Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Las Vegas Owner’s Guide
Toto doesn’t make home additions or ADUs. What Toto makes is the plumbing that goes into them, and that’s where we come in: if your Toto fixture, valve, or water line needs to fit inside a new addition or detached unit, we build the addition around it. Home additions in Las Vegas run $45,000 to $130,000, and ADU construction runs $90,000 to $220,000. These are planned jobs measured in months, not same-day repairs, so call us at (866) 814-4155 to schedule your free estimate before you buy a single fixture.
Owners usually find the problem after the fact. A Toto valve or supply line gets roughed in behind drywall before anyone checks the rough-in dimensions against the finished tile. Or a builder sets the toilet flange height without accounting for the floor build-up in a tiled bath. Months later you’re staring at a slow leak, a wobbly fixture, or a stubborn shutoff valve that a builder quietly covered with a medicine cabinet.
Which Toto Models This Applies To
Toto’s residential line splits into three families that matter for an addition: the Drake, Eco Drake, and Ultramax toilets, which use standard 12-inch rough-ins most national builders set; the Washlet and S7 bidet seats, which need a dedicated GFCI outlet within cord reach of the toilet base; and the high-efficiency Aquia and Carlyle models, which are more sensitive to supply pressure and often have a slightly different tank-to-bowl seating than owners expect from a parts drawing. Identify your model from the label inside the tank lid, not from the sales receipt. Toto changes hinge and gasket dimensions between revisions of the same model number, so the model on paper and the model in your box can be a different year.
On OEM versus aftermarket: for fill and flush valves, a genuine Toto valve matches the exact tolerance of the American Standard and Fluidmaster equivalents that get swapped in during cheap builds, and the difference shows up in the noise level at 2 a.m. For tanks and bowls, OEM is the only sensible answer in a new addition because the rough-in geometry is baked into the wall framing. Neither we nor anyone in Las Vegas can make a Toto bowl bolt to a wall that was framed for a different rough-in. That’s a planning decision, not a parts decision. We’re an independent service provider. We’re not affiliated with Toto, and we don’t claim to be.
The other brands we carry and install across the same projects are KraftMaid, Cambria, and Silestone, so the plumbing rough-in and the finish schedule can be coordinated by the same crew that pulls the permits.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
- Slow toilet refill or a whistling fill valve – usually a fill valve cartridge that’s mineral-scaled shut from Las Vegas water, which runs hard enough to chew through valve internals in two to four years on a faucet that isn’t filtered.
- You can hear the tank refilling by itself at night – a flapper that’s lost its seal. In a new addition, this is often the first symptom owners notice because the bathroom shares a wall with the bedroom.
- A wet ring around the base after every flush – the wax seal failed, almost always because the floor build-up was measured wrong at framing. The flange should sit at the floor surface, and in a Las Vegas slab add-on, that’s a rough-in the wrong way more often than the wrong wax ring.
- A shutoff valve that won’t close or feels loose – the valve stem or seat has failed. This one is worth fixing even if the toilet is fine, because you don’t want the only shutoff to your new addition failing on the same day a supply line does.
- A wobbling Washlet seat or a bidet that intermittently stops heating – hinge bolts that weren’t tightened to spec, or a supply issue. Toto bidet seats want steady line pressure; if the addition shares a line with a laundry or hose bib, you’ll see the fluttering.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
The pricing on a Toto-related fixture fix inside an addition is small relative to the addition itself. A toilet pulled and reset with a new wax seal and bolts runs $180 to $420 depending on the flange condition. A fill or flush valve replacement runs $95 to $220 parts and labor. A supply shutoff valve replacement runs $140 to $320. A bidet seat hinge or gasket service runs $110 to $260. The $45,000 to $130,000 number for the addition itself is driven by square footage, foundation, and plumbing runs, not by the fixture.
Every price we quote is a fixed line-item price. There are no change orders after the fact unless you ask for one in writing first, and the $40 Off Any Repair Over $200 applies to the fixture line. No trip charge inside the county, and the 10% Senior & Veteran discount is permanent and stacks on the rest. Our technicians have up to 28 years of experience, and every repair carries the 90-Day Done Right Promise in writing.
DIY or Call Us?
Safe to check yourself: shut off the supply at the valve, open the tank lid, and look for a warped flapper or mineral crust on the fill valve. You can also measure the rough-in from the finished wall to the center of the floor bolts. Toto standardizes at 12 inches, but the number on your floor is the only one that matters, and a tape measure costs nothing.
Where DIY goes wrong: pulling a toilet to reset the wax seal is where most owners end up with a cracked flange, a leak at the base, and water in the wall cavity of the addition they just built. An ADA or elevated flange in a tiled room requires the right extension kit. Same with replacing a shutoff valve on a live line. That’s a job for someone who does it weekly. If you’re unsure, close the supply, don’t force the bolt, and call (866) 814-4155 for a free estimate. No trip charge inside the county.
FAQs
Five to seven years for a genuine Toto valve, and two to four years for the aftermarket ones. Las Vegas water is hard enough that mineral scale is the failure mode, not wear, so a filter or softener extends the life noticeably. Call (866) 814-4155 for an exact quote; estimates are free.
Sometimes. A warped flapper is replaceable on its own for $30 to $60 in parts. A seized fill valve or a cracked flush tower is a full replacement, and the labor to try a repair first usually costs more than the swap. Call (866) 814-4155 and we’ll tell you which one you’re looking at before we charge anything.
Twenty minutes to an hour for a fill valve, flapper, or shutoff, and about 90 minutes for a toilet pull and reset with a new wax seal. A bidet seat swap is under 30 minutes. Toto parts are usually available same-day at plumbing supply in Las Vegas, so we don’t have to hold your job for a week.
We pull the model number from the tank label or the underside of the lid and order by that revision, not the model series. That matters because Toto has shipped at least three different flapper designs under the same Drake model number over the years, and the wrong one won’t seal. We don’t claim to carry parts on a truck; we source what your fixture actually needs. Call (866) 814-4155 to start with a free estimate.
If the Toto fixture in your new addition or ADU is acting up, don’t guess at the part. Call Barrett & Sons Construction at (866) 814-4155 for a free estimate. We pull every permit and get every inspection signed on the jobs that need them, and we put the price change in writing before any work moves. Ask anyone on your street, or look up the license number yourself.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.