Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Las Vegas Homeowners Choose Ameristar Construction
We provide independent Ameristar construction service in Las Vegas, NV – cabinet installation and refacing, countertop work, and small kitchen remodels built around Ameristar cabinetry. We’re not affiliated with or authorized by Ameristar; we’re an independent service provider whose crew members have worked with these boxes on real jobs across the valley for years. What makes our Ameristar work different is that we tell you honestly when a set of Ameristar boxes can be saved and when they can’t. Call (866) 814-4155 and a live person picks up.
Ameristar fills a real slot in the market: value-tier cabinetry sold through big-box and dealer channels, priced so a kitchen can actually get done. The catch is that most Las Vegas homeowners who buy it get a spec sheet and little else. Nobody explains what happens to a thermofoil door after five Las Vegas summers, or why the box under the sink is soft. We do, because we’re in these kitchens every week.
Why Trust Barrett & Sons Construction Las Vegas for Your Ameristar Construction?
Ameristar isn’t a brand you learn from a brochure. You learn it by pulling a swollen particleboard box out from under a sink in a Paradise Palms ranch house, or by finding a thermofoil door that’s been peeling at the top edge since the second summer it hung near a range. Our crew members have up to 28 years of experience, and a good share of that has been spent inside value-tier cabinet lines exactly like Ameristar – the Painted Shaker, the Raised Panel Oak and Maple, the Thermofoil Flat-Slab, the Framed Standard Overlay Series.
That familiarity matters for parts. Ameristar OEM doors and hardware are frequently unavailable or special-order, which means a repair often relies on color-matched aftermarket fronts and quality glides rather than a factory box. We source per job, we don’t claim local stock, and we tell you up front what’s coming from where and roughly how long it takes.
Warranty-safe practice is the other half. We don’t drill or cut in ways that walk a manufacturer claim into a corner, and when a failure looks like it could fall under Ameristar’s coverage, we’ll say so before we touch anything. Every eligible job gets permits pulled and inspections signed, every scope change arrives as a written change order before work proceeds, and every completed job is backed by our written 90-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Fix in Las Vegas
Ameristar failures are rarely one defective part. They’re moisture, heat, and time working on a value-tier substrate. Here’s what we actually find:
- Thermofoil door delamination on the upper cabinets near the range. The Thermofoil Flat-Slab and Painted Shaker lines use a heat-applied vinyl wrap on the door face, and that wrap lets go at the edges first. In a Las Vegas kitchen the range side sees concentrated heat every single evening, and the sun coming through an east-facing window does the rest. Once the edge lifts, grease and steam get behind the film and it peels in sheets.
- Painted MDF door swelling and blistering near the sink and dishwasher. MDF takes on moisture at the cut edges and seams, and a dishwasher that vents steam into the cabinet run puts that moisture exactly where the door is weakest. The paint blisters, the face swells proud of the frame, and the door stops closing flush.
- Particleboard box swelling and joint separation around plumbing penetrations. A slow drip under the sink doesn’t announce itself. It wicks into the particleboard around the supply lines and the disposal opening, the panel swells, and the joint separates. By the time you see a sag, the box has usually been soft for a year.
- Drawer glide and hinge loosening in the lower-grade substrate. Ameristar’s Framed Standard Overlay Series hangs its doors and drawers on standard hardware, and after a decade of daily use the screw holes in particleboard wallow out. A hinge that won’t hold its adjustment is usually a substrate problem, not a hinge problem, and it tells you something about the box behind it.
- Sun-driven color fade and joint stress on west and south-facing runs. Las Vegas gets negligible rainfall and relentless UV, so the damage here leans toward expansion and contraction rather than water. A cabinet run in direct afternoon sun cycles hard between day and night, and the seams between boxes open up over the years. If you’re remodeling anyway, a shade or a valance earns its keep.
Ameristar Parts & Our Repair-vs-Replace Approach
For Ameristar, genuine OEM doors and hardware are often special-order or simply not available through retail channels anymore. That shapes the whole conversation. On a small repair – one peeling door, two loose glides, a hinge that won’t hold – a qualified pro typically uses color-matched quality aftermarket fronts and standard glides, and the result looks right and works right for years.
Where we push back is when the failures stack up. Three or four swollen boxes, doors peeling on two separate runs, joint separation near the plumbing: patching value-tier particleboard tends to cascade. Fix the door and the box behind it goes next season. At that point we’ll tell you straight that a partial cabinet replacement paired with new countertops and backsplash is the more honest use of your money, even though it’s the bigger invoice. We’d rather lose the small repair and keep your trust.
Call (866) 814-4155 and we’ll give you a free second opinion on any written estimate you’ve already got.
Our Ameristar Service Process – Step by Step
- 1
Diagnosis. We open every door and drawer, check the boxes for swelling at the plumbing penetrations, and look at the thermofoil edges and MDF seams under direct light. We note which failures are heat-driven and which are moisture-driven, because that decides the fix.
- 2
Written scope. You get a line-item estimate with allowances spelled out. An allowance that isn’t on paper is a surprise waiting for a date, so we put it in writing before anything gets ordered.
- 3
Repair or install. Matched aftermarket doors and glides on a small repair, or a partial replacement with new fronts, countertops, and backsplash. Countertop templates get cut only after the boxes are set and shimmed, which is the step that keeps a quartz seam tight.
- 4
Test and adjust. Every door swings, every drawer tracks, every hinge holds. We run water at the sink and check the disposal opening for weeping before we call it done.
- 5
Warranty. The 90-Day Done Right Promise is written on the contract. If something isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterAmeristar Products We Service & Install in Las Vegas
We work with the Ameristar lines you’re most likely to find in a Las Vegas kitchen: the Painted Shaker in its painted and thermofoil versions, the Raised Panel Oak and Maple, the Thermofoil Flat-Slab Door, and the Framed Standard Overlay Series. On top of the boxes themselves we handle cabinet installation and refacing, quartz and granite countertops, backsplash work, bathroom vanity installation, and small kitchen remodels. If your cabinets are slab-front, framed, painted, or wrapped, we’ve seen the failure pattern before. Las Vegas homes vary a lot – a 1960s Huntridge kitchen and a 2005 Summerlin tract build fail in different ways, and we scope each one on its own.
We Also Service These Brands
Ameristar is one line among many, and a kitchen usually touches more than one brand. We also work with KraftMaid and Kohler cabinetry and fixtures, and we fabricate and install Cambria and Silestone quartz surfaces. If your remodel mixes an Ameristar box with a Cambria top and a Kohler sink, that’s a normal scope for us, not an odd request.
FAQs – Ameristar Construction Service in Las Vegas
No. We’re an independent service provider and we’re not affiliated with, authorized by, or endorsed by Ameristar. We work on Ameristar cabinetry because we know the product line and its failure patterns, not because the manufacturer sent us. Our work stands on our own written 90-Day Done Right Promise, not on someone else’s badge.
Sometimes, when they’re available – but Ameristar OEM doors and hardware are often special-order or discontinued, so many repairs use color-matched quality aftermarket fronts and standard glides instead. We’ll tell you which is which before you approve anything, and we won’t pass an aftermarket part off as factory. Call (866) 814-4155 for an exact quote – estimates are free.
A door or glide repair is usually a single visit. A partial cabinet replacement with new countertops and backsplash runs longer, because countertop fabrication and template scheduling drive the timeline more than the cabinet work does. We give you a written sequence with dates before we start. Call (866) 814-4155 and we’ll walk through what your particular job involves.
We cover the Painted Shaker (painted and thermofoil), the Raised Panel Oak and Maple, the Thermofoil Flat-Slab Door, and the Framed Standard Overlay Series. If you’re not sure which one you have, a photo of the door edge and the box interior usually settles it. Call (866) 814-4155 and we’ll help you identify it.
Not automatically, but the risk is real if work is done carelessly – cutting into a box in ways the manufacturer doesn’t allow, or replacing hardware with something that stresses the substrate. We work warranty-safe and we’ll flag it if a failure looks like it might fall under Ameristar’s own coverage before we touch it. Call (866) 814-4155 to talk it through.
It depends on scope, but these are the ranges we quote in Las Vegas:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
These are ranges, not quotes. A single-door repair sits well below the cabinet installation figure, and a partial replacement paired with new countertops sits inside the small kitchen remodel band. Call (866) 814-4155 for an exact quote – estimates are free, and a written line-item quote beats a phone number every time.
Book Your Ameristar Service in Las Vegas, NV
If your Ameristar cabinets are peeling, swelling, or coming apart at the seams, get a straight answer about whether they can be saved. Call Barrett & Sons Construction Las Vegas at (866) 814-4155 to schedule your free estimate. We answer live, we put the scope in writing, and we’ll tell you the truth even when the smaller repair is the one we’d rather sell you.
Written by the team at Barrett & Sons Construction Las Vegas.