A Barrett company - serving Las Vegas, NV

IKO Windows & Doors in Las Vegas, NV

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Windows & Doors: The Las Vegas Owner’s Guide

If you have a failing IKO window or door component in Las Vegas, we install IKO-compatible windows and doors, with installed prices typically running $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated units. We are an independent contractor and are not affiliated with IKO. Most Las Vegas owners discover the problem the same way: a window that won’t latch when the afternoon sun hits it, a sliding door that drags on its track after a windy spring, or a seal that fogs up between the panes while the AC runs flat out in July. Those are the three we hear most. The good news is that they usually trace to a specific part, not a whole-house replacement.

Call (866) 814-4155

Which IKO Models This Applies To

IKO builds windows and sliding patio doors in several vinyl and aluminum product lines, and the part you need depends on which line you have. The fastest way to identify yours is the etched or stamped label in the upper corner of the glass or on the inside of the frame jamb. That label carries the model series and manufacturing date. Take a photo of it before you call anyone, including us. If the label is gone, measure the visible glass width and height, the frame depth, and the track profile if it’s a slider, and we can usually match it from those numbers.

Two gotchas come up in Las Vegas specifically. First, IKO sliding door rollers changed their wheel diameter and axle configuration across production years, so a roller that looks identical on a shelf may not fit a unit manufactured even a few years apart. Second, IKO window balances and sash locks are not interchangeable between the vinyl and aluminum lines. Matching the exact series matters more than matching the brand name.

On OEM versus aftermarket: OEM IKO parts guarantee a fit but take longer to source. Quality aftermarket equivalents, like a reputable balance or roller from a known manufacturer, often work just as well and cost less. We’ll tell you honestly which one your job calls for. We do not stock parts and we don’t carry parts on a truck, but we can source what your IKO unit needs. For other trades, we also handle KraftMaid, Cambria, and Silestone work, so a window job can fold into a larger project without a second contractor.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Windows & Doors Is Failing

  • Fogging or condensation between the panes. The insulated glass seal has failed, letting moist air in. Once the desiccant is saturated, the fog won’t clear, and you’re losing the thermal performance you paid for.
  • A window that won’t stay up or won’t latch. The balance mechanism has worn out or the sash lock has loosened. In Las Vegas heat, the vinyl can also warp slightly, throwing off the alignment.
  • A sliding door that drags or jumps the track. Worn rollers, a bent track, or grit from desert wind. A door that doesn’t close fully is both an energy loss and a security gap.
  • Drafts or visible daylight around the frame. Failed weatherstripping or a seal that has pulled away. Wind-driven dust through the gap also means your AC is working harder all summer.
  • Water stains or soft spots near the sill. A failed seal or flashing letting monsoon rain in. This one causes structural damage if you wait, so it’s the symptom to address first.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed window and door prices in Las Vegas depend on unit type, glass package, and how many openings you’re doing at once. Here are the ranges we quote from:

Job Installed Price Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Repair of a single part (balance, roller, seal) Quoted per job, often well under full replacement

What drives the range: number of openings, frame material, whether you need impact-rated glass, and whether the rough opening needs adjustment. Parts and labor are itemized in a written line-item quote, so you see the part cost and the labor cost separately. Every scope and allowance is in writing, and any change arrives as a written change order before work starts. Our crew members have up to 28 years of experience, and every job is backed by our written 90-Day Done Right Promise. If it’s not right, Tom comes back and makes it right.

DIY or Call Us?

Changing a window sash lock, cleaning a track, or replacing weatherstripping is reasonable to do yourself, and we’ll happily tell you over the phone whether your symptom sounds like one of those.

Where DIY goes wrong: window balances are under spring tension, and releasing the wrong one can snap back hard enough to break glass or cut a hand. Impact glass is heavy and awkward, and a dropped pane is a real injury risk. Sliding door rollers require lifting the panel out of the track, which goes badly on a unit that’s warped from Las Vegas heat. If the work means opening the frame, dealing with balance tension, or handling a full glass panel, that’s a two-person job with the right tools. A failed seal or a dragging door that’s been patched twice is usually the point to stop. Call (866) 814-4155 and we’ll help you figure out what your IKO unit actually needs before you buy a part that doesn’t fit.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch