A Barrett company - serving Las Vegas, NV

Cambria Home Additions & ADU in Las Vegas, NV

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Home Additions & ADU: The Las Vegas Owner’s Guide

If you’re building a home addition or ADU in Las Vegas and want Cambria quartz on the countertops, the surfaces themselves install fine – what actually fails are the pieces around them: seams that open under desert heat cycling, sinks that pull loose from undermount clips, and cabinets that can’t carry the slab weight. A finished addition with Cambria runs $45,000 – $130,000 in Las Vegas; a standalone ADU runs $90,000 – $220,000. We’re an independent contractor and not affiliated with Cambria, but we’ve installed enough of it here to know exactly where it goes wrong.

Call (866) 814-4155

Most owners in Las Vegas discover the problem a few weeks after move-in, not on installation day. A hairline crack opens along a seam, a sink starts to sag, or a countertop edge feels loose when you lean on it. By then the drywall is closed and the paperwork is filed – so it pays to know what to look for before the dust settles.

Which Cambria Models This Applies To

Cambria quartz comes in several collections, and the surface isn’t the failure point – the installation environment is. Different collections behave differently around heat, and that matters more in Las Vegas than almost anywhere else in the country.

How to identify what you have: Cambria slabs carry a label on the back with the collection name and color, and the fabricator’s paperwork will list the slab and lot. If the label is gone, measure the thickness – Cambria runs 2cm or 3cm, and 3cm is the standard for a countertop that has to hold up in a hot kitchen.

The OEM-versus-aftermarket decision: Cambria is proprietary. There’s no “aftermarket equivalent” of the slab itself – it’s Cambria or it isn’t. What does get sourced aftermarket is the undermount sink hardware, the seam adhesive, and the edge-profile trim, and this is where cheap substitutions show up first. A $15 set of generic undermount clips on a 3cm slab will not hold in a Las Vegas kitchen; the correct epoxy and the manufacturer’s own sink-mounting hardware will. We ask for the fabricator’s spec sheet on every job, and if it’s missing we measure and match the thickness and edge profile before ordering anything.

The same principle applies to the surrounding cabinetry – if the addition includes a kitchen, we’re matching KraftMaid cabinets to the Cambria countertop depth so the overhang and seam layout work. Silestone and Kohler are the other names we install most often alongside Cambria.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Home Additions & ADU Is Failing

Symptom What’s usually causing it
1. A crack along a seam The seam adhesive failed from thermal cycling. Cambria expands and contracts, and in a Las Vegas summer with an exterior-facing kitchen wall, that cycle is brutal. If the seam is a straight line, it’s an adhesive failure, not a slab failure.
2. A loose or sagging sink The undermount clips have pulled free or weren’t specified for a 3cm slab. This is the most common post-install complaint we get in Las Vegas, and it’s usually the fabricator’s hardware, not the sink.
3. A countertop that rocks when you lean on it The cabinet run is out of level or the substrate was never shimmed properly. Cambria is heavy – around 20 lbs per square foot at 3cm – and an unlevel base will telegraph through within a season.
4. A cloudy or hazy patch that won’t clean up Usually a fabricator polishing error, not a surface defect. The finish is a factory polish, and an aggressive edge sanding job shows up as a dull patch under light.
5. An edge that chips at the corner The edge profile was cut too close to the slab edge. Quartz is hard but brittle at an unsupported edge, and a 1-inch overhang with no support will chip at the corner more often than not.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a home addition or ADU in Las Vegas, plan on $45,000 – $130,000 for the addition itself and $90,000 – $220,000 for a standalone ADU. A garage conversion lands at $30,000 – $80,000. Those are whole-project ranges, not a single part swap, because what fails on a Cambria install is almost never the slab – it’s the hardware and the substrate around it.

What drives the range: the footprint, whether an exterior kitchen wall is involved (heat cycling), whether you’re moving plumbing for a sink, and whether the cabinets underneath have to be re-leveled or replaced. The Cambria countertop component alone runs $2,000 – $6,500 for installation, and a backsplash adds $800 – $2,500.

Every scope, every allowance and every price change comes to you as a written change order before work moves – an allowance that isn’t on paper is a surprise waiting for a date. Permits get pulled and inspections signed on every eligible job, and the work carries a written 90-Day Done Right Promise.

DIY or Call Us?

Here’s the honest split. You can safely check: whether the sink is loose, whether a seam looks open, whether the countertop rocks under hand pressure, and whether the fabricator left a label on the back of the slab. Those are observation, not repair, and they tell you what you’re dealing with.

Where DIY goes wrong: Cambria is a 2cm or 3cm engineered stone slab at roughly 20 lbs per square foot. Pulling one to re-seat a sink or re-glue a seam is a two-person job with slab-lifting equipment, and an unsupported edge will crack the moment it’s handled wrong. Re-gluing a seam with hardware-store epoxy is the single most common mistake we get called to fix – it doesn’t match the thermal expansion rate of the slab, and it fails again. There’s no DIY path to a proper seam repair. Call us at (866) 814-4155 and we’ll tell you straight what the fix actually is before you touch it.

FAQs

How long does Cambria quartz last on a home addition or ADU countertop? Decades. Cambria itself is warrantied by the manufacturer, and the surface doesn’t fail in Las Vegas heat. What fails first is the seam adhesive and the undermount hardware – those are the parts that need attention at the 5-to-10 year mark, not the slab. Call (866) 814-4155 for a free estimate on the hardware side.

Can a failing seam or loose sink be repaired instead of replaced? Yes, in almost every case. A seam can be re-glued with the correct epoxy and a loose undermount sink can be re-seated with proper hardware, and both are far cheaper than a new slab. Full replacement only makes sense if the slab itself is cracked through. Call (866) 814-4155 and we’ll tell you which one you’re looking at.

How long does the swap take? A sink re-seat or a seam repair is typically a one-day job. A full countertop replacement in an addition runs 2 – 4 days including template, fabrication and install. We’ll give you the timeline in writing before we start.

How do you source the part? Cambria is proprietary, so the slab and its trim come from Cambria’s fabricator network – there’s no aftermarket version. We match the collection, thickness and edge profile to what’s already installed, and if the label is gone we measure it. We don’t claim to stock parts or carry them on a truck; everything gets ordered to your job.

We’ve been at this since 1998, Tom Barrett and his sons are on-site most days, and if something’s not right the 90-Day Done Right Promise means one call brings us back. We’re proud to serve Las Vegas and nearby areas, our technicians have up to 28 years of experience, and we also install KraftMaid, Silestone and Kohler alongside Cambria. A live person answers the phone 24/7, and current standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (866) 814-4155 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch