Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose Unilock Construction
We provide independent Unilock installation, repair, and driveway replacement across the Las Vegas valley, working from Unilock’s published installation guidance on base prep, edge restraint, and joint sand detailing. What sets our Unilock work apart is that we’re an independent installer, not a dealer-program crew: we quote what your site actually needs after looking at the sub-base, the grading, and the drainage, not what a manufacturer program is pushing that quarter. Las Vegas sits on Mojave Desert ground, and paver performance here lives or dies on how the base was built before a single Brussels Block or Umbriano slab went down.
We install and service Unilock hardscape systems throughout Las Vegas, from Summerlin and Centennial Hills out to the newer block-and-stucco subdivisions on the fringes. Barrett & Sons Construction is not affiliated with, authorized by, or endorsed by Unilock, and we don’t claim any manufacturer partnership or warranty authority. What we do claim is a straight answer, a written scope, and a crew that will still be around when the job is done. Call (866) 814-4155 to schedule a free estimate.
Why Trust Barrett & Sons Construction Las Vegas for Your Unilock Construction?
Unilock makes a genuinely good paver. The failures we see in Las Vegas homes are almost never the paver’s fault – they’re base, edge, and sand faults. Our technicians have up to 28 years of experience, and a lot of that time has gone into reading desert sub-base conditions that don’t behave like the manufacturer’s generic spec sheet assumes. Caliche and expansive clay don’t drain like midwest soil, and a paver that rocks at the apron within two summers tells you the base wasn’t compacted to depth.
We match OEM Unilock pavers, edge restraints, and joint sand to existing runs so a repair blends with the faded field color instead of reading as a bright patch. Where a color’s been discontinued, we’ll tell you honestly and match a quality aftermarket paver on size and finish rather than pretend we can source the original. Every job carries our 90-Day Done Right Promise, written on the contract: if it’s not right, you call, and we come back and make it right. Permits get pulled where they’re required, and every scope change arrives as a written change order before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Las Vegas
Most of what we’re called out to fix on Unilock systems in Las Vegas comes down to one of five things. Here’s what each one actually looks like and why it happens.
- Efflorescence on Brussels Block and Beacon Hill Flagstone. That white salt haze on the face keeps coming back after you clean it because moisture is migrating up through the paver from a base that isn’t draining. The fix isn’t another acid wash – it’s correcting the grading and base drainage underneath.
- Joint sand washout and paver migration on Umbriano and Lineo driveways. Polymeric sand installed over a wet or under-compacted base never locks. The pavers move, the joints open, and monsoon-season runoff carries the sand out. On Umbriano slab pavers the tight joints make this worse, not better, because there’s less room for the sand to settle into.
- Edge restraint failure and spalling at driveway aprons. Las Vegas thermal cycling – 105°F days dropping into the 60s overnight – expands and contracts the field. When Unilock pavers were bedded too thin over expansive desert soils, the apron lifts, the edge restraint pops, and the paver corners spall under vehicle load.
- Color fade and surface pitting on lighter pavers. Intense UV and windblown abrasive sand scuff the surface of light-colored Thornbury and Beacon Hill runs. Unsealed pavers show it within a few summers. A proper penetrating sealer slows it, though it won’t undo existing pitting.
- Returning efflorescence on Thornbury patios set against stucco walls. We see this on Las Vegas patios where irrigation spray hits the wall and runs onto the pavers. The salts keep blooming because the moisture source was never addressed, not because the paver is defective.
Unilock Parts & Our Repair-vs-Replace Approach
We source OEM Unilock pavers, edge restraints, and polymeric joint sand for each job rather than stocking them – which means we order the specific color and profile your run needs, and we tell you up front if a lead time is involved. Where Unilock has discontinued a color, a quality aftermarket paver matched on size, thickness, and finish is the honest fix, and we’ll say so before you commit.
On repair versus replace: if the base failure is localized to a field or an apron, spot repair makes sense and we’ll scope it that way. If the sub-base has failed across the driveway, spot repair is throwing money away – you’ll be back in two summers with the same rocking pavers. Full re-lay with a corrected sub-base is the replace stance, and we’ll show you why in writing before you decide. Call (866) 814-4155 for a free estimate on either path.
Our Unilock Service Process – Step by Step
A Unilock Brussels Block driveway several summers old typically shows joint sand washing out, pavers rocking at the apron, and efflorescence that returns after rain. The usual cause is a compacted-base failure or missing edge restraint rather than bad pavers, so a qualified installer pulls the affected field, re-grades and re-compacts the sub-base, resets pavers on proper bedding, reinstalls edge restraint, and re-sands with polymeric joint sand. That’s the shape of how we work:
- 1
Diagnosis. We pull a few pavers, check base depth and compaction, and inspect the edge restraint and grading. We tell you whether the failure is surface, base, or drainage.
- 2
Written scope. Repair or re-lay, materials, allowances, and price all go in writing with a change-order process before work starts. No surprise invoices.
- 3
Repair or install. Excavation through caliche where needed, corrected sub-base, proper bedding, OEM or matched pavers, new edge restraint, polymeric joint sand.
- 4
Test and warranty. We water-test drainage, walk the field, and back the work with our 90-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Las Vegas
We work across the Unilock paver lines you’re most likely to have on a Las Vegas property:
- Brussels Block – the classic tumbled driveway and walkway paver; the line we see most often with joint-sand and efflorescence issues.
- Beacon Hill Flagstone – irregular flagstone-style pavers used on patios and pool decks; prone to salt bloom when drainage is off.
- Thornbury – a premium textured paver for driveways and patios; watch for UV fade on lighter colors.
- Lineo and Umbriano – large-format slab pavers; their tight joints demand a properly compacted base or the field migrates.
We also handle base prep, edge restraint systems, polymeric joint sand, and penetrating sealers for these lines. We don’t claim to stock any of it locally – we source per job.
We Also Service These Brands
Barrett & Sons Construction Las Vegas isn’t a single-brand shop. Alongside Unilock hardscapes, we handle KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures in our kitchen and bath work, plus GAF and CertainTeed roofing, Andersen and Marvin windows, and Belgard and Techo-Bloc hardscapes. That breadth means you get one crew you can verify, not a different specialist for every trade who vanishes after the invoice.
FAQs – Unilock Construction Service in Las Vegas
No. We’re an independent Unilock installer and service provider with no manufacturer authorization, partnership, or warranty endorsement. We follow Unilock’s published installation guidance on our own responsibility, and we tell you plainly that we’re not a dealer-program crew. That independence is why our quote reflects your actual site conditions. Call (866) 814-4155 to schedule a free estimate.
Yes – we source OEM Unilock pavers, edge restraints, and polymeric joint sand matched to your existing run whenever the color and profile are available. If a color has been discontinued, we’ll say so and match a quality aftermarket paver on size and finish so the repair blends rather than reads as a patch. We don’t claim to stock parts locally; every job is sourced to spec.
A localized joint-sand and edge-restraint repair is usually a one- to two-day job. A full driveway re-lay with corrected sub-base and caliche excavation typically runs several days depending on square footage and access. Las Vegas summer heat pushes concrete and exterior work to dawn shifts, which can stretch scheduling in July and August. Call (866) 814-4155 for a written timeline with your free estimate.
We cover Brussels Block, Beacon Hill Flagstone, Thornbury, and the Lineo and Umbriano slab paver lines, along with the base prep, edge restraint, joint sand, and sealing those systems depend on. If your paver isn’t on that list, call us – we’ll tell you honestly whether it’s a job we can do well or should hand off.
We can’t speak to your Unilock warranty terms – that’s between you and the manufacturer, and we’re not authorized to interpret or honor it. What we can tell you is that we follow Unilock’s published installation guidance on base depth, edge restraint, and joint sand, which keeps your work consistent with spec. We back our own labor with the written 90-Day Done Right Promise.
Paver work in Las Vegas depends on square footage, base condition, and whether caliche excavation is needed. Here are our typical ranges:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (866) 814-4155 for an exact quote – estimates are free, and every price change comes in writing before work starts.
That white haze is efflorescence, and it keeps coming back because moisture is migrating up through the paver from a base that isn’t draining properly. Cleaning the surface won’t fix it – the grading and base drainage underneath need correcting. We diagnose the moisture source before quoting the fix. Call (866) 814-4155 for a free estimate.
Sometimes, but only when the existing surface is structurally sound, properly graded for drainage, and stable enough to act as a base. In Las Vegas, cracked slab or failed pavers underneath usually have to come out – you can’t compact a base you never built. We’ll tell you honestly which path your site allows.
Polymeric sand is the standard joint-stabilizer for Unilock paver systems, but in Las Vegas heat it only performs if the base was compacted and dry when it was installed. Sand set over a wet or under-compacted base never locks, and our dry climate’s temperature swings open the joints further. Installation conditions matter more than the sand brand.
Unilock’s published guidance for driveway applications calls for a compacted aggregate base built to depth for vehicle loads, with proper edge restraint on all sides. Las Vegas caliche and expansive clay can require excavation equipment to reach that depth, and Clark County’s dust-control rules mean grading work has to be managed carefully. We measure and document base depth as part of diagnosis.
Book Your Unilock Service in Las Vegas, NV
If your Unilock pavers are rocking, blooming white, or losing joint sand, we’ll diagnose the actual cause and give you a written scope with a real price range. Barrett & Sons Construction Las Vegas pulls permits where they’re required, backs the work with our 90-Day Done Right Promise, and answers the phone with a live person any hour. Call (866) 814-4155 for your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas.