Tom Barrett publishes his name, his address, and his license number – look it up before you sign anything. A live person answers the phone 24 hours a day, seven days a week. Our technicians have up to 28 years of experience, and standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.