Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Las Vegas Owner’s Guide
A Tamko bathroom remodel in Las Vegas typically runs $9,000 – $28,000 installed, depending on how much tile, waterproofing and fixture work the room needs. We install Tamko-compatible systems across the valley and quote firm pricing in writing before work starts. Most owners land on this page after a small leak or a soft spot shows up under a shower or tub surround, and they want to know whether the waterproofing under the tile is the culprit. In Las Vegas, that failure usually traces back to tile set over a membrane that was never rated for the desert’s dry-then-wet swing, which cracks the bond and lets water past the surface.
Barrett & Sons Construction Las Vegas is an independent contractor, not affiliated with Tamko. We install Tamko products and the compatible materials that work alongside them.
Key Takeaways
- Tamko bathroom systems in Las Vegas run $9,000 – $28,000 installed.
- Most failures trace to waterproofing under the tile, not the brand of tile itself.
- Water intrusion in a bathroom spreads fast through Las Vegas homes built on slab.
- Every price change on our remodels arrives as a written change order first.
Which Tamko Models This Applies To
Tamko makes roofing and waterproofing systems, so the “bathroom” side of this is really about how those waterproofing products get used under a wet area. If you’re looking at a Tamko product label near a shower pan or behind a tile wall, you’ll want to identify it by type first: a sheet-applied membrane, a liquid-applied waterproofing, or a shower pan liner. Each has a different acceptable substrate and cure window, and mixing them up is where the trouble starts.
The compatibility gotcha most Las Vegas homeowners hit: a liquid-applied Tamko waterproofing and a sheet membrane are not interchangeable over the same substrate, and a crew that swaps one for the other mid-job without a written change is setting you up for a pinhole leak. Match the product to the substrate and the room’s vapor condition before ordering.
To identify what you have, look for the label on the backer board or membrane wrap, measure the panel width and thickness, and note the installation date if it’s on the packaging. OEM Tamko accessories and quality aftermarket equivalents exist for most of these parts. For wet-area waterproofing we lean OEM because the warranty turns on using the matching components. For aftermarket we’ll only go there when the spec sheet matches. If you also need fixtures and finish, we install the same premium brands across every trade, including KraftMaid, Cambria and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
Waterproofing failures in Las Vegas show up fast because our dry air pulls moisture out of the grout, then the wet season pushes it back in. Here’s what to check:
- Grout that darkens and won’t dry out. That’s moisture sitting in the subfloor, usually a membrane bond failure. The grout is the messenger, not the cause.
- A soft spot or spongy floor at the shower threshold. The liner or pan is letting water past the curb. In slab homes this corrodes the anchor screws before it shows a stain.
- Peeling paint or bubbling texture on the wall opposite the shower. Vapor is escaping through the wall cavity. The membrane on the wet side has a breach.
- A musty smell that comes back after cleaning. That’s mold in the substrate, not on the surface. Bleach on tile won’t fix it.
- Tile that sounds hollow when tapped. The thinset lost its bond, often at the membrane transition. That’s the seam letting go.
The pattern matters: a single symptom is likely surface wear, but two or more together point to the waterproofing underneath, and that’s a tear-out, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Tamko-compatible bathroom remodeling in Las Vegas runs $9,000 – $28,000. The number moves with three things: the size of the wet area, whether the substrate needs replacement, and the finish level of the tile and fixtures you choose.
- Walk-in shower install: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Vanity installation: $800 – $3,000
- Small bathroom remodel: $5,000 – $12,000
That includes waterproofing, tile, setting materials and the labor to tear out the old system. Parts and labor are separate lines on the quote, so you can see what you’re paying for. Every job is backed by our 90-Day Done Right Promise, written on the contract. If something’s not right, one call brings us back.
DIY or Call Us?
You can safely check your work by lifting a tile at the shower threshold or looking behind the wall from the closet side. That tells you whether the membrane is compromised. What you shouldn’t do yourself is the tear-out and re-waterproofing. Getting the membrane bond right on a Las Vegas slab means knowing the cure window and the substrate condition, and a DIY waterproofing failure won’t show up until the leak is already in the wall.
We’ll pull the permit and pass the inspection on every eligible job. Call (866) 814-4155 and a live person answers, any hour. If you’re within the county, there’s no trip charge for the estimate, and we’ll give you a free second opinion on any written bid you already have.
FAQs
A properly installed Tamko-compatible waterproofing system should last 20 – 30 years before the membrane fails. The wildcard is heat: Las Vegas swings between dry winter air and summer humidity spikes, and that cycle stresses the membrane bond faster than in a mild climate. Done right on a sound substrate, it holds. Done over a compromised pan, it may fail within a few years. Call (866) 814-4155 for an exact quote on your room; estimates are free.
Sometimes, if the failure is isolated to a small area and the rest of the membrane tests sound. A localized patch is realistic when the leak is at a single seam and the substrate underneath is dry. If water has spread, or the pan and wall membrane both show failure, repair just delays the tear-out. We’ll tell you which one you have after we open it up.
A shower or tub conversion typically runs 1 – 2 weeks, and a full bathroom remodel runs 3 – 4 weeks in Las Vegas. The timeline depends on whether the permit inspection falls mid-week and whether the substrate is dry when we open it. We put the schedule on the contract, and any change to it comes in writing before work moves.
We spec the Tamko product and its matching components to your specific install, and we order the correct substrate and setting materials for the room. We don’t claim to stock parts or carry them on a truck; every order is made to the job. When we hand you a quote, the part numbers are on it. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.