A Barrett company - serving Las Vegas, NV

Ameristar Kitchen Remodeling in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Kitchen Remodeling: The Las Vegas Owner’s Guide

Ameristar kitchen remodeling in Las Vegas typically runs $14,000 – $45,000 installed, and smaller kitchens land closer to $9,000 – $20,000. We’re an independent contractor, not affiliated with Ameristar, and we work with their cabinet and component lines the way we work with KraftMaid, Cambria, and Silestone: measured, quoted in writing, and installed to spec. Ameristar owners usually call us the day a cabinet door won’t stay closed, a drawer box cracks at the corner joint, or a hinge plate pulls loose from the frame and takes a chunk of particleboard with it. Those are the first signs, and in Las Vegas heat they show up sooner than the manufacturer expected.

Call (866) 814-4155

Which Ameristar Models This Applies To

Ameristar builds a wide catalog, so the cabinet line matters more than most homeowners realize. Their in-stock and semi-custom cabinet programs use specific drawer-box systems (common choices are side-mount epoxy slides and, on upgraded lines, full-extension undermount slides) and hinge patterns that don’t interchange across series. A door from one series won’t hang correctly on another series’ frame no matter how close the dimensions look.

Here’s how to identify what you’re actually working with before you order anything:

  • Open a cabinet door and look at the inside edge of the frame for the manufacturer label or series sticker. Most Ameristar lines put it there, not on the door back.
  • Measure the drawer box: width, depth, and the height of the box side. A half-inch difference means the slide won’t line up with the old screw holes.
  • Check the slide type by pulling the drawer out. A slide that lets the drawer come fully clear of the cabinet is full-extension; one that stops halfway is a side-mount or three-quarter extension slide.
  • Photograph the hinge, then measure the door overlay (how far the door covers the frame edge). Ameristar lines run different overlays, and the wrong hinge throws the door out of alignment.

On the OEM question: genuine Ameristar replacement doors and drawer fronts are the surest fit if the cabinet line is still in production, but lead times can run weeks. Quality aftermarket door fronts in matching or near-matching finish are a reasonable path for a partial update, and we’ll tell you honestly when a match will look close but not invisible. We don’t stock parts and we don’t claim to. We source what your specific kitchen needs and show you the spec before it’s ordered.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Kitchen Remodeling Is Failing

In Las Vegas, cabinet failures tend to show up in the same order: hardware first, wood second, finish last. Here’s what we see on calls around the valley.

  • Doors that sag or rub the frame. The hinge screws have stripped out of the particleboard, usually because the hinge was anchored in the wrong spot from the start. Repositioning it without filling the old holes properly just repeats the problem in six months.
  • Drawer boxes cracking at the corner. Under-mounted slides that are slightly out of level put constant torque on the box joint. Heat and low indoor humidity in Las Vegas dry the wood, and the joint pops. This is common on west-facing walls where cabinets take afternoon sun.
  • Slides that grind or stick halfway. Grit in the track from desert dust, or a ball bearing race that has dried out. If the slide is a side-mount instead of full-extension, the drawer has been fighting the cabinet itself every time it moved.
  • Finish lifting at the door edges. Ameristar thermofoil and laminate finishes don’t fail for no reason. Steam from a dishwasher vent or a poorly sealed sink cutout gets behind the edge and lifts it. Once it lifts, it won’t sit back down.
  • Frames racking out of square. The cabinet face no longer lines up at the doors. On a wall that gets direct sun, cabinet frames move more than people expect, and once the frame is out of square, doors and slides both misalign.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed Ameristar kitchen remodeling in Las Vegas runs $14,000 – $45,000 depending on scope. Here’s how that breaks out so you can see what you’re paying for:

Scope Installed Range
Small kitchen remodel $9,000 – $20,000
Full kitchen remodel $14,000 – $45,000
Cabinet installation (doors, boxes, slides) $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: how many cabinets need replacing versus repairing, whether we’re matching a discontinued Ameristar finish, and whether the countertop or backsplash comes out during the work. Every allowance and every price change gets written down before we move, because an allowance that isn’t on paper is a surprise waiting for a date. Permits get pulled on every eligible job and the inspections get signed. Every completed job carries our written 90-Day Done Right Promise.

DIY or Call Us?

There’s a real split here, and nobody should guess. What you can safely do yourself: measure the drawer box, photograph the hinge and identify the overlay, check the cabinet frame for level with a torpedo level, and look up the Ameristar chassis label. None of that risks anything.

Where DIY goes sideways: trying to re-hinge a door into stripped-out particleboard without a proper hole-filling and re-anchoring plan, forcing a side-mount slide into a cabinet drilled for a different system, or ordering a replacement door by measurement alone without matching the overlay and hinge pattern. We see a lot of those fronts after someone has already tried once, and the correction costs more than the original job would have.

If the cabinet frame is racked, a sink leak is involved, or the door finish has lifted along an edge, that’s where you want a trained crew. Call (866) 814-4155 and describe it. We’ll tell you honestly whether it’s a repair or a replacement before anyone shows up.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch