A Barrett company - serving Las Vegas, NV

PGT Kitchen Remodeling in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Kitchen Remodeling: The Las Vegas Owner’s Guide

PGT-brand kitchen components in a Las Vegas home usually need full replacement rather than part repair, and a complete kitchen remodel here runs $14,000 to $45,000 installed, with smaller kitchens landing between $9,000 and $20,000. We’re an independent contractor, not affiliated with PGT, but we work on the cabinet lines, door hardware, and window-and-door elements that PGT supplies into Las Vegas kitchens. Most homeowners call us after a cabinet run starts sagging, a drawer glide gives out for the third time, or a sliding door stops tracking square.

Call (866) 814-4155

The discovery is almost always the same. You open a drawer and it drops. A cabinet door hangs crooked and won’t adjust back. A pantry slider binds halfway. By the time you call, you’ve already tried tightening screws and swapping a glide or two, and the fix didn’t hold because the failure is in the box or the frame, not the hardware.

Which PGT Models This Applies To

PGT makes windows and doors as its core business, and its kitchen-facing products show up most often as sliding glass doors, casement windows over sinks, and the door-and-window packages that get bundled into kitchen remodels. If your kitchen has a PGT slider or a PGT window that no longer seals, tracks, or opens smoothly, that’s where we see the real failure. We don’t stock PGT parts and we don’t carry them on a truck, so the first step is identification. Look for the manufacturer label on the door or window frame, usually a small etched or printed tag in the jamb or on the glass edge, and note the series and size.

Here’s the compatibility gotcha that trips people up: PGT slider panels are sized to the frame opening, not to a universal standard, and a replacement panel from one series will not fit another. Measure the rough opening and the panel height and width to the sixteenth of an inch before you order anything. On the OEM-versus-aftermarket question, PGT replacement parts are the safe match when your unit is still under manufacturer coverage or when the frame is in good shape. For older units where the frame has aged out, a quality aftermarket door or window at the same opening size often costs less and performs as well. If your kitchen also needs cabinets or counters, we install KraftMaid and Cambria, and we can talk through Silestone as another option.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Kitchen Remodeling Is Failing

Las Vegas heat and dust do a number on kitchen components, and PGT units in particular show predictable failure patterns. Watch for these five:

  • The slider drags or jumps the track. In our climate, dust and grit collect in the lower track and the rollers flatten under load, so the panel binds instead of gliding. Left alone, the roller housing cracks.
  • A cabinet door won’t stay closed or hangs low. The hinge plate has pulled from softened wood or the hinge itself has worn. Once the screw holes strip, tightening won’t fix it, and the door needs a new mounting point or a new hinge style.
  • Drawer glides fail one after another. Repeated failure across several drawers usually means the glide rating doesn’t match how the drawer is loaded, not that you got a bad batch.
  • Glass fogs between the panes on a PGT window. The seal has failed, letting moisture in. This is a unit replacement, not a cleaning job, and the fog only gets worse.
  • The door or window no longer seals against the frame. Gaskets and weatherstripping harden and shrink in the desert sun, and you feel the heat gain before you see the gap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what PGT-related kitchen work runs in Las Vegas, with parts and labor broken out so you know what you’re paying for:

Work Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet box quality and count, whether the layout changes, whether a slider or window has to be reframed, and counter material. We put scope and allowances in writing and issue a written change order before any price moves, so the number you sign is the number you pay. Every eligible job gets permits pulled and inspections signed, and every completed job is backed by our 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself. Confirm the PGT label and series, measure the opening, clean and lubricate a slider track, and tighten cabinet hinges. Where DIY goes wrong: forcing a track back into alignment can crack the roller housing, and prying at a fogged window unit risks breaking tempered glass. Replacing a slider panel or reframing an opening isn’t a homeowner job, and we’d rather you not risk injury or a bigger repair. Our crew members have up to 28 years of experience, and we answer the phone with a live person, 24/7. Call (866) 814-4155 and we’ll set up a free estimate.

FAQs

How long does a PGT slider or kitchen window last in Las Vegas? Expect 15 to 20 years before seals, rollers, or the frame itself give out, though direct desert sun on a west-facing unit can shorten that. If yours is past that mark and fogging or dragging, replacement is the better spend than chasing parts.

Can a failing part be repaired instead of replaced? Sometimes. A roller, hinge, or gasket can be swapped if the frame and panel are sound. Once the frame is warped, the glass seal has failed, or the cabinet box is failing, repair won’t hold.

How long does the swap take? A single slider or window replacement is typically a day. A kitchen remodel runs weeks depending on scope and counter lead times. We’ll give you a written schedule with your estimate.

How do you source the part? We identify your PGT series from the label and measurements, then source the correct OEM part or a quality matched replacement. We don’t stock parts locally, so we confirm availability before work is scheduled. Call (866) 814-4155 for a free estimate and a written quote.

When a PGT kitchen component in your Las Vegas home has failed, the fastest path to a straight answer is a call. We’ll look at what you have, tell you plainly whether it’s a repair or a replacement, and put the number in writing. Call (866) 814-4155 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch