A Barrett company - serving Las Vegas, NV
E

ES Windows Construction Service in Las Vegas, NV

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Las Vegas Homeowners Choose ES Windows Construction

We provide independent ES Windows construction, repair, and replacement service across Las Vegas, NV – we’re not the manufacturer, and we’re not an authorized dealer. What makes our ES Windows work different is that we handle these vinyl and aluminum lines every week in Southern Nevada’s heat and UV load, so we know how a 6000 Series sash behaves after fifteen summers on a west-facing wall. Call (866) 814-4155 to schedule a free estimate.

Call (866) 814-4155

ES Windows (the brand’s commonly used shorthand for Energy Shield windows) shows up all over Las Vegas housing stock. We work on the 6000 Series single-hung vinyl windows throughout the 1990s and 2000s stucco-and-tile subdivisions in Summerlin and Centennial Hills, the horizontal sliding vinyl units that open to patios and pool decks, the Series 2000 and 3000 vinyl replacement windows installed during retrofit waves in older central neighborhoods like Paradise Palms and the Huntridge area, and the aluminum-framed slider and picture window units still common on mid-century homes.

We are not affiliated with, authorized by, sponsored by, or endorsed by ES Windows. We’re an independent provider. Our credibility comes from repeated hands-on work with these units across the valley, not from a manufacturer badge. Any warranty you hold with ES Windows remains yours to pursue directly with them.

Key Takeaways

  • Independent ES Windows repair, replacement, and installation across the Las Vegas valley – no manufacturer affiliation.
  • We track how ES Windows vinyl and aluminum lines actually fail in Mojave Desert sun, heat cycling, and dust.
  • OEM parts whenever the model is still supported; quality aftermarket only for discontinued profiles.
  • Window work here often overlaps with roof repair on stucco-and-tile homes – we handle both.
  • Live person answers the phone 24/7. Free second opinion on any written estimate.

Why Trust Barrett & Sons Construction Las Vegas for Your ES Windows Construction?

Our crew members have up to 28 years of experience, and ES Windows units are a weekly part of that work. A 6000 Series single-hung doesn’t behave like a Series 2000 retrofit, and neither behaves like an aluminum picture window from the 1970s. The hardware is different, the balance systems are different, and the way each one fails under Las Vegas sun is different. We know which sash profiles warp first, which roller assemblies bind, and which weatherstripping goes brittle fastest on a south-facing elevation.

Parts sourcing is where a lot of ES Windows jobs go sideways. OEM-compatible sashes, rollers, locks, balances, and IGU glass are the right call whenever the model is still supported. When a profile is discontinued, we source a quality aftermarket match and tell you plainly that’s what we’re installing – not pretend it’s factory. We don’t claim to stock ES Windows parts locally; parts are sourced per job based on the exact model and serial you have.

Warranty-safe practice matters too. We don’t drill, cut, or modify frames in ways that put your ES Windows coverage at risk without telling you first, and we put every scope, allowance, and price change in writing as a change order before work starts. Every eligible job gets permits pulled and inspections signed. If something isn’t right within 90 days, our written Done Right Promise brings us back on one call. Look up the license number yourself before you sign anything – that’s the standard we hold ourselves to.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common ES Windows Construction Problems We Fix in Las Vegas

  • Warped or bowed vinyl frames and sashes on 6000 Series single-hungs. Years of intense Las Vegas sun exposure softens vinyl and throws the sash out of square. The symptom is usually a window that won’t latch cleanly, gaps at the meeting rail, and air that moves when it shouldn’t. South- and west-facing elevations show it first.
  • Hardened weatherstripping and sweep seals on horizontal sliding units. The sweep at the bottom of a slider goes brittle and stops wiping the track. Desert dust rolls in on the next windy day, and your cooling bill climbs because the seal no longer closes the gap. This is one of the most common and most fixable ES Windows issues we see.
  • Fogged or failed insulated glass units (IGUs). When the perimeter seal on a sealed glass unit breaks down, moisture gets between the panes and the window hazes over. You can’t clean it off – it’s inside the glass. Series 2000 and 3000 retrofit windows with 15-plus years of thermal cycling are the usual candidates.
  • Sticking or binding rollers, locks, and tilt-latch hardware. Sliding and single-hung units both depend on small hardware that wears. A roller that’s flat-spotted or a lock that no longer aligns with its keeper turns a functional window into one you leave shut. The hardware is replaceable without touching the frame in most cases.
  • Cracked or yellowed vinyl on sun-facing elevations. UV degradation on older ES Windows profiles shows as a chalky, yellowed surface and hairline cracks near corners and screw holes. Once vinyl cracks at a stress point, the frame’s ability to hold square degrades with it.

One pattern worth knowing: a bedroom slider that suddenly won’t latch and lets fine desert dust in often isn’t a hardware failure at all. It’s a heat-cycling problem. The sash has bowed, the weatherstripping has hardened, and the roller has taken up the slack. A qualified local pro checks frame square and glass-seal condition before touching the hardware – if the frame is still true, a roller, sweep, and weatherstrip replacement solves it; if the vinyl is warped or the IGU has fogged, a full unit swap is the honest answer.

ES Windows Parts & Our Repair-vs-Replace Approach

We use OEM ES Windows replacement parts – sashes, rollers, locks, balances, and glass – whenever the model is still supported by the manufacturer. For discontinued profiles or hardware, we source a quality aftermarket match and tell you exactly what you’re getting. Parts are ordered per job based on your specific model and serial, so expect a lead time rather than a same-day fix. That’s the honest version.

Repair versus replace comes down to two questions. Are the frames sound? If yes, targeted repair is usually the right call and the better value. If the vinyl is warped, cracked at stress points, or multiple IGUs have failed across the same elevation, replacement is the better long-term spend – you’d be paying to chase the same failure mode from window to window. We’ll tell you which one applies to your home and put the recommendation in writing with a line-item quote.

If you’re weighing options on an aging set of ES Windows units, call (866) 814-4155 for a free estimate. Estimates are free, and our free second opinion on any written estimate you already have costs you nothing.

Our ES Windows Service Process – Step by Step

  1. 1
    Diagnosis. We check frame square, glass-seal condition on every IGU, roller and hardware operation, and weatherstripping condition on each unit. On Las Vegas stucco-and-tile homes we also look at the flashing and roof penetrations around the opening, because window and roof work overlap here more than most people expect.
  2. 2
    Written scope and quote. You get a line-item quote with the parts we’re using (OEM or aftermarket, stated plainly), the labor, and the permit requirement if one applies. Any change after that arrives as a written change order before work proceeds – no surprise invoices.
  3. 3
    Repair or install. For repairs, we replace the failed component (roller, sweep, weatherstrip, sash, balance, or IGU) without disturbing the frame if the frame is sound. For replacement, we set the new unit, seal it correctly for desert conditions, and address any roof flashing that needs attention first.
  4. 4
    Test and walk-through. Every lock, latch, tilt mechanism, and slider gets operated in front of you. We check for air infiltration at the meeting rail and perimeter, and confirm the glass is clean and clear.
  5. 5
    Warranty. Every completed job is backed by our written 90-Day Done Right Promise – if something isn’t right, one call brings us back. Your ES Windows manufacturer warranty is separate and stays with you.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

ES Windows Products We Service & Install in Las Vegas

We service and install the ES Windows lines that show up most across the Las Vegas valley:

  • ES Windows 6000 Series single-hung vinyl windows
  • ES Windows horizontal sliding vinyl windows
  • ES Windows Series 2000 and 3000 vinyl replacement windows
  • ES Windows aluminum-framed slider and picture window units

On the installation side, we handle full window replacement, impact window installation for homes that need it, and roof repair where window openings and roof penetrations overlap on stucco-and-tile construction. If you’re not sure which series you have, the model and serial are usually etched on the glass corner or printed on the frame; bring a photo to the estimate and we’ll identify it. We don’t claim to stock ES Windows product locally – everything is specified to your home.

We Also Service These Brands

ES Windows is one of several brands we handle. We also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures – so if a window replacement turns into a broader project, you’re not coordinating three separate contractors. One crew, one written scope, one point of accountability when something needs a second look.

FAQs – ES Windows Construction Service in Las Vegas

Is Barrett & Sons Construction Las Vegas authorized by ES Windows?

No. We are an independent ES Windows service provider – not authorized, sponsored, or endorsed by ES Windows. We work on these units as a qualified local contractor, and any manufacturer warranty you hold with ES Windows remains yours to pursue directly with them.

Do you use genuine ES Windows/OEM parts?

Yes, whenever the model is still supported. We use OEM ES Windows sashes, rollers, locks, balances, and glass for current-model units, and a quality aftermarket match only for discontinued profiles or hardware – and we tell you which one you’re getting in writing before work starts.

How long does ES Windows service take?

A targeted repair like a roller, sweep, or weatherstrip replacement is typically a short single visit once parts are in hand. OEM parts for your specific model are ordered per job, so plan on a lead time before the visit rather than a same-day fix. Full window replacement timing depends on unit count and whether roof flashing work is involved – the written quote states the timeline.

What ES Windows models/series do you cover?

We service the 6000 Series single-hung vinyl windows, horizontal sliding vinyl windows, Series 2000 and 3000 vinyl replacement windows, and aluminum-framed slider and picture window units. If you’re not sure which you have, the model and serial are usually marked on the glass corner or frame – bring a photo and we’ll identify it at the estimate.

Will service void my ES Windows warranty?

Not if it’s done correctly. We avoid drilling, cutting, or modifying frames in ways that put your ES Windows coverage at risk without telling you first. Keep your original purchase documentation, and ask us before any work that changes the unit’s structure. Your manufacturer warranty is separate from our written 90-Day Done Right Promise.

How much does ES Windows construction cost in Las Vegas?

Window replacement runs $4,500 – $15,000, impact window installation $8,000 – $25,000, roof repair $400 – $1,800, and roof replacement $8,000 – $20,000 in the Las Vegas market. Your actual number depends on unit count, model support, and whether roof flashing work is needed. Call (866) 814-4155 for an exact quote – estimates are free, and our free second opinion on any written estimate costs you nothing.

Service Typical Las Vegas Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Roof Repair $400 – $1,800
Roof Replacement $8,000 – $20,000

Every scope, allowance, and price change arrives as a written change order before work happens. The standing offers apply: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.

Book Your ES Windows Service in Las Vegas, NV

If your ES Windows sliders, single-hungs, or retrofit units are binding, fogging, or leaking dust, the fix may be smaller than you think – or it may be time to replace. We’ll tell you which, in writing, with a line-item quote. Call (866) 814-4155 to schedule your free estimate in Las Vegas today.

Written by the team at Barrett & Sons Construction Las Vegas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch