A Barrett company - serving Las Vegas, NV

Unilock Windows & Doors in Las Vegas, NV

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Windows & Doors: The Las Vegas Owner’s Guide

We install and service Unilock-compatible windows and doors across Las Vegas, and most single unit swaps land between $450 and $2,400 installed depending on whether you’re replacing a sash, a sealed glass unit, a hinge set, or a full door slab. Multi-unit replacements in a Las Vegas home typically run $4,500 – $15,000 for windows or $8,000 – $25,000 for impact-rated units. We schedule these as planned appointments, not same-day walk-ins, because every order has to be measured against the actual opening before anything is ordered.

Call (866) 814-4155

Owners usually find the problem in one of two ways. Either the window won’t latch going into summer, or the door drags on the threshold and the deadbolt stops lining up. In Las Vegas, both tend to show up in June when the house hits 105 degrees and everything expands and warps a little differently than it did in March. That’s the pattern we see most, and it’s why we ask when the symptom started before we quote a part.

Which Unilock Models This Applies To

Unilock builds windows and doors in several distinct series, and the parts aren’t interchangeable across them. The single most useful thing you can do before calling anyone is find the manufacturer label. It’s usually on the top or side of the sash frame, inside the jamb, or stamped on the glass spacer bar. From that label we can pull the series, the glass package, and the dated production run. That last detail matters more than most owners realize: Unilock has revised hinge geometry and weatherstripping profiles across runs, so a hinge set from one production year will not fit a door from a different year even in the same model line. We’ve seen this trip up homeowners who ordered a part online and found it was half a millimeter off.

If the label is gone, we measure the opening, the sash dimensions, and the glass thickness, and identify the series from those. That’s a real measurement job, not a guess from a photo texted to us. On the OEM versus aftermarket question: for Unilock glass units and hardware, the OEM part is usually the right call because the sizing is proprietary. For rollers, weatherstripping, and standard latches, a quality aftermarket equivalent from a known manufacturer will fit and cost meaningfully less. We’ll tell you which side of that line your part falls on before you commit. We also work with KraftMaid, Cambria, and Silestone on other parts of the house, but on windows and doors we stay in our lane.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Windows & Doors Is Failing

Here’s what we actually see in Las Vegas homes, and what’s usually behind it.

  • Fogging or condensation between the panes. That’s a failed seal in the insulated glass unit, not a cleaning problem. Once the seal is gone, the desiccant is spent and the unit has to be replaced. It won’t clear on its own.
  • Door drags on the threshold or sticks at the top corner. Usually worn hinge bushings or a settlement-related frame shift. Both are fixable, but the fix depends on which one you have, and guessing wrong wastes money.
  • Deadbolt no longer lines up with the strike plate. The door has shifted in the frame. Could be a hinge problem, could be the frame itself has moved. This is worth an in-person look before you buy hardware.
  • Draft coming through the perimeter of a closed window. Weatherstripping has compressed or the sash isn’t sealing against the frame anymore. In Las Vegas this shows up as higher cooling bills before it shows up as a comfort issue.
  • Glass cracking near a corner or edge. Often thermal stress from the extreme swing between afternoon sun and overnight cool. On impact-rated units this can also indicate a compromised laminate layer.

One thing that surprises owners: Las Vegas’s dry air and UV load age weatherstripping faster than wetter climates do. Rubber that stays pliable in Seattle will go brittle here in a fraction of the time. We see more weatherstripping failures than glass failures on Las Vegas doors, which is the opposite of what people expect.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here are the installed price ranges we quote in Las Vegas, and what each one covers.

What’s being replaced Installed range
Single sash or sealed glass unit $450 – $1,200
Hinge set or door hardware $350 – $900
Full door slab replacement $1,200 – $2,400
Window replacement (whole home) $4,500 – $15,000
Impact window installation $8,000 – $25,000

What drives the range: glass package type, series, number of units, whether the frame is being replaced or just the operating parts, and whether we find hidden frame damage once the old unit comes out. We don’t quote a phone number and then hand you a different bill. Every scope change arrives as a written change order before any work happens, and you sign off on it. Work is backed by our written 90-Day Done Right Promise, and every eligible job has permits pulled and inspections signed.

DIY or Call Us?

There’s an honest split here. You can safely check your own label, measure the opening, clean the tracks, and confirm whether the door drags consistently or intermittently. Write down what you find. That information is worth real money when you call anyone. What we don’t recommend is glass unit replacement, hinge re-alignment on a heavy door, or anything that involves the door coming off its frame. A full glass door slab is heavy and unforgiving if it slips. The other risk is thermal: the insulated glass on an impact-rated unit is expensive to break, and installing a unit that’s half a millimeter off will crack the glass when it heats up in July. One wrong measurement costs more than the labor you saved. If you’re not sure, call (866) 814-4155 and we’ll walk you through what to check.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch