Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Bathroom Remodeling: The Las Vegas Owner’s Guide
A Mighty Buildings bathroom remodel in Las Vegas typically runs $9,000 to $28,000 installed, depending on whether you’re reworking a small panel-built bath or gutting and rebuilding a full primary suite. Small bathroom remodels usually land between $5,000 and $12,000. We’re an independent contractor and not affiliated with Mighty Buildings, but we’ve worked on enough of their panelized and 3D-printed homes around the valley to know the wall systems, wet-wall chases, and fixture rough-ins.
Owners usually don’t call us because they want a remodel. They call because something failed. A shower pan that’s been weeping under the tile. Grout lines opening up every summer. A vanity that’s pulled away from the wall at the anchor points. Sometimes it’s a slow leak in a panelized wall chase that finally shows up as a soft spot in the drywall. That’s usually the moment a “someday” bathroom remodel becomes a this-month project.
Which Mighty Buildings Models This Applies To
Mighty Buildings has built panelized and 3D-printed single-family and ADU units across a few production eras, and the bathroom assemblies aren’t identical between them. Earlier California-built panels used a different framing module than the later Las Vegas-area installs, which means the wall cavity depth behind a vanity or shower valve isn’t always the same. Before we quote anything, we pull the model designation off the panel label inside the unit (usually near the utility chase or inside a closet), measure the wet-wall thickness, and confirm the rough-in spacing.
The other compatibility gotcha is the shower pan and drain assembly. Some Mighty Buildings layouts set the drain slightly off the standard centerline, and a standard big-box pan won’t line up without modification. We measure center-to-center and account for that before ordering. As for OEM versus aftermarket: for structural or panelized components, OEM-spec matters and we specify it. For finish items like tile, vanities, shower trims, and lighting, we use trusted premium lines like KraftMaid, Cambria, and Silestone, along with quality standard fixtures, because they hold up better in Las Vegas’s hard water and dry heat than the mystery-brand components that show up in some modular builds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Bathroom Remodeling Is Failing
- Tile or grout cracking along the shower walls. Las Vegas summers push daily temperature swings through exterior walls, and panel joints flex more than a stick-built wall would. When the grout opens, water gets behind the tile, not just onto it.
- A spongy or discolored shower pan. That’s typically a failed pan liner or a drain seal that’s been leaking for a while. The soft spot is the symptom; the leak is the problem.
- Caulk and grout lines that won’t stay sealed. If you’ve re-caulked the same corner three times, the movement behind it is bigger than caulk can absorb, and that points to a substrate issue.
- Vanity pulling away from the wall or doors that won’t close. Panelized wall anchor points can loosen over time, and the vanity starts to sag or tip forward slightly.
- A musty smell that won’t go away even with the exhaust fan running. That’s usually moisture trapped in a wall cavity, and it needs to be found, not masked.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodels in Las Vegas run $9,000 to $28,000. Small bathroom remodels come in at $5,000 to $12,000. A tub-to-shower conversion is typically $3,500 to $10,000, walk-in shower installation is $4,500 to $12,000, and a shower replacement alone is $3,000 to $8,500. A vanity swap is $800 to $3,000. These are quality aftermarket fixtures and finish lines, not stripped-down contractor-grade components.
What moves the number: how much of the wet wall has to be opened up, whether the drain needs to be relocated, tile choice, vanity and fixture grade, and whether the panelized wall assembly needs reinforcement behind the new shower or vanity. Every scope, allowance, and price change gets written down before work starts. A change order in writing means no surprise invoice at the end. Every completed job is backed by our 90-Day Done Right Promise, written on the contract, not buried in fine print.
| Item | Typical Las Vegas Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
DIY or Call Us?
You can safely check for moisture with a cheap pin meter, take photos of the panel labels, and measure the wet-wall thickness and drain spacing yourself before you call anyone. That info helps a quote. What you shouldn’t do is tear into the shower pan, the paneled wall assembly, or the drain rough-in on your own. The failure you can see is usually sitting in front of a failure you can’t see. A leaking pan or a loosened panel anchor is a structural and moisture problem, not a caulk problem, and opening it up wrong can turn a $4,500 repair into a $12,000 rebuild.
We pull permits and get inspections signed on every eligible job. The permit inspector works for you, not for us, and that’s the point. If you’ve already had a national outfit quote you one number on the phone and hand you a bigger bill at the door, get a written estimate from us and compare it line by line. Call (866) 814-4155.
FAQs
A properly installed tile shower and pan should hold up 20 to 30 years. In Las Vegas, the dry air and big temperature swings push panel joints harder than they’d be stressed in a milder climate, so grout and caulk maintenance matters more here than most places. If you’re noticing soft spots or repeated failures in a unit under 10 years old, it’s worth finding the root cause rather than patching it again. Call (866) 814-4155 for a free estimate.
Sometimes, yes. A vanity that’s pulled loose can often be re-anchored, and a single cracked tile can be replaced. But a leaking shower pan, a failed drain seal, or moisture in a panelized wall usually can’t be repaired from the surface, and patching over it just delays the real fix. We’ll tell you honestly which side of that line you’re on before any work starts. Call (866) 814-4155 for a free estimate.
A shower replacement or tub-to-shower conversion usually runs several days to about a week. A full bathroom remodel generally takes a few weeks, depending on tile, fixture lead times, and how much of the wet wall has to be opened. We give you the schedule in writing before we start. Call (866) 814-4155 for a free estimate.
We confirm the model designation from the panel label, measure the actual wall and drain dimensions, then order OEM-spec components where the panel assembly requires it and premium finish lines where they don’t. We don’t guess at compatibility, and we don’t substitute a standard part and hope it fits. Call (866) 814-4155 for a free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.