Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Las Vegas Owner’s Guide
We handle Moen bathroom remodeling in Las Vegas, and most of the calls we get start with a fixture that quit working: a cartridge that won’t stop dripping, a shower valve that runs hot then cold, a Moen Posi-Temp handle that spins without changing anything. A full bathroom remodel here runs $9,000 to $28,000, and a fixture-specific repair or partial swap is a much smaller job. We don’t promise same-day for a remodel, but we can usually get eyes on a failed Moen part within a day or two and tell you straight whether it’s a $40 cartridge or a valve that needs rough-in work.
Which Moen Models This Applies To
Moen parts are not universal, and that’s where most homeowners get stuck. The 1200 and 1222 cartridge series fit older single-handle faucets and shower valves going back decades, while the 1225B and the newer Duralock-era cartridges fit different valve bodies with a different puller tool. Posi-Temp shower valves take a 1222-style cartridge; Moentrol valves use a 1200. Before we order anything, we pull the trim plate and read the tag on the valve body, or match the handle shape and escutcheon screw pattern against Moen’s model lookup. If the tag is gone, we measure the cartridge stem length and diameter because a 1200 and a 1222 look nearly identical in the hand but won’t seat in the wrong body.
On the OEM-versus-aftermarket question, here’s our read: Moen-branded cartridges and trim are worth the small premium for shower valves buried behind tile, where a failed part means tearing into a wall. For a vanity faucet aerator or a pop-up drain assembly, a quality aftermarket equivalent works fine and saves you money. We install Moen across bathrooms, and we also work with KraftMaid vanities, Cambria and Silestone tops when a remodel is on the table.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Bathroom Remodeling Is Failing
- The faucet drips from the spout when the handle is fully off. That’s a worn cartridge seat in almost every case, not a loose handle. The rubber cup inside the cartridge flattens with age and Las Vegas’s hard water speeds it up.
- The handle is stiff or grinds when you turn it. Mineral scale has built up on the cartridge stem. Our water runs high in calcium, so a cartridge that would last 15 years in a soft-water city often starts sticking closer to 8 or 10 here.
- Shower water temperature flips between hot and cold. The pressure-balancing spool inside a Posi-Temp valve has failed or is clogged with scale. This one is worth taking seriously; it can scald.
- Water puddles at the base of the faucet or seeps behind the escutcheon. An O-ring or the cartridge’s outer seal has gone. Left alone, that slow leak rots the cabinet under a vanity.
- The spout or handle wobbles. Usually a loose mounting nut or a worn trim ring. Sometimes it’s the valve body working loose behind the wall, which needs a look before it turns into a bigger repair.
Replacement Cost & What’s Included
Here’s the honest layout for Las Vegas, and the price changes based on how deep the fixture sits behind tile and whether the rough-in needs work.
- Cartridge replacement: $180 to $340, includes the Moen cartridge and labor.
- Bathroom vanity installation: $800 to $3,000, includes setting the vanity, connecting the Moen faucet, and the supply lines.
- Shower replacement: $3,000 to $8,500 for a full fixture and surround swap.
- Walk-in shower installation: $4,500 to $12,000 with new valve, trim, and tile.
- Full bathroom remodel: $9,000 to $28,000, with Moen fixtures tied into the scope.
Every scope and allowance is written down before we start, and any price change comes to you as a written change order before we touch the job. Every eligible job gets a permit pulled and inspected, and the work is backed by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: turn off the supply stops, remove the handle and trim plate, and look for a model tag or scale buildup. That’s diagnosis, not repair. Where DIY goes wrong on Moen is the shower valve. Pulling a cartridge out of a valve body requires the right puller, and forcing it with pliers or a screwdriver can crack the valve body behind the tile, turning a $250 repair into a wall-open job. On older valves the retaining clip and the pressure-balancing spool can also be damaged, and a shower valve that fails open can scald. We send experienced crew members, not a stranger with a van, and a live person answers our phone around the clock. If the part is behind tile, call (866) 814-4155 and let us look before you dig in.
FAQs
Expect roughly 8 to 12 years here, shorter than the 15-plus years quoted for soft-water areas because our hard water and scale wear the cartridge faster. Using a whole-home or under-sink softener can stretch that. Call (866) 814-4155 if yours is already past its prime.
Often yes. Most Moen drips and stiff handles are a cartridge and O-ring swap, not a new fixture. If the valve body itself is cracked or scaled solid, replacement is the honest answer. We’ll tell you which one you’re looking at before any work starts.
A straightforward shower or faucet cartridge swap usually takes about an hour, and a vanity or shower fixture replacement runs half a day. If tile has to come open to reach the valve, plan on more. Call (866) 814-4155 for a clear time estimate on your specific job.
We match your exact valve or faucet model against Moen’s parts listing and order the correct OEM or quality equivalent, verified against the model tag or measured specs. We don’t guess at the part number. Call (866) 814-4155 and we’ll get the right one ordered.
Get Moen Fixtures Handled Right in Las Vegas
If a Moen faucet or shower valve in your Las Vegas home has started to drip, stick, or run hot and cold, don’t wait for it to fail behind a wall. Barrett & Sons Construction is an independent local contractor, not affiliated with Moen, and we’ve been keeping bathrooms working across the Las Vegas area for over 29 years, founded in 1998 and owner-operated since day one. Scope, allowances, and any price change come to you in writing, permits get pulled and inspected on every eligible job, and each completed job is covered by our 90-Day Done Right Promise. Ask about our standing offers, including $40 off any repair over $200 and a free second opinion on any written estimate, plus a permanent 10% senior and veteran discount. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.