Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Las Vegas Owner’s Guide
We install CGI-compatible driveway and paver systems across Las Vegas, and a full paver driveway runs $7,000 – $18,000 installed, while concrete driveway installation lands at $4,500 – $12,000. Most homeowners find out something’s wrong the same way: a paver in the driveway shifts underfoot after a summer, sand starts washing out from the joints, or a hairline crack opens across a slab that was poured four or five seasons back. In Las Vegas, that failure almost always traces to heat cycling and caliche soil movement rather than traffic. We’re an independent contractor, not affiliated with CGI, and we’ll tell you plainly whether you’re looking at a repair or a replacement before anyone touches your driveway.
Which CGI Models This Applies To
CGI products turn up on Las Vegas driveways in a few common forms: interlocking concrete pavers (the 60mm and 80mm units most residential driveways use), permeable paver systems, and stamped or textured concrete overlays. The first thing to do is find the original installation spec. Check your closing documents, the contractor’s paperwork, or any leftover pallet in the garage. The pallet tag usually carries the product name, the thickness in millimeters, and a color or finish code. Thickness matters more than color: a driveway needs the heavier unit, and matching a 60mm paver to an 80mm bed creates a trip edge and a joint that fails early.
Measure a single paver before you order anything. Face dimensions vary by series, and a 1/4-inch mismatch at the edge of a driveway is visible from the street. On the OEM-versus-aftermarket question, CGI-brand replacement units match color, texture and dimension exactly, while a quality aftermarket paver can match the spec if the color run is close. For a spot repair, an aftermarket equivalent is often the sensible call. For a full driveway, we recommend sticking with a matched CGI series so the whole surface ages the same way. If your home also has KraftMaid, Cambria or Silestone finishes inside, those are separate trades, but the same rule applies: match the brand, match the spec, keep the paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
Las Vegas heat and our shrink-swell soils do specific things to a driveway. Here’s what to watch for:
- Pavers rocking or settling unevenly. Base compaction has given way or water is getting under the edge. A single rocking paver is a warning; a row of them means the base needs attention, not just a re-set.
- Joint sand washing out. Our summer monsoon bursts push sand out of the joints fast. Once the joints open up, water reaches the base and the failure accelerates.
- Hairline cracks widening across concrete. Thermal movement in a Las Vegas driveway is real, and a control joint that wasn’t cut deep enough will crack where it wants to, not where you wanted it to.
- Efflorescence or white chalky staining. Moisture migrating through the slab or paver is pulling salts to the surface. It’s cosmetic at first and a sign of a water problem underneath.
- Sunken edges along the garage apron or street. Typically base failure or a drainage problem pushing water against the slab. Left alone, it becomes a trip hazard and a bigger bill.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Las Vegas, a paver driveway installation runs $7,000 – $18,000, and concrete driveway installation runs $4,500 – $12,000. Driveway replacement on an existing surface lands at $5,000 – $14,000, while a paver patio installation is $3,500 – $11,000 if you’re tackling the backyard at the same time. Annual or as-needed driveway sealing is $250 – $700.
What drives the range: square footage, base depth and prep, tear-out and haul-away of the old surface, edging and drainage, and the paver series itself. The quote breaks out parts and labor separately, so you can see what the material costs and what the work costs. Every scope, every allowance, and every price change is a written change order before we start, and the finished driveway is backed by our written 90-Day Done Right Promise. If a number needs to move, it moves on paper first, not on the final invoice.
| Service | Installed Price Range (Las Vegas) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
DIY or Call Us?
Some things you can check safely yourself. Walk the driveway and mark rocking pavers with chalk. Look for joint sand loss after a rain. Snap a photo of any crack and measure its width over a couple of months to see if it’s growing. Clearing debris from the garage apron and keeping water flowing away from the slab is genuinely helpful.
What goes wrong with DIY is the base. Re-setting a paver without fixing compaction just kicks the problem down the road, and pouring or patching concrete over a bad subgrade is money thrown away. Tear-out, base prep and compaction are where a driveway lives or dies, and that’s the part we handle. Tom Barrett publishes his address and license number, so you can look it up before you sign anything. Call (866) 814-4155 and we’ll walk the driveway with you and give you a written estimate, free.
FAQs
A properly installed CGI paver driveway should give you 25 to 30 years in Las Vegas conditions, though our heat and sun exposure fade color and work the joints harder than in cooler climates, so expect to re-sand joints every few years and seal periodically. Concrete driveways in Las Vegas typically run 20 to 30 years with good base prep, and cracks show up sooner if the control joints weren’t cut right. Call (866) 814-4155 for an honest read on your specific driveway.
Often yes. Isolated rocking pavers, washed-out joints, and a single cracked slab section can usually be repaired without tearing out the whole driveway, and that’s almost always the first option worth pricing. Full replacement makes sense when the base has failed across a large area or the cracking has spread beyond a few sections. We’ll tell you which one you’re looking at, in writing.
A typical residential paver driveway in Las Vegas takes three to five working days from tear-out to final joint sand, weather permitting, and a concrete driveway usually takes five to seven days including cure time before you drive on it. We’ll give you the schedule in writing with the estimate. Call (866) 814-4155 to get on the schedule.
We source CGI-compatible pavers and materials through suppliers who carry the matching series, and we confirm the product tag, thickness and color code against your original installation before ordering. We don’t carry stock on a truck; materials are ordered to the job. Every material line shows up on the written estimate so you can verify the brand and the spec yourself. Call (866) 814-4155 for a free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.