Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Las Vegas Owner’s Guide
We install and repair Boral windows and doors for Las Vegas homeowners, and the most common call we get is a failed seal or broken roller on a sliding door, or a fogged dual-pane window unit. A straightforward window replacement in Las Vegas runs $4,500 – $15,000 for a whole-house job, and impact window installation for a typical home lands between $8,000 – $25,000. Barrett & Sons Construction Las Vegas is an independent service provider and is not affiliated with Boral. We repair and replace Boral-compatible parts and units every week across the valley.
Owners usually find the problem the same way: a door that won’t slide without a shoulder into it, or a bedroom window that’s suddenly cloudy between the panes at 7 a.m. when the sun hits it. Both point to the same family of failures on Boral products – hardware worn past its travel, or the sealed glass unit gassing out. Neither gets better on its own, and in Las Vegas heat, both get worse faster than most people expect.
Which Boral Models This Applies To
Boral built windows and doors under several lines, and the parts don’t cross between them cleanly. Sliding patio doors and vinyl single-hungs use different roller assemblies, different weatherstripping profiles, and different glass unit thicknesses. The model info is usually on a silver or clear label on the inside of the frame – top jamb on a door, side jamb or bottom sash on a window. If the label is faded or gone, the number matters less than the measurement: the width of the sash channel, the roller wheel diameter, and the glass unit’s overall thickness (Boral commonly used 7/8-inch and 1-inch insulated units) tell you which replacement fits.
Here’s the compatibility gotcha that bites people: a roller from a big-box sliding door looks almost identical to a Boral roller but the wheel diameter and the mounting hole spacing are different, so it binds and chews the track. Match the part to the frame, not to a photo. On the glass side, Boral used several glass suppliers, so the same model year can have different spacer systems depending on where the unit was built. We confirm the actual glazing by measurement before ordering. For kitchens and baths near these openings, we also work with KraftMaid, Cambria, and Silestone, but the Boral conversation stays on windows and doors.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
Las Vegas thermal cycling – 110-degree afternoons and 45-degree winter nights – stresses these parts harder than almost anywhere. Here’s what fails first and why:
- Door won’t slide smoothly or jumps the track. The rollers have worn flat on one side, or the track has pitting from grit. Rollers are the first hardware to go, usually at year 8 to 12.
- Cloudy or hazy glass between panes. The sealed glass unit has lost its gas seal. Once moisture gets in, the desiccant is spent and the haze won’t clear – the glass unit has to be replaced.
- Bathroom or bedroom window that weeps water inside. The frame seal or weatherstripping has shrunk and cracked. Vegas sun dries out the rubber faster than in cooler climates.
- Door that won’t latch or drags at the bottom corner. The hinge or latch hardware has shifted, or the frame has settled. Common on doors facing full afternoon sun.
- Draft or heat pouring in past a closed window. Seal failure combined with a warped sash. We regularly see this on south- and west-facing Boral units after a hard summer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Las Vegas, a window replacement runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000. The range is driven by window count, glass package, and frame size, not by the brand name on the frame. We price parts and labor separately and in writing, so you can see exactly what a replacement glass unit or roller set costs versus the labor to install it, and what a full unit swap adds on top.
- Glass unit replacement (per unit): part plus install, quoted line by line
- Roller or hardware set: part plus install, quoted line by line
- Full window or door replacement: within the $4,500 – $15,000 range above
- Impact-rated replacement: within the $8,000 – $25,000 range above
Every price change comes as a written change order before anyone touches the work – an allowance that isn’t on paper is a surprise waiting for a date. Every job is backed by our written 90-Day Done Right Promise. Current standing offers include $40 off any repair over $200 and a free second opinion on any written estimate.
DIY or Call Us?
What you can safely check yourself: look at the model label, measure the glass unit thickness and roller diameter, and confirm the door track is clean and clear of grit. Those three things tell you whether you’re looking at a hardware swap or a sealed-glass replacement.
Where DIY goes wrong on Boral products: ordering by photo rather than measurement, forcing a mismatched roller into a track, or trying to reuse the frame seal when re-glazing. On a sliding glass door, remember it’s heavy and the glass is tempered – a dropped unit is a hospital visit and a five-figure replacement. We confirm the part, install it to the frame it belongs to, and document the work. Call (866) 814-4155 and we’ll come out, measure, and give you the number in writing.
FAQs
How long do Boral windows and doors last in Las Vegas? Boral windows typically hold their seal for 15 – 20 years, but in Las Vegas heat, seals and weatherstripping often fail closer to year 10 – 12. Sun exposure on south- and west-facing units shortens that further. If you’re past year 10 and seeing haze or drafts, it’s worth a look.
Can the part be repaired instead of replaced? Often, yes. Rollers, latches, and weatherstripping are replaceable on their own without swapping the whole door or window. Glass units usually can’t be repaired once the seal is gone and need replacement. We’ll tell you which side of that line you’re on, and quote both options when it’s close.
How long does the swap take? A hardware or roller set is typically an hour or two. A single glass unit replacement is usually half a day. A full window or door replacement is a longer job and quoted as such. We schedule the work and tell you the timeframe before we start.
How do you source the part? We measure the frame, sash channel, and glass unit thickness, then match it to the correct replacement – not the closest big-box lookalike. Confirming the actual unit before ordering is how you avoid a second trip. Call (866) 814-4155 to get started on a free estimate, and answers are live 24/7 if a door fails on a weekend.
Got a Boral window fogged, a door dragging, or a part you can’t quite identify? Call Barrett & Sons Construction Las Vegas at (866) 814-4155 to schedule a free estimate. We pull permits where required, put every price in writing, and back the work with the 90-Day Done Right Promise. Proudly serving Las Vegas and the surrounding communities.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.