Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Las Vegas Owner’s Guide
PGT bathroom remodeling work in Las Vegas – the labor and installation side of bath upgrades using PGT-compatible products – typically runs $9,000 – $28,000 installed for a full bathroom remodel, and we can usually get a crew to a failing shower valve or a bathroom door that won’t track on the next business day. We install and repair the PGT parts that fail in Southern Nevada bathrooms: shower pans, sliding door tracks and rollers, shower surrounds, and bath window components. Owners usually find us after a slow leak stains the ceiling below, a slider jumps its track, or a door roller quits and the enclosure won’t close flush anymore. And yes – we’re an independent Las Vegas contractor, not affiliated with PGT, and we say so up front.
Which PGT Models This Applies To
PGT has been building under a few nameplates, and the bathroom lines many Las Vegas homes carry fall under PGT, CGI, and WinDoor window and door products – the WinDoor name matters because a lot of Nevada builders set it during the mid-2000s boom, and replacement parts don’t interchange between them. If your bathroom window or slider tag reads WinDoor, order against that label, not the PGT warranty sheet stuffed in the kitchen drawer.
Find the permanent label before you buy anything. It lives on the window frame jamb or the top track of a shower slider, and it gives you the series and glass code. Measure opening width and height at the frame, not the glass, and note the glass tint code – Nevada sun and desert dust wear on a different schedule than the coastal markets these products were designed against, so a lightly built aftermarket roller can fail inside two summers here. OEM gives you an exact fit and a clean warranty path. A good aftermarket equivalent can save money on a small part where fit is forgiving. For anything structural, stay OEM.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
Each of these points to a specific failed component. Catching them early keeps a small part swap from turning into a remodel.
- A ceiling stain below the bathroom. The shower pan seal or the drain gasket has given up. Desert heat cycling on a pan that sits over a framed floor is a common cause, and the stain usually shows up in the room below before you notice water on the tile.
- The shower door drags or jumps its track. The roller bearings are shot or the bottom track has mineral scale packed into it. Las Vegas hard water leaves heavy calcium deposits that grind a roller down faster than anything else in the house.
- The slider won’t latch or sits crooked. The track has bowed or a screw has backed out of the jamb. Once the door stops closing flush, the seal leaks water onto the floor on every shower.
- Fogged or failing glass in a bath window. The seal in the insulated glass unit has failed, and the haze is moisture trapped between the panes. On a desert home facing west, the sun and heat load push this failure faster than most owners expect.
- Peeling caulk or a loose surround tile panel. The substrate behind the surround has gotten wet and the adhesive has let go. Left alone, this grows into soft framing, which is where a small repair becomes a full bathroom remodel.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
These are honest, installed ranges for Las Vegas. Parts and labor are broken out in writing before we start, and every price change comes as a written change order – no surprise line items at the end.
| Item | Installed Range |
|---|---|
| Full Bathroom Remodel (PGT-compatible) | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the range: the size of the bath, whether the pan needs reframing, how much tile you’re replacing, and whether we’re pulling the shower surround or keeping it. Every eligible job gets the permit pulled and the inspection signed. Work comes backed by our written 90-Day Done Right Promise – one call and we’re back to make it right.
DIY or Call Us?
You can safely check a lot of this yourself. Pop the top track off a shower slider and look at the rollers. Sniff out a ceiling stain and trace it. Read the label on your PGT or WinDoor frame and write down the series and glass code. That’s the easy half.
Where it goes wrong: resealing a shower pan or a drain gasket that’s already leaking, swapping gas or electrical fittings near a wet bathroom, and resetting a bowed shower track that needs the wall opened to fix. That’s the point where a weekend job turns into water damage and a bigger bill. Get a free second opinion on any written estimate you’ve already been handed – we’ll tell you straight. Call (866) 814-4155.
FAQs
How long does PGT bathroom remodeling last in Las Vegas? In Southern Nevada, expect around 10 to 15 years out of a shower pan or surround before the heat cycling and mineral scale start to catch up, and glass-seal failure on a west-facing bath window can show up in under a decade. Prioritize the water-seal parts first – that’s where the damage spreads.
Can you repair it instead of replacing it? Often, yes. A single failed roller, a bowed track, or a fogged glass unit can be replaced on its own without tearing into the whole bathroom. We’ll tell you honestly whether it’s a part swap or a real remodel. Call for a free estimate.
How long does the swap take? A parts-level fix like a slider track, roller, or glass unit is usually a half-day or less. A full bathroom remodel runs longer, and you get a written timeline before we start. Call (866) 814-4155 to schedule your free estimate.
How do you source the right part? We read the label on your frame, match the series and glass code, and order against it – OEM where fit matters, a quality aftermarket equivalent where it’s forgiving. We’re an independent Las Vegas contractor, not affiliated with PGT, and we tell you exactly which path we recommend and why.
Whether it’s a fogged PGT bath window, a shower door that won’t close, or a full remodel, we’ll put the scope, the allowances, and the price in writing before anyone lifts a tool. We also carry trusted names like KraftMaid, Cambria, and Silestone for the finishes that go around the fixtures. Serving Las Vegas and nearby areas with a 90-Day Done Right Promise on every job. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.