A Barrett company - serving Las Vegas, NV

Boral Roofing in Las Vegas, NV

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Roofing in Las Vegas: The Owner’s Guide

If you own a Boral roof in Las Vegas and something has failed, you’re in the right place. We install and repair Boral-compatible tile and slate roofing across the valley, and a roof repair on a Boral system typically runs $400 – $1,800 for isolated work like a cracked tile, a broken fastener, or a flashing detail. A full roof replacement on a Boral tile system runs $8,000 – $20,000, depending on square footage, profile, and how much of the underlayment and flashing needs to be brought back up to standard.

Call (866) 814-4155

Owners usually find out about a failing Boral roof one of two ways. Either a tile slides off in a wind gust during monsoon season and cracks on the patio, or a ceiling stain shows up after a heavy July rainstorm and the source traces back to a cracked tile or a lifted fastener under the field. Rarely does a Boral roof fail all at once. It shows its age in a specific place, and that place is usually fixable. We’re an independent roofing company, not affiliated with Boral, but we know these materials and what fails on them in Las Vegas.

Which Boral Models This Applies To

Boral makes a wide spectrum of roof tile – from the classic Spanish S-profile and Saxony flat-shake profiles to the lighter-weight composite slate lines. The most common Boral families you’ll see on Las Vegas homes are the S-Series concrete tile, the flat profile lines (Saxony, Capri), and the composite slate products. Your tile could be one of several profiles within a product family, and profile matters for ordering the right piece.

Here’s how to identify what you have. Look at the profile in cross-section: S-profile tiles are wavy; flat-profile tiles lie in a smoother field; shake-profile tiles mimic wood. Measure the tile at the widest point (Boral tiles typically run in a consistent width but the field tiles vary by profile). On the back of a loose tile you’ll often find a stamp or a printed marking indicating the manufacturer and, sometimes, the profile name. If there’s no stamp, the thickness and profile shape are your best identifying features.

For repairs, the decision is usually OEM versus a quality aftermarket match. OEM Boral tile is preferred when the repair is visible – a sunset-facing slope where neighbors will notice a mismatch. For hidden repairs or repairs under heavy sun exposure, a quality aftermarket tile that matches the profile and thickness is a practical option, but it needs to match well enough that the next roofer doesn’t mistake it for a different system. We source both. We don’t carry parts on a truck; every Boral-compatible part is sourced after we’ve inspected and identified what’s actually under your tiles.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Roofing Is Failing

Las Vegas heat and sun are hard on a roof. We see certain Boral failure patterns here more than in cooler climates. Here are the most common:

  • Cracked or shattered tiles after a summer heat cycle or a monsoon windstorm. Concrete tile is durable, but a great many cracks trace back to windborne debris or thermal shock on a tile that had a hairline from an earlier hit. A single cracked tile isn’t cause for panic – a pattern of cracked tiles in one area is worth a look.
  • Slipped or displaced tiles after a wind event. When fasteners have backed out or the tile has lifted over a fastener point, the next windstorm repositions it. If tiles slide out of line after a windy summer, the fix is usually fastening and re-seating, not a new roof.
  • Granule loss and surface wear on composite slate or coated tile. Boral composite products and some coated concrete lines lose surface granules over time; heavy sun exposure in Las Vegas accelerates it. If your roof surface looks patchy or you’re finding grit in the gutter, the tile’s protective layer is wearing.
  • Interior ceiling stains, especially after a summer storm. This usually means water is getting under a tile or through a failed flashing detail. The tile may not be the problem – the underlayment or a sidewall flashing can be the culprit, and in NH winters doesn’t apply here, but in Vegas the culprit is almost always a cracked tile, a lifted fastener, or a flashing detached from the wall.
  • Visible sagging or soft spots on the deck. If the sheathing under the tile feels soft from inside the attic or the roof line has a visible dip, moisture has reached the deck. That goes beyond tile repair and needs a full inspection.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roof repair on a Boral tile system in Las Vegas runs $400 – $1,800. That covers removal and replacement of the failed tiles, inspection and repair of the underlayment and fasteners underneath, and a water test so you know the repair actually holds before we leave. Small scopes – a handful of tiles and a flashing repair – land at the low end. Larger scopes with more tile replacement, flashing work, and deck repair climb toward the higher number.

Full roof replacement on a Boral tile system runs $8,000 – $20,000. What drives that range: total roof square footage, the profile (composite and slate lines cost more than standard concrete S-tile), the pitch of the roof, how much of the underlayment and flashing needs replacement, and whether any decking needs to be replaced before tile goes back down.

Here’s the honest part. Every scope, allowance, and price change on a Barrett & Sons job arrives in writing before work starts. We don’t quote one number on the phone and hand you a different bill at the door. Every scope change is a written change order, and every price change is documented before work proceeds. If a tile repair turns up decking damage that wasn’t visible from the outside, you’ll see a written change order with a photo before we go further. Every eligible job gets a permit pulled and an inspection signed; on a tile roof repair, a permit isn’t always required, but on a full replacement it is, and we pull it. All work is backed by our written 90-Day Done Right Promise.

Scope Price range (Las Vegas)
Tile roof repair (cracked tiles, flashing, fasteners) $400 – $1,800
Tile roof repair (larger scope, deck repair) $600 – $2,500
Full roof replacement (Boral tile system) $8,000 – $20,000

DIY or Call Us?

Some of this you can check safely yourself. Walk the perimeter of the house and look up at the roof after a windstorm; tiles that have slid out of line are visible from the ground. Look at the ceiling inside after a rain for stains or discoloration. Check the attic for soft decking or daylight showing through. Those checks cost nothing and tell you how big the problem is.

What you shouldn’t do is get on the roof. A Boral tile roof is steep and the surface is unforgiving; a fall from roof height is serious, and walking a tile roof to inspect a cracked tile can crack more tiles under your weight. Leave the roof walking, tile lifting, and fastener work to someone who does it regularly and is insured for it. If you know something’s wrong and you can’t see it from the ground, call us at (866) 814-4155 – we’ll get an inspection scheduled and give you a written scope before any work begins. No trip charge inside the county, and the estimate is free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch