Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Las Vegas Owner’s Guide
Blanco is a sink and faucet brand, not a cabinet line, so “Blanco kitchen remodeling” in Las Vegas usually means one of two things: your Blanco sink or faucet has failed and you want it replaced as part of a larger kitchen update, or you’re planning a full remodel and want the work built around a Blanco sink you already own. Either way, a full kitchen remodel in Las Vegas runs $14,000 – $45,000 installed, and a sink-and-faucet swap inside that scope typically finishes well under a day once the cabinets and counter are open. We don’t promise same-day service on remodels, because nobody rebuilds a kitchen in an afternoon. We do quote in writing, pull the permits, and show up when we said we would.
Owners usually find the problem the same way. The Blanco Silgranit sink chips at the drain flange and the chip turns into a hairline crack. The faucet drips at the base and the cartridge won’t hold. Or the undermount seal lets go and water starts staining the cabinet floor beneath. By the time it’s visible, it’s been failing quietly for months.
Key takeaways
- A full Las Vegas kitchen remodel runs $14,000 – $45,000 installed; a sink or faucet replacement inside that scope is a smaller line item.
- Blanco sinks and faucets are matched by model number, not by looks. Get the number off the label before you order anything.
- Silgranit can chip and crack at the drain; granite and stainless models fail differently.
- Barrett & Sons is an independent contractor, not affiliated with Blanco. We install and replace Blanco-compatible fixtures as part of kitchen work.
Which Blanco Models This Applies To
Blanco makes sinks in three families that matter for a remodel: Silgranit (the composite granite look), stainless steel, and fireclay. Faucets run under names like the Livia, Artisan, and Sonoma lines. Each sink family has its own cutout dimensions, and each faucet line uses a specific cartridge. A Silgranit Diamond 1.75 bowl is not the same cutout as a Precis 1.75 bowl even though the bowls look close at a glance. That half-inch difference is where counter re-cutting starts.
Find your model number in one of three places: a sticker on the underside of the sink, a stamp on the faucet’s mounting shank, or the paperwork that came with the unit. If the label is gone, measure the cutout underneath the counter and the outer rim, then call Blanco with both numbers. On the faucet side, photograph the base and the spout; a parts counter can usually match the cartridge from the shape.
The OEM-versus-aftermarket call is real on Blanco. OEM cartridges and drain assemblies fit the first time. Aftermarket equivalents cost less and sometimes work fine, but on Silgranit sinks a cheap replacement strainer with a slightly different flange profile is the part most likely to chip the sink again on install. On a $14,000 remodel, saving $40 on a strainer is not the place to economize. We quote OEM by default and tell you when the aftermarket equivalent is genuinely equal.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Kitchen Remodeling Is Failing
- Hairline crack radiating from the drain. Silgranit takes a surprising amount of heat and weight, but the drain flange is the weak point. A crack there means the sink has to come out.
- Persistent drip at the faucet base, not the spout. That’s the cartridge or the O-rings, not the aerator. Left alone, the drip works its way into the cabinet and swells the subfloor.
- Water staining or soft wood inside the base cabinet. Usually the undermount seal or the drain gasket. This one hides until the cabinet is already damaged.
- Wobbly faucet or a moving sink. The mounting hardware has loosened, or the counter cutout is slightly oversized and the clips can’t grab. Both create leaks.
- Chalky white bloom around the rim. Las Vegas water is hard, and the mineral buildup that shows around the rim is also eating the seal underneath it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Las Vegas, here’s the range we quote and stand behind, line-item by line-item:
| Scope | Installed range |
|---|---|
| Full kitchen remodel (Blanco sink and faucet inside the scope) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Countertop installation (cutout included) | $2,000 – $6,500 |
| Cabinet installation | $4,000 – $13,000 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: whether the counter has to be re-cut for a different sink footprint, whether the drain and supply lines get moved, and whether the faucet is a standard single-hole or a bridge style that needs extra drilling. Every price change arrives as a written change order before anyone touches the job. The 90-Day Done Right Promise is written on every contract: if the install isn’t right, one call brings us back to fix it.
DIY or Call Us?
You can safely check a few things yourself. Turn off the water, look under the sink with a flashlight, and note where the wet spot is. Confirm the model number. Check whether the faucet is loose at the base or just dripping internally. That’s the limit of what’s safe.
Water and electricity live in the same cabinet. A slow leak behind a dishwasher or disposal can turn into a shock hazard or a rotted cabinet floor before you notice it. Cutting a counter for a new sink footprint is also where a lot of homeowner installs go wrong: a chipped Silgranit edge from a bad cut is a $700 mistake. When the leak is hidden or the cutout is wrong, that’s the point to call.
We install Blanco-compatible sinks and faucets as part of kitchen work, matched to your model number and quoted before we start. Call (866) 814-4155 to schedule your free estimate. Ask for the free second opinion on any written estimate you already have. Senior and veteran discount applies, and there’s no trip charge inside the county.
FAQs
Expect 12 – 18 years from a well-installed Silgranit or stainless Blanco sink and 8 – 12 years from the faucet cartridge and seals in Las Vegas water. Hard water here cuts cartridge life shorter than in softer-water cities, so a cartridge swap around year 8 is normal, not a sign of a bad faucet. If the sink is past 12 years and already chipped at the drain, replace the sink rather than fight it. Call (866) 814-4155 for an exact quote; estimates are free.
Sometimes. A leaking drain assembly, a bad strainer, or a loose undermount clip can usually be repaired without pulling the sink. A cracked Silgranit bowl or a delaminated fireclay glazed rim cannot. If the crack starts at the drain and travels more than half an inch, replace. Call (866) 814-4155 and we’ll tell you honestly which side of that line you’re on.
A faucet-only swap runs 1 – 3 hours. A sink-and-faucet replacement runs 4 – 6 hours if the counter cutout already matches and no plumbing needs to move. If the new sink needs a different cutout, plan a full day and possibly a temporary counter gap while the stone is worked. We book by appointment, not by promise.
By model number, from Blanco’s parts network, and we confirm the fit before we order. We don’t carry parts on a truck and we don’t claim stock. If the OEM part is back-ordered, we tell you the lead time up front and quote a verified aftermarket equivalent as a written option. Every part in the quote is named and priced, so you can look it up yourself.
Barrett & Sons also installs KraftMaid and Cambria, and works alongside Silestone countertops. Pair any of them with your Blanco sink in one written scope.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.