Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Las Vegas Owner’s Guide
Fence installation in Las Vegas typically runs $3,500 to $9,000 for a standard residential run, and that figure covers removal of the old fence, posts set in concrete, and materials suited to our desert ground. Most owners call us after the windstorm that finally took out the back run, or after a post heeled over in the caliche and started dragging the panels with it. You’ll see it first as a gate that won’t latch clean, then panels leaning off plumb. By the time a horizontal rail pulls loose from the post, the whole span needs resetting. We install throughout Las Vegas with permits pulled where the job qualifies, and every price is written down before we break ground.
Which CGI Models This Applies To
CGI fence runs come in wrought iron, ornamental aluminum, and chain link, and the post-and-panel hardware is not interchangeable between them. The surest way to identify what you have is the post cap and the panel bracket profile. Ornamental aluminum CGI runs usually carry a stamped number on the inside of the post cap or a tag stapled to the inside of the bottom rail; measure your post spacing and panel height as a backup, because a 6-foot panel won’t retrofit to posts spaced for 8-foot rails. On the OEM question: factory-direct CGI hardware matches the original rail profile and gets the panels sitting square the way the manufacturer designed them. A quality aftermarket bracket can save you money but often needs a shim to lock a panel flush, and that shim is where wind rattle starts in a Las Vegas summer. We’re an independent installer and not affiliated with CGI, so we’ll tell you plainly which route fits your existing run and which doesn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
- Posts leaning or pulling from the ground. Las Vegas soil and the settling that comes after a wet monsoon season create voids around set posts. Once the post moves, every panel between it and the next post goes out of level.
- Gate sagging and refusing to latch. The gate hinge post carries the most load in any run and is the first post to loosen in our heat-and-cold swings. A gate that drags is telling you the post has shifted, not the hinge.
- Panels rattling in the wind. On ornamental aluminum CGI runs, worn panel clips or a loosened bottom rail let panels chatter in our gusty spring afternoons. That chatter speeds up wear at every fastener.
- Rust bleeding at welds and fasteners on iron fencing. Wrought iron and painted steel rust worst where moisture collects: at welds, at the bottom rail just above the dirt, and at anchor bolts. Our dry climate slows rust but doesn’t stop it once it starts at a seam.
- Chain link sag and bent top rail. A sagging top rail or stretched fabric usually starts with a loosened tension band or a bent line post. Damage from falling branches and wind downed limbs is the most common trigger we see.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Las Vegas runs $3,500 to $9,000 on our pricing, and the range is driven by fence style, total linear feet, gate count, and whether the old fence and footings need hauled out. Ornamental aluminum and wrought iron sit at the top of that range; vinyl and chain link sit lower. We quote the panel and hardware costs separate from labor so you can see where the money goes. There’s no mystery markup folded into a single lump. Every scope change hits paper as a written change order before we touch a post, and the finished job carries our written 90-Day Done Right Promise, alongside our permanent 10% Senior & Veteran discount. We also offer a free second opinion on any written estimate you’ve already got.
DIY or Call Us?
You can safely check your own fence. Walk the line and push each post to feel for movement, measure your panel height and post spacing, and photograph any tag or stamp inside a post cap so you know which CGI run you have. What goes wrong with DIY is the digging and setting: in Las Vegas, a post set shallow or wet-set wrong will heel over within a season, and a fence with one bad post drags every panel after it. Removing a concrete footing, hauling panels, and cutting rail to match old post spacing is real labor. There’s no spring tension and no gas line here, but the footing work is where most homeowners stall out. Call us for a look before you rent a post digger; the estimate is free.
If your CGI run fails on a gate post or a footing, our crew members have up to 28 years of experience setting fences in desert ground. We pull permits where the job requires it and answer the phone with a live person around the clock.
FAQs
An ornamental aluminum CGI run typically holds up 20 years or more here, and wrought iron lasts similarly if seams stay painted. Our dry heat is kind to metal, but wind and soil settling wear out posts faster than the panels. Call (866) 814-4155 for an estimate on your specific run.
Often yes. A sagging gate can be fixed by re-setting or replacing the hinge post, and a single bent panel or a loose top rail is a small repair. If the posts along the whole run are loose, or the panels and rails have rusted or bent through, replacement usually costs less than chasing the repairs. Call us and we’ll tell you which one you have.
Most residential fence runs take one to three days for our crew, depending on linear feet, gate count, and how much old concrete has to come out of the ground. We give you a realistic finish date up front, not a guess on the phone. Call (866) 814-4155 to get your day scheduled.
We match your fence to the original CGI series and hardware spec from the post stamps and your measurements, then order to fit. Nothing is guessed from a photo, and we don’t carry parts on a truck, so we order what your fence actually calls for. When you’re pricing a window or kitchen job down the road, we also install KraftMaid, Cambria, and Silestone. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.