Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Las Vegas Owner’s Guide
A CWS kitchen remodel in Las Vegas typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and how much plumbing or electrical has to move. We install CWS cabinet lines and the hardware and door fronts that go with them, and we handle the parts that fail first – hinges, drawer slides, soft-close dampers, and toe-kick panels. Most Las Vegas homeowners discover the problem the same way: a cabinet door that won’t stay shut, a drawer that sags when loaded, or a hinge that snaps after a few Las Vegas summers. The kitchen still works, but every morning it reminds you. That’s usually when the call comes in.
Which CWS Models This Applies To
CWS builds cabinet lines in a handful of door styles and box depths, and the part that fails is almost never universal. A soft-close hinge on a 2015-era shaker door won’t fit the hinge cup bore on a newer slab-front cabinet – the cup depth and screw pattern changed. Before you order anything, find the label inside the door or on the back panel of the base cabinet. It gives you the series and the door style. Measure the hinge cup bore (usually 35mm, but confirm) and the door overlay. Those two numbers decide whether a replacement part drops in or needs a new bore.
On the OEM-versus-aftermarket question: CWS-branded replacement hinges and slides are the safe match, and for a cabinet still under its original warranty, stay OEM. For older CWS cabinets out of warranty, quality aftermarket hardware (Blum, Grass, or Hettich equivalents) often outlasts the original at a lower price – but only if the bore and overlay match. We’re an independent service provider, not affiliated with CWS, so we buy the part that fits your cabinet, not the one with the logo. We also install KraftMaid, Cambria, and Silestone when a full kitchen remodel is the better call than a parts swap.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
- Doors that drift open or hang crooked. The hinge plate has stripped its screw holes in the cabinet frame, or the soft-close damper has lost tension. Las Vegas’s dry air shrinks the particleboard around the screws over time.
- Drawers that sag or scrape the frame. The slide’s ball bearing race is worn or the slide has pulled loose from the cabinet side. Undermount slides fail first on the heavy drawer – usually the one holding pots.
- A soft-close door that slams. The damper cylinder has failed. It’s a small part, but a slamming door stresses the hinge and the frame every time it closes.
- Cabinet boxes that separate at the corner. Heat cycling in a Las Vegas kitchen – especially against an exterior wall – loosens the joinery. This one is a structural sign, not a hardware sign.
- Countertop seams that open or caulk that pulls away. Laminate or solid-surface seams move with the cabinet box. If the box is failing, the counter follows.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work runs in Las Vegas, parts and labor together, quoted as a written line-item estimate before anything starts:
- Cabinet installation (full): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
What drives the range: cabinet count and box depth, whether plumbing or electrical has to move, countertop material (laminate versus quartz), and whether the old boxes are salvageable. A hardware-and-hinge refresh on sound boxes sits at the low end; new boxes, new counter, and a moved sink push toward the top. Every price change arrives as a written change order before the work happens – an allowance that isn’t on paper is a surprise waiting for a date. The completed work carries our written 90-Day Done Right Promise.
DIY or Call Us?
Some of this you can check yourself. Open a door, look at the hinge plate, and see whether the screws are biting or spinning. Pull a drawer and look at the slide for a bent track or a missing screw. Tighten a loose hinge screw with a screwdriver and see if it holds. That’s the safe part.
Where DIY goes wrong: re-boring a hinge cup on a finished door, or trying to re-anchor a stripped hinge plate into failing particleboard. Get the bore off by 2mm and the door hangs crooked forever. A cabinet box that’s separating at the corner isn’t a hardware fix at all – that’s a structural repair, and it’s where we tell homeowners to stop and call. We pull permits when the scope needs them and pass the inspection, because the permit inspector works for you, not for us. Call (866) 814-4155 and we’ll tell you straight whether it’s a $40 part or a new kitchen.
FAQs
Quality CWS cabinet boxes last 20 – 30 years; the hardware (hinges, slides, dampers) usually gives out first, around year 8 – 12. Las Vegas’s dry air and the heat cycling against exterior walls shorten hardware life compared to a humid climate. Call (866) 814-4155 for a free estimate on a hardware refresh.
Sometimes. A loose hinge screw can be re-anchored with a longer screw or a wood insert, and a slide can be reattached if the cabinet side is sound. But a stripped bore or a cracked box won’t hold a repair long. We’ll tell you which you have after a look.
A hinge and slide refresh on a standard kitchen takes one day; a full cabinet installation runs three to five days with countertop templating in between. We give you the timeline in writing before we start. Call (866) 814-4155 for a free estimate.
We match the part to your cabinet’s series, door style, bore size, and overlay – read off the label inside the door, not guessed. For in-warranty cabinets we source OEM; for out-of-warranty we quote quality aftermarket equivalents and let you choose. You get the part number in your written estimate before we order.
If a CWS cabinet door won’t shut, a drawer sags, or a box is separating in your Las Vegas kitchen, call (866) 814-4155 for a free estimate. You’ll get a written line-item quote, a straight answer on whether it’s a part swap or a remodel, and – if you’ve already got an estimate from someone else – a free second opinion on it. Ask about our $40 Off Any Repair Over $200 and our permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.