A Barrett company - serving Las Vegas, NV

Boral Kitchen Remodeling in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Kitchen Remodeling: The Las Vegas Owner’s Guide

Boral kitchen remodeling in Las Vegas typically runs $14,000 to $45,000 for a full kitchen and $9,000 to $20,000 for a smaller galley or condo kitchen, with countertops and backsplash work quoted separately as line items. Boral doesn’t make kitchen cabinets the way KraftMaid does, so most Boral material in a Vegas kitchen shows up as surface product, trim, and manufactured components you match to a model line rather than a single “Boral kitchen.” Owners usually figure this out the hard way: a backsplash panel chips at a switch plate, a countertop edge delaminates near the dishwasher, or a panel seam lifts in a kitchen that gets direct west sun from 3 p.m. on. Once you’re holding a cracked piece and a model sticker, the questions are the same – can this be matched, what does it cost, and how fast can it be swapped.

Call (866) 814-4155

Key Takeaways

  • Full Boral-based kitchen remodeling in Las Vegas: $14,000 – $45,000; small kitchens $9,000 – $20,000.
  • Boral is primarily a surface and building-products brand – matching starts with the model or series code on the back of the panel or edge of the slab.
  • Las Vegas heat cycling and dry air are hard on seams and adhesives; panel failures cluster on sun-facing runs.
  • We’re an independent contractor. We install and replace Boral-compatible products. We are not Boral and don’t speak for them.
  • Out-of-stock or discontinued Boral lines are the #1 reason a swap turns into a partial remodel.

Which Boral Models This Applies To

Boral’s kitchen-relevant output is mostly in manufactured surfaces, trim, and panel product, not framed cabinetry. That means the matching work happens on the back of the piece, not on the front. Flip a loose backsplash panel or look at the underside edge of a countertop section and you’ll usually find a stamp or label with a series name and a run or batch code. Photograph that label before anything else. It’s the single most useful thing you can do for us.

Boral has revised and retired lines over the years, and a label that says one series may not correspond to anything currently produced. This is the compatibility gotcha that bites homeowners: two panels can look identical on the face and have different core thickness or edge profiles, and a 1/16-inch difference in a butt joint against an existing cabinet run is visible from across the room. We measure the actual thickness, edge profile, and face dimension of your existing piece and match to what’s available, not to what a photo looks like.

The OEM-versus-aftermarket call matters here. A true OEM match is the safest route when your line is still in production. When it isn’t, a quality aftermarket panel in a comparable face and thickness is often the honest answer – and sometimes the better one, because a current product line will still be around if you need a second piece down the road. We’ll tell you which situation you’re in before you spend a dollar.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Kitchen Remodeling Is Failing

  • Seam separation along a countertop or panel joint. Adhesive loses grip as the material expands and contracts through Vegas day-night swings. A hairline gap in March is a 1/8-inch gap by August.
  • Chipping at cut edges, switch plates, or outlet openings. Often the original install was cut with a dull blade, which leaves micro-fractures that spread. Sun-facing backsplash runs near a west window chip first.
  • Delamination or lifting at the dishwasher and range. Steam and heat cycling attack the bond line. Once a corner lifts, water gets behind it and the failure accelerates.
  • Fading or color shift on sun-exposed panels. Las Vegas gets roughly 290 sunny days a year, and UV exposure on a south or west run is relentless. A panel that reads slightly pink next to its neighbor is telling you something.
  • Loose or hollow-sounding sections when you tap them. That’s usually a failed adhesive bed or a fastener that pulled out of drywall. It’s a sign the install, not the material, is the problem.

Replacement Cost & What’s Included

Honest installed pricing for the work around Boral-compatible kitchen material in Las Vegas:

Scope Installed Range
Full kitchen remodel (Boral surfaces + new cabinetry layout) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation (KraftMaid and comparable lines) $4,000 – $13,000
Countertop installation (Boral-compatible or Cambria/Silestone) $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: whether your Boral line is still in production, how much existing material has to come out intact, cabinet condition behind the surface, and whether electrical or plumbing has to move. Every allowance and every scope change goes on paper as a written change order before we touch the job. No surprise invoice at the end. Completed work is backed by our written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do a few things yourself. Photograph the model label. Measure the thickness and edge profile of the failed piece with a caliper or a good ruler. Note the run length and where the failure starts. Tap along the panel line and mark the hollow spots. All of that saves us time and saves you money on the estimate.

Where homeowners get into trouble is cutting and fitting a new panel against an existing run. A backsplash cut around a switch plate looks simple until the blade grabs and the face chips, and now you’ve got two problems. Countertop sections around a sink or range are heavier and more rigid than they look, and a dropped piece damages cabinets and floor. If a gas line or a 240V range circuit sits in the wall behind the material, that’s a stop-and-call situation, full stop.

Call (866) 814-4155 and we’ll tell you straight what’s a weekend job and what isn’t. Estimates are free, and a second opinion on a written estimate you already have costs you nothing.

FAQs

Get a Free Estimate on Your Boral Kitchen Work

If you’ve got a failed Boral panel, a seam that’s opening up, or a kitchen that needs the surfaces replaced right, call Barrett & Sons Construction Las Vegas at (866) 814-4155. We’re owner-operated, we pull every eligible permit and get inspections signed, and every price change arrives as a written change order before work moves. Bring us the photo of the label and we’ll get you a real number. Standing offers you can use today: $40 off any repair over $200, a free second opinion on any written estimate, and no trip charge inside the county. Senior and veteran discount is permanent, 10%, always.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch