Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Las Vegas Owner’s Guide
We install Boxabl-compatible bathroom remodeling in Las Vegas, and a full bathroom remodel for a Boxabl unit typically runs $9,000 to $28,000, depending on whether you’re refreshing a Casita’s wet bath or expanding it into something roomier. The work is scheduled, not same-day; a bathroom remodel in a Boxabl needs planning, permits, and a written scope before anyone touches a wall. Most owners discover they need this work the same way: the shower pan in their Casita starts flexing underfoot, the factory vanity top chips or separates at the seam, or the compact toilet begins rocking because the flange never sat flush against the module floor. What starts as a small annoyance in a Las Vegas bathroom turns into a water problem fast.
Which Boxabl Models This Applies To
Boxabl’s Casita is the model most Las Vegas owners have in their backyard, and its bathroom is a compact wet-bath layout – shower, toilet, and vanity packed into a footprint much smaller than a stick-built guest bath. When we quote bathroom remodeling for a Boxabl, the first thing we do is verify which generation of the module you have, because the bathroom fixture layout and rough-in dimensions shifted between early production runs and current units. The label inside the unit and the serial plate near the utility connection are what we check, not a guess from photos.
The compatibility gotcha nobody warns you about: Boxabl bathrooms are built on a steel-framed module with a specific floor-to-drain and wall-stud spacing that doesn’t match standard residential construction. An off-the-shelf shower pan or vanity that fits a site-built bathroom often won’t drop into a Casita without a custom curb, an adapter flange, or a framed transition. That’s the moment a “cheap” replacement turns expensive. We measure the actual rough-in before we order a single fixture.
On the OEM-versus-aftermarket decision: genuine Boxabl fixtures guarantee a drop-in fit, but the selection is limited and lead times can stretch. Quality aftermarket fixtures – including premium brands like KraftMaid vanities, Cambria and Silestone tops – give you far more choice and hold up better in Las Vegas heat, as long as we frame and adapt the module correctly. We’re an independent contractor and not affiliated with Boxabl, so we’ll tell you honestly when OEM is the safer call and when aftermarket wins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
- The shower pan flexes or creaks underfoot. That means the substrate or the pan-to-module seal has started to fail, and water is finding its way under the floor. In Las Vegas’s dry heat, a slow leak can hide for months before it shows.
- Water stains or soft spots around the shower base or toilet. Moisture has escaped the wet zone and is soaking the module floor or the wall behind the fixtures. Left alone, it damages the framing and invites mold.
- The vanity top chips, delaminates, or pulls away at the seam. Factory composite tops in the Casita don’t love the temperature swings between a sun-baked backyard and an air-conditioned interior. The seam is usually where it goes first.
- The toilet rocks or the seal keeps failing. A rocking toilet almost always means the flange sits proud of or below the module floor, so the wax ring never seals properly. You’ll smell it before you see it.
- Caulk and grout crack within weeks of repair. Constant movement in a compact steel-framed module shows up first in the bathroom joints. If your fresh caulk splits every few months, the underlying substrate is moving, and patching won’t fix it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Las Vegas Boxabl bathroom, a full remodel runs $9,000 to $28,000. A smaller refresh – new vanity, toilet, and shower surround without moving plumbing – lands in the $5,000 to $12,000 range. A walk-in shower installation runs $4,500 to $12,000, a tub-to-shower conversion $3,500 to $10,000, a straight shower replacement $3,000 to $8,500, and a vanity installation $800 to $3,000.
What drives the range: whether we’re working within the existing module footprint or framing an expanded layout, fixture grade, tile versus a prefab surround, and any plumbing relocation. Every quote is line-item and in writing – fixtures, labor, and any adapter or framing work spelled out. If the scope grows once we open the floor, you get a written change order before we proceed, not a surprise invoice at the end. Every eligible job has permits pulled and inspections signed, and the finished remodel carries our written 90-Day Done Right Promise.
DIY or Call Us?
Some things you can safely check yourself: re-caulking joints, tightening a loose toilet, replacing a vanity faucet, or swapping a showerhead. Those are homeowner-level tasks. Where DIY goes wrong in a Boxabl bathroom is the moment you get into the floor, the drain, or the pan. The module’s steel frame and floor-to-drain dimensions are not forgiving, and a shower pan installed without the right substrate will leak under the floor where you can’t see it – which in a desert climate can quietly rot the structure for a season before it surfaces. Plumbing relocations and any electrical for a new fan or lighting belong with someone who’ll pull the permit.
If your bathroom is at the point of a failed pan, a rocking toilet, or a top that keeps separating, that’s not a caulk-and-forget problem. Call (866) 814-4155 and we’ll take a look and quote it honestly.
FAQs
A properly installed remodel should hold up 15 to 25 years for the fixtures and tile, though Las Vegas’s heat and dry air wear on caulk and seals faster than a humid climate would – figure on re-caulking every couple of years. The key is fixing the underlying substrate issue so the new work isn’t fighting the same movement that failed the original.
Sometimes, yes. A toilet reseat, a new vanity top, or a shower re-seal can buy years if the substrate is still sound. But if the pan or floor has been leaking, repair is a patch over a bigger problem. We’ll tell you which one you’re looking at before you spend a dollar – call (866) 814-4155 for a free second opinion on any written estimate you already have.
A focused refresh runs about a week; a full remodel with framing and new tile typically runs two to four weeks, plus permit and inspection time. We give you the timeline in writing up front so you’re not guessing. Call (866) 814-4155 to schedule your free estimate.
We measure your unit’s actual rough-in first, then source OEM Boxabl fixtures when a drop-in fit matters most, or quality aftermarket fixtures – including KraftMaid, Cambria, and Silestone – when you want more selection and better wear. You’ll see exactly what we’re specifying on the written quote, with no mystery brands. Call (866) 814-4155 and we’ll walk you through the options.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.