Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Las Vegas Owner’s Guide
Bathroom remodeling that works with the ECO Window Systems line of bath fixtures and enclosures runs $9,000 – $28,000 installed in Las Vegas, and we can usually schedule a walkthrough within the same week you call. This range covers a full gut of the average hall bath: shower or tub replacement, vanity, tile, glass enclosure, waterproofing, permits, and haul-away. Most owners find us after the shower door no longer latches, the enclosure seal is weeping into the drywall, or the vanity top has spider-cracked from the courtyard-to-master walk in July heat. That’s the moment the ECO Window Systems pieces stop being “the bathroom we installed” and start being the thing you need a real answer about.
We’re Barrett & Sons Construction Las Vegas, an independent service provider. We are not affiliated with ECO Window Systems. We work with the fixtures, not for the manufacturer.
Which ECO Window Systems Models This Applies To
ECO Window Systems products show up across a lot of Las Vegas bathrooms built or remodeled between the mid-2000s and today, and the label placement matters when you’re trying to match a replacement. Look for the manufacturer plate etched or stickered on the glass edge, the inner track of the door, or the frame header if it’s a framed shower door. On enclosures, the model number is almost always on the hinge plate. If you can’t find it, measure the rough opening at three points (top, middle, bottom) and the door panel thickness. ECO Window Systems bath doors are commonly 3/8-inch tempered glass on the heavier rollers and 1/4-inch on stock enclosures, and the two don’t interchange.
The OEM-versus-aftermarket call comes down to two questions: is the enclosure still under a manufacturer warranty, and do you need the exact frame profile back. If the frame is fine and only the glass or hinge failed, a direct-glass replacement is often the cleanest path. If the frame is aluminum that’s chalked white from our sun and the door no longer sits square, matching profile and hardware as a set is usually faster and cheaper than chasing a single discontinued part. We’ve seen ECO Window Systems enclosures from the 2008 – 2014 window sit with hardware that’s now off-catalog, and in those cases we rebuild the opening around a current spec rather than pretend a 12-year-old hinge will appear. We don’t stock parts and we don’t carry them on a truck. We source what matches your existing fixture or tell you honestly when the better move is a full replacement. For the rest of the bathroom, we also install KraftMaid, Cambria, and Silestone, and the same written-price rule applies.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
- Shower door drags or won’t latch. The rollers have worn or the track has bowed from years of mineral-heavy Las Vegas tap water and dry heat cycling. Once the glass loses alignment, the hinge pin starts wearing at an angle.
- Water staining or soft drywall beside the enclosure. The silicone sweep has failed and water is tracking under the bottom rail. In summer, the wall dries before the damage is visible, which is exactly why we probe it with a moisture meter.
- Vanity top or backsplash cracking. Not a fixture failure, a substrate one. If the ECO Window Systems vanity was set on a thin particle board base and the room hits 95°F with no exhaust fan, the deck flexes and quartz or stone veneer splits.
- Cloudy glass or etched spots you can’t scrub out. Hard water etching on tempered glass is permanent. This is a glass replacement, not a cleaning job.
- Mold at the caulk line that keeps coming back. The enclosure is trapping moisture because the pan is pitched wrong or the door sweep is gone. Redone caulk disappears for a month, then returns.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full bathroom remodel using the ECO Window Systems fixtures already in the room where salvageable, or compatible replacements where not, Las Vegas homeowners should expect $9,000 – $28,000. Line-item ranges for the pieces most owners ask about:
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement (glass and enclosure only): $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
- Small bathroom remodel: $5,000 – $12,000
What moves the number: whether we keep the existing pan and drain location, whether tile goes up the whole wall or to shower head height, and whether the permit requires moving plumbing. Every scope, allowance, and price change arrives as a written change order before work happens. The 90-Day Done Right Promise is on every completed job. Permits are pulled on every eligible bathroom job, and inspections are signed because that inspector works for you, not for us.
DIY or Call Us?
You can safely reset a shower door sweep, re-caulk a failing seam, and check the glass edge for a manufacturer label. That’s the honest limit. Everything past it is where we see homeowners get hurt or waste a weekend.
Replacing a 3/8-inch tempered glass shower door panel is a two-person job with a specific lift and set sequence. Dropping one shatters it into thousands of pieces and can slice a wrist. Rebuilding the pan or moving a drain means opening the waterproofing layer, and a bad membrane in a Las Vegas bathroom doesn’t fail quietly, it fails into the ceiling of the room below in about eight months. If the enclosure is loose, water is getting behind the wall, or the glass is cracked, stop there. Call (866) 814-4155 and we’ll look at it before you spend money guessing.
FAQs
Ten to fifteen years is realistic for the glass and frame, and the hardware usually goes first. Our dry heat and hard water combine to wear rollers, sweeps, and hinges faster than in wetter climates. Call (866) 814-4155 to schedule a free estimate on replacement.
Sometimes. A hinge, roller, or sweep swap on an otherwise-sound ECO Window Systems enclosure is worth pricing before you commit to a full replacement. Once the frame is chalked or the glass is etched, repair is money thrown at a fixture that’s already at the end of its run. We’ll tell you which case you’re in before we quote.
Enclosure-only replacement typically runs one to two working days; a full bathroom remodel runs two to four weeks depending on tile and permit inspection timing. The City of Las Vegas inspection window alone can add a few days, so plan for that. Call (866) 814-4155 for a written schedule with your estimate.
We identify the model from the label or measurements, then source either an OEM replacement or a spec-matched current equivalent, whichever gets you the better outcome. We don’t stock parts and we don’t carry them on a truck. If a match isn’t available, we say so and quote the alternative. We’re Barrett & Sons Construction Las Vegas, an independent provider, not affiliated with ECO Window Systems.
Every bathroom job we take on in Las Vegas starts with a free estimate, a written scope, and a live person who answers when you call. No voicemail box, no out-of-state call center. If you’re ready to get the failing piece out of your bathroom and a real number in your hand, call (866) 814-4155 to schedule your free estimate. Ask about our standing offers while you’re on the line: $40 Off Any Repair Over $200, Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and our permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.