Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Las Vegas Owner’s Guide
Kitchen remodeling for a home with Mr-Glass cabinetry and surfaces in Las Vegas typically runs $14,000 – $45,000 installed, and we don’t promise same-day on a planned remodel – nobody does one in a day, and anyone who says otherwise is quoting you a phone number, not a job. What you get from us is a real scope in writing, permits pulled, and materials you can look up by name before you spend a dime. Owners usually land on this page mid-project: a Mr-Glass cabinet door that won’t sit flush after a summer, a soft-close hinge giving up at the third drawer, a laminate edge lifting in the dry heat, or a finish that has chalked after a few Vegas summers. When a branded kitchen starts failing at the parts level, you don’t need a whole new kitchen. You need someone who knows which Mr-Glass hardware and surfaces it takes to fix it right, priced honestly.
Key Takeaways
- Branded kitchen remodeling in Las Vegas: $14,000 – $45,000 installed, cabinet installs $4,000 – $13,000, countertops $2,000 – $6,500.
- Most Mr-Glass failures are hardware and surface problems, not structure – which means options short of a full remodel.
- We’re an independent Las Vegas provider, not affiliated with Mr-Glass, and we source matching parts through cabinetry and hardware suppliers.
- Written scope, written allowances, written change orders, permits pulled, and a written 90-Day Done Right Promise on the work.
Which Mr-Glass Models This Applies To
Mr-Glass cabinetry and surfaced sets turn up in Las Vegas homes in a few recognizable shapes, and the part you need depends on which one you have. The way to identify yours isn’t the showroom name on the brochure – it’s the label inside the door frame or on the back of a drawer box, plus a tape measure. Write down the cabinet width and height, the door thickness (often at or near 3/4 inch), the hinge pattern (European cup hinges are standard on most Mr-Glass runs, with a 35mm door cup and a mounting plate on the cabinet side), and whether the slides are side-mount or undermount full-extension. Those four facts pick out the right hardware even when the series name is long gone.
The OEM-versus-aftermarket decision for Mr-Glass usually goes one of two ways. A genuine replacement door or a matched laminate section is worth chasing when the rest of the kitchen is still tight and you’re matching a finish or profile. For hinges, slides, and brackets, a quality aftermarket equivalent is often the smarter money – the standard hinge and slide dimensions are well understood across the industry, so a modern soft-close hinge that fits the same 35mm cup does the job and lasts longer than the original. We check the specification against your actual label and measurements before anything is ordered, so the part fits the first time instead of the second. If you also want to price a move to KraftMaid or Cambria down the road, that’s a separate conversation we’re happy to have.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
These are the symptoms Las Vegas owners describe most often when they call, each with what’s usually underneath it.
- Doors that drag or won’t close flush. Worn hinge cups or a loosened mounting plate let the door sag out of alignment. In a valley with summer highs well past 100°F and very low humidity, the wood and laminate expand and contract hard, and the screws holding the plate work loose faster than in a mild climate.
- Drawers that stick or roll out on their own. The slides have lost their tension or the tracks have picked up grit from years of desert dust. Undermount slides on a cheap set can fail at the catch first; full-extension slides that once glided start to hang.
- Soft-close that slams. The damper in the hinge or slide has worn out. This is a parts failure, not a cabinet failure, and the hinge or slide swaps.
- Lifted laminate edges or a chalking finish. Intense UV and 100-odd-degree afternoons are brutal on laminate edges and painted finishes. Sun-side cabinets in a Las Vegas kitchen age noticeably faster than shaded ones.
- Water swell around the sink or dishwasher. Even in a dry climate, a slow leak swells the cabinet bottom and loosens hardware. It’s the one failure that can spread, so it’s worth checking early rather than later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the money breaks down for kitchen work in Las Vegas. We quote parts and labor as one line-item price, so you can see what the part costs and what installing it costs – no mystery markup, no surprise invoice at the end.
- Kitchen remodel (full): $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: cabinet count and door style, whether the layout moves (moves mean permits and inspections), countertop material and edge, and how much of the old kitchen comes out first. Every eligible job gets permits pulled and inspections signed, and any change to scope or allowance arrives as a written change order before work begins. The 90-Day Done Right Promise is written on your contract – if something isn’t right, Tom comes back and makes it right on one call.
DIY or Call Us?
Some of this you can safely check yourself. You can tighten a loose hinge plate screw, measure a door to confirm the size, note the label inside the frame, and see whether a lift is surface laminate or wet cabinet board around the sink. Those are look-and-record jobs.
Where DIY goes wrong: re-hanging a full-height cabinet door or swapping a bank of hinges without checking alignment against the box tends to leave doors that drag worse than before, and chasing a water leak inside a cabinet base without finding the source just hides the swelling. Short of a surface-level check, the honest answer is that this is install work, and a badly hung door on a premium kitchen is a reminder every day. We’re an independent provider, not Mr-Glass, but we know the specs and we source the parts. Call (866) 814-4155 for a free estimate and we’ll figure out the right fix before it spreads.
FAQs
Cabinet boxes routinely last 15 to 25 years, but the hardware – hinges and slides – usually goes first, often in 6 to 12 years, and faster on sun-facing or sink-adjacent runs where Vegas heat and dry air are hardest on the moving parts. Replacing hardware early often saves the doors and boxes.
Often, yes. Hinge, slide, and laminate-edge failures are parts-level fixes that don’t require tearing out the kitchen. Repairs make sense while the boxes and layout are sound; a full remodel makes sense when cabinets are water-swollen or the layout no longer works. Call (866) 814-4155 and we’ll tell you honestly which side you’re on.
A hardware and parts swap typically takes a day or a few; a full kitchen remodel in Las Vegas generally runs several weeks depending on cabinet lead times, countertop fabrication, and inspections. We build the schedule in writing so you know the date and the order of work before it starts.
We identify your cabinet from the door-frame label and measurements, then match the hinge cup size, slide type, and finish through cabinetry and hardware suppliers, checking the specification against your actual label before ordering. What we don’t do is claim to stock Mr-Glass parts on a truck – parts get ordered to the job, correctly, the first time.
Whether you’re replacing a handful of hinges or planning a full kitchen remodel, call Barrett & Sons Construction Las Vegas at (866) 814-4155 for a free estimate. We’ll put the scope in writing, pull the permits, and stand behind the work with the 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.