Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Las Vegas Owner’s Guide
Unilock fence installation in Las Vegas typically runs $3,500 to $9,000 installed, and yes, we can usually get out to look at a failing wall or fence within a day or two of your call. That range covers the common residential runs: a low garden wall, a pillar-and-panel privacy fence, or a short seat wall along a patio. Most owners don’t notice a problem until a cap stone shifts underfoot or a panel rocks when the dog leans on it. By then the base course has usually been working loose for a season or two. Barrett & Sons Construction installs and repairs Unilock systems across the valley. We’re an independent contractor, not affiliated with Unilock, and we’ll tell you straight what your system needs.
Which Unilock Models This Applies To
Unilock’s fence and wall systems aren’t one product. The retaining and freestanding lines most Las Vegas homeowners have are the Brussels Dimensional Stone wall blocks, U-Cara modular panels, and the Pisa2 and Olde Quarry lines, sometimes topped with Ledgestone caps. Each has its own block depth and cap profile, and they don’t swap. A Pisa2 cap won’t seat on a U-Cara panel, and the wrong cap is the single most common mismatch we see.
Here’s how to identify yours before you call. Look at the unit size on a cap or a face block (a tape measure across the face is enough), note whether the wall is dry-stacked or has visible mortar, and check for a stamped mark on the underside of a cap if you can safely lift one. U-Cara panels have a distinctive flat face and a channel behind them. If you’re not sure, a photo of the cap edge and one of the full run tells us most of what we need.
On the OEM-versus-aftermarket question: Unilock caps and blocks are worth matching to the original line because color lots shift between production runs. A close aftermarket cap in the same nominal size often won’t match the existing color, and in direct Las Vegas sun that mismatch gets more obvious, not less. When the exact line is discontinued, we tell you up front and show you the closest current match in person before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
- Caps that rock or lift at a corner. The cap adhesive has let go, usually after a summer of expansion and contraction. Once one cap lifts, water gets behind it and the next one goes.
- Panels that sway when you push them. The base course has settled or the panel anchors have loosened. In our soil, this often traces back to a base that wasn’t compacted deep enough at install.
- Stepped or separated joints between blocks. Freeze isn’t the issue here, heat is. Repeated 100-degree days move a wall that wasn’t built with the right base and drainage behind it.
- Efflorescence, the chalky white bloom on the face. It’s salts drawn out by moisture. Sometimes it’s cosmetic, but when it keeps coming back after a rain, water is getting in where it shouldn’t.
- Leaning pillars or a wall that’s drifted out of plumb. This is the one to take seriously. A leaning pillar on a privacy run is a structural sign, and it’s worth having someone look before the next monsoon-season gust.
A wall that’s only cosmetic-failing and a wall that’s moving are two different repairs, and the price reflects that. We’ll tell you which one you have.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Las Vegas, a Unilock fence or wall repair or replacement generally lands in the $3,500 to $9,000 installed range. What moves you up or down:
- Linear footage and height. A short seat wall is a different job than a full privacy run with pillars.
- Whether the base is sound. Reusing a good base saves real money. Rebuilding a failed one is the biggest cost driver.
- Cap and color matching. A current line in stock color is straightforward. A discontinued line means sourcing or an honest conversation about a close match.
- Access and demo. Hauling out old block from a tight side yard adds labor.
You get a written line-item quote before we start: block, cap, base prep, demo, and labor, each on its own line. Any change to scope arrives as a written change order before the work happens, so there’s no surprise invoice at the end. Every eligible job gets permits pulled and inspections signed, and the work is backed by our written 90-Day Done Right Promise. If something’s not right, one call brings us back.
DIY or Call Us?
Some of this you can check yourself, safely. Walk the run and push on panels, look for rocking caps, note any pillar out of plumb, and take photos. Don’t lift heavy caps overhead or pry at a leaning pillar to see what’s underneath. A wall that’s already moving can come down on you, and that’s a real risk, not a scare tactic.
Where DIY goes wrong on Unilock systems is the base and the cap. Homeowners reseat a cap with the wrong adhesive and it lifts again by August. Or they patch a settled base course without fixing the drainage behind it, and the same panel sways by the next hot spell. Our crew members have up to 28 years of experience with block and panel systems, and we’ll tell you honestly whether your wall needs a repair or a rebuild. Call (866) 814-4155 for a free estimate, and we’ll bring a straight answer with us.
FAQs
A properly built Unilock wall should last 25 years or more here, and the block itself often outlasts the base and cap work around it. The desert heat is hard on adhesives and cap joints, so those are usually what need attention first, not the block. Call (866) 814-4155 for a free estimate on yours.
Often, yes. If the base is sound and the failure is caps, joints, or a single panel, a targeted repair is usually the right call and costs far less than a rebuild. If pillars are leaning or the base has settled, replacement is the honest answer. Call (866) 814-4155 and we’ll tell you which one you’re looking at.
A cap and joint repair is often a day’s work. A full panel or pillar replacement on a privacy run usually takes two to four days depending on length and access. We give you a realistic schedule in the written quote before anything starts. Call (866) 814-4155 to get that quote scheduled.
We identify your exact line and color, then order through authorized Unilock suppliers, and we confirm availability and lead time before you commit. If the line is discontinued, we show you the closest current match in person first. Call (866) 814-4155 for a free estimate and we’ll start with identifying your system.
Ready to get your Unilock fence or wall sorted? Call Barrett & Sons Construction Las Vegas at (866) 814-4155 for a free estimate. We also install and repair KraftMaid, Cambria, and Silestone systems across the trades we handle, and we’re proud to serve Las Vegas and the neighborhoods around it. Scope in writing, allowances in writing, change orders in writing, every time.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.