A Barrett company - serving Las Vegas, NV

PGT Windows & Doors in Las Vegas, NV

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Windows & Doors: The Las Vegas Owner’s Guide

We install and repair PGT windows and doors across the Las Vegas valley, and most of the work we do on them is hardware and weather-seal replacement rather than full-unit swaps. A single failed PGT part – a balance, a multi-point lock, a roller, a glazing bead – usually runs between $180 and $650 installed depending on the series, while a full window replacement in Las Vegas runs $4,500 to $15,000 and impact-rated installation runs $8,000 to $25,000. We don’t keep parts stock and we don’t carry them on a truck; we identify the exact part, order it for your unit, and schedule the install.

Call (866) 814-4155

Owners usually find us after a window that won’t stay up, a slider that grinds instead of glides, or a door that lets in fine desert grit along the bottom track. PGT builds a lot of the aluminum and vinyl units in this valley, so we see the same few failure points over and over. The heat and the dust find the weakest part first, and it’s rarely the glass.

Which PGT Models This Applies To

PGT’s residential lines split into a few families that matter for parts. WinGuard and WinGuard Vinyl are impact-rated and common on newer Las Vegas construction. Architectural Series covers aluminum units, and the PremierVue and EnergyVue lines turn up in vinyl new-build and replacement work. The parts are not interchangeable across these families, and that’s where most owners get stuck: a balance from a WinGuard Vinyl sash won’t fit an aluminum Architectural Series opening, even at the same glass size.

To identify your part, find the PGT label on the glass edge or the frame jamb. It lists the series and often the unit size. If the label is gone, we measure the sash, the track depth, and the pivot points, because PGT has changed balance and roller geometry within the same product family over the years. That’s the compatibility gotcha on these units – two windows that look identical from the curb can take different hardware. On the OEM-versus-aftermarket call, we lean OEM for impact-rated units, since the assembly was tested as a system. For standard vinyl balances and rollers, a quality equivalent often works fine and costs less.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Windows & Doors Is Failing

  • A sash that won’t stay up when you open it. The balance or spiral rod has lost tension. In Las Vegas heat, the balance tube’s internal spring fatigues faster than in milder climates, and it gives out long before the glass does.
  • A slider or patio door that grinds or jumps the track. Rollers have flattened or the track has filled with grit. Desert dust works into the roller housing and the track channel, and once the wheel stops turning it starts skidding and wearing flat.
  • A door that won’t latch or seal at the multi-point lock. The lock rod or gear has worn or slipped out of adjustment. This shows up as a handle that flops or a door that pulls away from the jamb at the top or bottom.
  • Draft or dust along the bottom of a door. The sweep, weatherstrip, or pile seal has dried and cracked. UV exposure breaks down the seal material on sun-facing units within a few seasons.
  • Fogging between the panes. The sealed glass unit has lost its seal. That’s a glass replacement, not a hardware part, and impact-rated PGT units are matched assemblies, so the replacement glass has to meet the same rating.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how installed pricing runs for PGT parts and related work in Las Vegas:

  • Balance, roller, or weatherstrip replacement: $180 to $400
  • Multi-point lock or handle set: $250 to $650
  • Door sweep or threshold seal: $180 to $450
  • Fogged impact glass unit replacement: $400 to $900 per unit
  • Full window replacement: $4,500 to $15,000
  • Impact window installation: $8,000 to $25,000

What drives the range: how many units, whether the part is OEM or an equivalent, and whether the door or window needs adjustment while we’re in it. Our quotes are line-item and written. If we open a unit and find something we didn’t expect, you get a written change order before we proceed – no surprise invoice at the end. Labor is included in the ranges above, and every job is covered by our written 90-Day Done Right Promise. We’re an independent service provider, not affiliated with PGT.

DIY or Call Us?

Some of this you can check yourself. Look for the PGT label, wipe out the door track with a vacuum and a damp rag, and test the sash weight by hand. Replacing a weatherstrip or a door sweep with a like-for-like part is a reasonable afternoon job if you’re comfortable with a screwdriver and careful measuring.

Where it goes wrong: impact-rated units and multi-point locks. Impact glazing is a tested assembly, and pulling the wrong bead or seating glass incorrectly can compromise the rating. Multi-point lock gear has to be adjusted to the door’s specific reveal, and a misadjusted rod will bind and crack the lock body.

If the sash won’t stay up, the door won’t latch, or you can’t find a matching part, call us at (866) 814-4155. We’ll identify the part, quote it in writing, and schedule the install. Estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch