Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Las Vegas Owner’s Guide
We install Unilock kitchen remodeling systems in Las Vegas homes, and most full kitchen projects run $14,000 – $45,000 installed, with the Unilock-specific components – modular cabinet systems, integrated countertop and backsplash assemblies, and the connectors and hardware that hold them together – priced as line items inside that range. Replacement of a single failed component is far less. Homeowners usually call us after they notice a cabinet run that no longer sits flush, a countertop seam that has opened up, or a door that drags in one corner no matter how many times they adjust the hinge. That drag or gap is almost always the part underneath, not the door itself.
Key Takeaways
- Las Vegas kitchens take a beating from dry air and wild temperature swings between summer afternoons and air-conditioned nights. Unilock components that would last 20 years in a milder climate often show wear at 10 to 12 here.
- The part that fails first is usually a connector, leveling foot, or integrated rail, not the visible panel.
- We pull permits and sign inspections on every eligible job, and every price change comes as a written change order before we touch the kitchen.
- We’re an independent contractor. We’re not affiliated with Unilock. We install and repair their kitchen systems, and we’ll tell you plainly when a genuine Unilock part makes sense and when a quality equivalent does.
Which Unilock Models This Applies To
Unilock has changed its kitchen line over the years, and the part you need depends on which series your cabinets came from. The older modular runs (often sold through regional dealers in the late 2000s and 2010s) use a different connector profile than the newer integrated systems, and the two are not interchangeable. Before you order anything, look for the model or series label. On Unilock kitchen cabinetry it’s usually on the inside face of the cabinet box, on the upper corner near the hinge plate, or on the back panel. If it’s gone, measure the cabinet box depth and the connector spacing and write both numbers down. A photo of the connector itself, taken straight on with a ruler in frame, will settle the question faster than any description.
Whether to go OEM or aftermarket is a real decision. A genuine Unilock replacement connector matches the original exactly and keeps your warranty path clean. A quality aftermarket equivalent – and there are good ones – costs less and often fits fine, but the tolerances are looser. In a Las Vegas kitchen where the cabinet run gets direct afternoon sun through west-facing windows, looser tolerances can mean a joint that works itself open again within a season. We stock neither. We source the part after we’ve identified the series, and we tell you which route we recommend and why before ordering. We also handle KraftMaid, Cambria, and Silestone kitchens, so if your Unilock system was mixed with any of those brands, we can work across all of it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- A cabinet door that drags or won’t stay aligned. The hinge is usually innocent. The real cause is a failed leveling foot or a sagging connector that lets the whole box tilt a few degrees.
- A countertop seam that has opened or gone uneven. In Las Vegas, the dry air pulls moisture out of wood substrates fast, and the seam opens before the stone itself ever cracks.
- Soft or spongy spots under the cabinet base. A slow leak from a sink supply line, common in kitchens past 15 years old, will rot the cabinet floor long before you see water on the tile.
- Drawers that stick in summer and glide fine in winter. That’s thermal expansion in the cabinet box and rails, and in Las Vegas it’s a reliable early sign the rail hardware is at the end of its life.
- A gap between the countertop and the backsplash. Caulk shrinks in our low humidity. A widening gap is usually a caulk failure, not a structural one, but it’s worth a check because it lets water behind the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full kitchen remodel in Las Vegas runs $14,000 – $45,000. That covers cabinet installation at $4,000 – $13,000, countertop installation at $2,000 – $6,500, backsplash installation at $800 – $2,500, and island installation if you’re adding one at $3,000 – $10,000. A smaller kitchen remodel is $9,000 – $20,000. Replacing one failed Unilock connector or leveling component is a parts-and-labor line item inside the smaller end of those ranges, and we quote it that way – the part at cost, the labor itemized, nothing bundled.
What drives the range is cabinet count, whether the layout changes, and whether the countertop is a Unilock-integrated piece or a separate Cambria or Silestone slab. Every allowance is written down before work starts. Every price change arrives as a written change order before we proceed. The work is backed by our 90-Day Done Right Promise, in writing on the contract, and if something isn’t right, one call brings us back. Permits are pulled and inspections signed on every eligible job.
DIY or Call Us?
You can safely check the basics. Look for the series label, photograph the connector, test whether a cabinet box is level with a spirit level on the face frame, and check for soft wood under the sink. Those cost nothing and save us a trip.
What we’d steer you away from is replacing a connector or re-hanging a full cabinet run yourself. Unilock integrated systems are engineered as a unit. Loosen one connector under load and the cabinets above it can shift, and a falling upper cabinet is a serious injury waiting to happen. We’ve walked into Las Vegas kitchens where a homeowner tried it and found a cabinet box held by two screws and hope. That’s the part where you call us. Our crew members have up to 28 years of experience, and they’ve seen this exact repair hundreds of times. Call (866) 814-4155 for a free estimate, and a live person will answer.
FAQs
Expect 10 to 12 years on the connectors and leveling hardware in a Las Vegas kitchen, even though the cabinet panels themselves will hold up far longer. Our dry air and big day-to-night temperature swings work on the joints first. When the hardware goes, the panels aren’t far behind if you ignore it.
Sometimes, yes. A hinge or leveling foot can often be adjusted or swapped without touching the cabinet box. A failed connector under load usually can’t be repaired in place and needs replacement. We’ll tell you which one you’re dealing with before we quote it. Call (866) 814-4155 for a free estimate on either path.
Most single-component replacements in a Las Vegas kitchen are a half-day to a full day, once the right part is in hand. Sourcing the correct Unilock series part is what takes the time, not the install. We don’t stock parts, so we order after we’ve identified the series and confirmed the fit.
We identify your series from the label or by measurement, then order the correct part through our supplier network, OEM or a quality equivalent based on what you choose. We tell you the lead time and the cost before ordering. Call (866) 814-4155 to start the identification, and estimates are free.
If your Unilock kitchen has a part that’s failed or a remodel that’s stalled, call Barrett & Sons Construction Las Vegas at (866) 814-4155 for a free estimate. We’re owner-operated, we pull permits and sign inspections on every eligible job, and every price change comes to you in writing before work starts. We’re not affiliated with Unilock, but we know their kitchen systems and we’ll tell you the honest path. Ask about our $40 Off Any Repair Over $200, our Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.