A Barrett company - serving Las Vegas, NV

Atlas Kitchen Remodeling in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The Las Vegas Owner’s Guide

We install Atlas kitchen cabinetry, and the failing parts we get called out for most in Las Vegas are the hinges, drawer slides, and cabinet boxes themselves – not the doors. A full Atlas kitchen remodel runs $14,000 – $45,000 installed here, but most of the calls we take are for a single cabinet run or a hinge-and-slide refresh that costs far less. A smaller scope, like replacing one wall of Atlas cabinets or refacing a single run, usually lands in the $9,000 – $20,000 range. Every price we quote is line-item and written, and any change arrives as a signed change order before we touch a screwdriver. Call (866) 814-4155 for a free estimate.

Call (866) 814-4155

Owners usually figure out something’s wrong slowly. First a drawer sticks in summer. Then the soft-close stops closing soft. Then, by the third Las Vegas summer, the door sags and won’t line up with the one beside it no matter how many times you tighten the screws. That’s the picture we walk into most weeks.

Which Atlas Models This Applies To

Atlas has built kitchen cabinetry under several lines over the years, and the part that fits one series almost never fits another. Two cabinets that look identical from the front can take completely different hinges once you open the door. Before we quote a single hinge or slide, we identify the exact line from the sticker inside the cabinet door or on the back of a drawer box, the door overlay (full overlay vs. partial), and the cabinet depth. If the sticker is gone, we measure the hinge cup bore and the slide length and match from there.

The overlay is where most homeowners get burned buying online. Atlas full-overlay doors and standard partial-overlay doors use different hinge geometry, and a hinge that says “fits Atlas” in a listing often means one series only. The other catch: a good quality aftermarket hinge (Blum, Grass, or Hettich) will outlast the original in our climate and costs less than chasing down a discontinued OEM hinge. For doors and drawer fronts, OEM or exact-match replacement is usually the only path to a color and profile match on an older Atlas run.

We’re an independent service provider. We’re not affiliated with Atlas, and we don’t claim to be. We install Atlas-compatible cabinetry and hardware and we also work with KraftMaid, Cambria, and Silestone when a homeowner is ready to change the whole kitchen rather than patch it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

Here’s what we actually see when we open up an Atlas kitchen in Las Vegas, and what’s behind each symptom:

  • Doors that won’t stay aligned after you tighten the screws. The hinge plate screws are wallowing out the particleboard because the hinge has been pulled for years. The fix isn’t bigger screws; it’s new hinges and, if the holes are stripped, a plate repair or a new cabinet side.
  • Drawers that stick in July and slide fine in January. Las Vegas swings from single-digit humidity in summer to damp monsoon weeks in late summer. Particleboard and MDF boxes swell and shrink with that swing, and a cheap roller slide binds tight the whole time. Ball-bearing or undermount slides tolerate it far better.
  • Soft-close that slams. The damper in an Atlas soft-close hinge wears out after a few thousand cycles. It’s not a door problem, and replacing the door won’t fix it. The hinge assembly is the wear part.
  • Boxes separating at the joints. Water from a sink leak or a dishwasher, plus dry heat, will open up the glue joint at the cabinet corner. If the box is swollen or soft to the touch, the box needs replacing, not just gluing.
  • Sagging shelves and bowing bottoms. Standard 3/4-inch shelves in a 30-inch cabinet bow under a full load of dishes over time. Adding a stiffener or upgrading to a thicker shelf fixes it; a new shelf of the same thickness will do the same thing again in a few years.

The underlying theme in Las Vegas: heat and dry air are hard on glue and on cheap hardware. The wood itself holds up. The hinges and slides are what let go first.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Las Vegas for the work we do on Atlas kitchens:

Scope Installed range
Full kitchen remodel (Atlas cabinetry, counters, install) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation (single run or wall) $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet count and linear footage, whether we’re replacing boxes or just doors and hardware, counter material, whether the electrical has to move for the island, and whether the current layout is workable. Every quote is line-item, with an allowance written down for anything we can’t price until we see it. There are no surprise invoices, because an allowance that isn’t on paper is a surprise waiting for a date. Every eligible job gets permits pulled and inspections signed, and the whole thing is backed by our 90-Day Done Right Promise – if it’s not done right, one call brings Tom back.

DIY or Call Us?

Some of this you can safely handle. Swapping a hinge or a drawer slide, tightening a loose door, adding a shelf stiffener: those are homeowner jobs, and if you know your Atlas series and the overlay, an aftermarket slide or hinge is a reasonable weekend project. Where DIY goes wrong is at the cabinet box and at anything tied to the electrical or a gas line. Pulling a wall of cabinets to fix a swollen box often means finding a hidden water leak, moving a receptacle, or discovering the wall wasn’t finished where the old cabinet sat. None of those are the place to be guessing, and none of them are dangerous to skip past – they’re just expensive to get wrong twice. If the box is soft, the drawer frame is separated, or the cabinet sits where the island wiring runs, call us at (866) 814-4155. Estimates are free, and a free second opinion on any written estimate you already have is one of our standing offers.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch