Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Las Vegas Owner’s Guide
We install Schluter-compatible windows and doors across Las Vegas, and full window replacement typically runs $4,500 – $15,000 for a whole-home package, with impact-rated units at $8,000 – $25,000. Schluter-Shower-System-adjacent door frames and window assemblies are a specialty product line, so parts aren’t sitting on a shelf at a big-box store in Las Vegas – sourcing is the real bottleneck, not the install. That’s usually how owners find us: a door that won’t seal tight, a frame that’s pulled away from the wall, or a window that’s been leaking into the tile work around it after a summer thunderstorm pushed through the valley.
Barrett & Sons Construction is an independent contractor and not affiliated with Schluter. We’ve been installing premium windows and doors in Las Vegas since 1998, and our crew members have up to 28 years of experience with the brands and assemblies that hold up in desert heat.
Which Schluter Models This Applies To
Schluter is best known for tile-edge profiles and shower waterproofing, and their window and door systems show up in wet-area assemblies and bathroom remodels far more often than in a standard front-of-house window package. That means most of what you’ll be matching is the trim profile, drainage channel, or casing system around a window or door that sits in a wet zone – not the window unit itself. Before you order anything, find the printed stamp or label on the profile or channel, photograph it, and measure the reveal and depth to the millimeter. Schluter sizes run in tight tolerances, and a profile that’s 2mm off won’t seat right.
The OEM-versus-aftermarket call matters here. Schluter’s own matching parts guarantee exact fit and the waterproofing warranty, and for wet-area assemblies we usually recommend staying with OEM. Quality aftermarket trim and casing equivalents can work fine on dry interior windows where the profile is cosmetic. If your assembly is inside a shower enclosure or anywhere water reaches, the branded part is the safer spend. We also work with KraftMaid, Cambria, and Silestone on the cabinet and countertop side of the same rooms, so the finish line stays consistent.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
Las Vegas has one of the harshest swings in the country for window and door assemblies: 110°F summers and desert wind that drives grit into every seam. The failure signs are specific. Here’s what we see most:
- Water staining or soft spots at the tile seam around the window or door. The drainage channel or sealant line has failed and moisture is getting behind the assembly. Left alone, it rots the framing behind the finish.
- A door that binds or won’t latch cleanly in summer. Heat expansion is pushing the frame out of square, often because the anchoring or trim system has loosened. In Las Vegas, this shows up fast on west-facing doors.
- Visible gaps or a draft at the perimeter casing. The profile has pulled away from the wall or the gasket has dried and shrunk. Desert air and UV degrade rubber and sealant faster than most owners expect.
- Efflorescence or white crusty buildup on the tile near the frame. Minerals are migrating through the wet zone, which means moisture is passing somewhere it shouldn’t. This is a waterproofing failure, not a cosmetic issue.
- The trim profile is cracked, warped, or missing a section. Physical damage from settling, impact, or a bad prior install. Once the profile is compromised, the whole assembly loses its seal.
We regularly see door and window seal failures after the first monsoon push in July and August, when a slow leak that went unnoticed all spring suddenly shows up as a water stain.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed window replacement in Las Vegas runs $4,500 – $15,000 whole-home, and impact-rated window installation for the southern Nevada heat and wind load runs $8,000 – $25,000. Those ranges include the unit, the trim and casing assembly, sealant and flashing materials, labor, and cleanup. What drives the number up: impact-rated glass, custom sizes, second-story access, and any rot or framing repair found behind the old assembly once we open it up.
Our pricing is transparent the same way it’s structured: the parts line item and the labor line item are separate, and every scope change comes to you as a written change order before we start. Pricing is fixed up front with no change orders unless you approve them. Our written 90-Day Done Right Promise covers the work, and if something’s off, Tom comes back and makes it right on one call. Permits are pulled and inspections signed where the job requires it. Call (866) 814-4155 for a free estimate.
DIY or Call Us?
Some of this you can check safely yourself. Run a finger along the perimeter casing for soft spots, look for gaps or daylight, and note whether the door binds at different times of day. Photograph any label on the profile or channel. What we’d steer you away from is removing and re-seating the assembly or re-flashing a wet-zone window or door yourself. Improper re-installation is the single most common way a small leak becomes rotted framing, and it’s why we see so many “tried to fix it myself” jobs turn into larger repairs.
If you’re weighing it, call us for a free second opinion on any written estimate you’ve already received. We’ll tell you straight whether it’s a repair or a replace. Call (866) 814-4155 – a live person answers, 24/7. We also carry a permanent 10% Senior & Veteran discount, offer $40 off any repair over $200, and there’s no trip charge inside the county.
FAQs
Ten to fifteen years is realistic for sealant and gasket components in Las Vegas heat, and the structural frame and glass can go substantially longer if the wet-zone waterproofing is maintained. UV and 110°F summers age rubber and sealant faster than in cooler climates, so expect to re-seal before you replace the unit. Call (866) 814-4155 for a free inspection quote.
Often yes – a failed seal, gasket, or trim profile can be repaired without replacing the whole assembly, provided the framing and surrounding structure are sound. Once water has reached the framing or the unit is out of square, replacement usually makes more sense than a patch. We’ll tell you which one after we look. Call (866) 814-4155 for a free second opinion.
A single window or door assembly typically takes a day; a full-home window package in Las Vegas runs two to four days depending on count and access. Impact-rated or custom-sized units may add lead time for the part itself. We give you the timeline in writing before we start so there are no surprises.
We bring in the correct profile or assembly from authorized distributors based on the label or measurement on your existing part. Sourcing for a less common size can add a few days to lead time, and we tell you that up front. We never claim to have it on a truck – we order exactly what your assembly needs and confirm fit before installation. Call (866) 814-4155 to start the quote.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.