A Barrett company - serving Las Vegas, NV

Schluter Bathroom Remodeling in Las Vegas, NV

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Bathroom Remodeling: The Las Vegas Owner’s Guide

We install Schluter-compatible bathroom remodeling in Las Vegas, and a full bathroom remodel typically runs $9,000 – $28,000 installed. Schluter isn’t a single part you replace – it’s the waterproofing system behind your tile (Kerdi membrane, Ditra uncoupling mat, Kerdi-Board, the shower tray and drain), so “replacing” it means rebuilding the wet areas it protects. Most Las Vegas owners find out something’s wrong when a grout line at the shower floor keeps turning dark, a tile sounds hollow when they tap it, or a soft spot shows up near the curb months after a remodel. That’s trapped moisture talking, and in our climate it shows up fast.

Call (866) 814-4155

Which Schluter Models This Applies To

Schluter systems are named by family, not serial number, so matching the right material starts with reading the printed strip on the roll or board edge. Kerdi waterproofing membrane comes in widths from about 3-1/4 inches up to 1 meter, and the roll is stamped with the product name and batch. Kerdi-Board panels are 1/2 inch, 5/8 inch, or 2 inch thick with the thickness printed on the edge. Kerdi-Line and Kerdi-Drain shower drains are sized by the grate and the bonding flange, and the flange dimension is the number that has to match your existing floor cutout – get it wrong and the drain won’t seat. Ditra mat is sold in 1/8 inch and 5/16 inch profiles, and mixing them on one floor throws off your tile height.

On the OEM question: Schluter’s own membranes, corners, and drain assemblies are the standard everyone else is measured against, and for a shower that has to stay watertight for decades we don’t substitute. The off-brands we see sold online are thinner and their fleece doesn’t grab thinset the same way. We’re an independent contractor and not affiliated with Schluter – we install their system because it works, and we’ll show you the labeled material before it goes on the wall.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Bathroom Remodeling Is Failing

  • Dark grout lines at the shower floor that won’t scrub clean. Water is getting past the surface and sitting in the setting bed, which means the waterproofing layer underneath has a breach or a bad seam.
  • Hollow-sounding tile when you tap it. A dull thud instead of a sharp click means the thinset didn’t bond. Over a Kerdi membrane that usually traces back to a seam that was overlapped the wrong direction or a membrane that got contaminated before install.
  • Grout cracking in straight lines across the floor. That pattern follows the backer-board joints, and it points to a missing or incorrectly installed uncoupling mat under the tile.
  • Loose or rocking shower drain grate. The drain assembly has worked free of the bonding flange, and once it’s moving, the seal around it is already compromised.
  • Musty smell or efflorescence at the curb and base. Moisture is trapped behind the tile with no way out. In Las Vegas’s dry air this shows up as white mineral bloom, and it’s the clearest early warning you’ll get.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A bathroom remodel in Las Vegas runs $9,000 – $28,000. A walk-in shower installation with a proper Kerdi system lands at $4,500 – $12,000, a tub-to-shower conversion at $3,500 – $10,000, and a shower replacement alone at $3,000 – $8,500. What drives the range is the size of the wet area, whether the drain has to be relocated (that’s a slab decision here, not a wall decision), and the tile you pick. The waterproofing materials themselves are a modest slice of the bill – labor and tile are the rest.

You get a written, line-item quote before we start. Every allowance and every price change is a written change order before the work happens. Permits are pulled and inspections signed on eligible jobs, and the whole thing is backed by our 90-Day Done Right Promise – if it’s not right, Tom comes back and fixes it on one call.

DIY or Call Us?

You can safely check a few things yourself: tap the tile for hollow spots, look for cracked grout at the floor and curb, run a fingernail along the caulk at the drain, and confirm whether the drain grate is solid. That’s diagnosis, not repair. Where this goes wrong for homeowners is the rebuild – a shower floor is a sloped, layered system, and one wrong overlap on a membrane seam or a drain flange set at the wrong depth means the water goes into the wall instead of down the drain. We’ve torn out plenty of DIY showers where the tile looked fine and the framing behind it was rotten. Safety note: no electrical or gas work belongs in this scope for a homeowner, and a slab drain relocation is not a weekend project.

Call (866) 814-4155 for a free estimate and a straight read on whether you’re looking at a repair or a rebuild.

FAQs

How long does a Schluter shower system last in Las Vegas?
Installed correctly, a Kerdi waterproofing system should outlast the tile above it – 25 to 30 years or more. Our dry heat is actually kind to it compared with humid climates, but our sun and slab movement put real stress on tile and grout, so the surface gets touched up long before the membrane underneath fails.

Can the failing part be repaired instead of replaced?
Sometimes. A single failed seam or a loose drain can be fixed without tearing out the whole shower, and we’ll tell you when that’s true. Once moisture has reached the framing or the setting bed is saturated, patching just delays the rebuild.

How long does the swap take?
A targeted repair is often a day or two. A full shower rebuild is a planned job, usually one to two weeks depending on tile and dry time – nobody rebuilds a shower same-day, and anyone who promises that isn’t doing it right.

How do you source the Schluter materials?
We match the labeled product to your existing system and source the correct membrane, corners, and drain flange for your layout. We don’t keep parts on a truck or in a warehouse – material is ordered to the job so it’s the right size and fresh.

KraftMaid, Cambria, and Silestone are among the brands we also work with on the cabinet and countertop side of a bath or kitchen.

Ready to stop guessing and get a real number? Call (866) 814-4155 for your free estimate – a live person answers around the clock, the quote is in writing, and every eligible job gets permits pulled and inspections signed. Barrett & Sons Construction Las Vegas, founded in 1998 and owner-operated, with our technicians bringing up to 28 years of experience.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch