Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Las Vegas Owner’s Guide
Bathroom remodeling work matched to CGI fixtures in Las Vegas typically runs $9,000 to $28,000 for a full bath and $5,000 to $12,000 for a small one, and we schedule most of it within a week or two of an approved written scope. If a CGI shower valve, drain, or surround has failed, you usually find out the hard way: a drip you can hear through the wall at night, a hairline crack spreading from a drain flange, or a soft spot in the subfloor that wasn’t there last spring. Barrett & Sons Construction installs and repairs CGI-compatible bathroom work across the valley.
Which CGI Models This Applies To
CGI makes a broad line of bath products, and the part you need depends entirely on which box or casting you’re working with. Before anyone quotes you anything, we identify the exact model from one of three places: the label on the back of the surround panel, the stamped mark on the drain body or valve trim, or a tape measure if the sticker’s long gone. Getting this right matters, because CGI finishes and panel profiles have changed across production runs, and a surround panel that looks identical at arm’s length often won’t index into the wall channel of a different series.
The OEM-versus-aftermarket call is where a lot of Las Vegas homeowners get talked into the wrong thing. Genuine CGI replacement parts carry the correct dimensions for your specific series, which matters most on drain assemblies and valve cartridges, where a fraction of an inch is the difference between a seal and a slow leak. For trim, escutcheons, and finish pieces, a quality aftermarket equivalent is often fine, and honestly, sometimes better made. We tell you which is which before you spend the money. We’re an independent contractor and not affiliated with CGI, so our only stake is getting your bath watertight and squared away.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
Most failures show up in the same order. Here’s what to watch for:
- A persistent drip at the shower valve stem. Usually a worn cartridge or seat. Once the cartridge cracks, water sneaks behind the trim plate and starts softening the wall cavity rather than running into the pan where you’d notice it.
- A hairline crack radiating from the drain flange in the shower pan or tub floor. Flex underfoot plus Las Vegas’s hard water and wide day-to-night temperature swings work on the same spot for years. A crack that size rarely stays cosmetic once water finds it.
- Caulk that keeps failing at the wall-to-pan seam within months of redoing it. Recaulking over movement or a loose panel buys you a season, not a fix. The panel or the substrate behind it is usually the real problem.
- A soft or spongy spot in the subfloor near the toilet or drain. That’s water that’s been arriving for a while. Gypsum and plywood in a Las Vegas bathroom dry out fast on the surface but stay damp underneath where airflow doesn’t reach.
- Water staining on the ceiling below, or efflorescence crusting on the tile grout. Efflorescence is mineral salt pushed out by moisture moving through. When you see it in a bath that hasn’t had a leak you knew about, the moisture is coming from somewhere you can’t see.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers land in Las Vegas, installed:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
The range is driven by what’s behind the wall, not what you can see. A straight fixture swap sits at the low end. Rotted subfloor, a moved drain, or a valve that needs the wall opened pushes it toward the top, and you’ll know which before we start because every scope and allowance is written down. Price changes come to you as a written change order before any work happens. Every eligible job gets permits pulled and inspections signed, and every completed job carries our 90-Day Done Right Promise in writing.
DIY or Call Us?
You can safely check a few things yourself: run the shower and watch where water actually goes, press on the floor around the drain for softness, look at the ceiling below, and read the model label off the surround. What we’d steer you away from is opening the wall, pulling a valve cartridge on a live water line, or tearing out a pan to “see what’s under there.” A failed shower pan on an upper floor can put water into the ceiling of the room below in an afternoon, and a snapped valve body under pressure makes a mess fast. Those are jobs for someone who’s done a few hundred of them. Our crew members carry up to 28 years of experience and are background-checked. If you’re not sure whether you’re looking at a five-minute fix or a weekend project, call (866) 814-4155 and we’ll tell you straight.
FAQs
Most CGI pans and surrounds hold up 15 to 25 years with decent care, but Las Vegas shortens that. Our water runs hard, mineral-heavy, and the valley’s summer heat and dry winters make the caulk joints at the wall-to-pan seam move more than in a milder climate. Re-sealing those joints every two to three years is the single thing that stretches a pan’s life the most.
Often yes. A dripping valve is usually a cartridge and seat, not a whole valve body, and a cracked surround panel can sometimes be swapped without touching the pan. A cracked shower pan itself is the one we rarely patch, because a patch on a flexing floor is a temporary fix. We’ll tell you which category yours falls into before you commit to anything, and the estimate is free.
A valve cartridge or trim replacement is usually a couple of hours. A surround panel swap runs one to two days. A full shower replacement or tub-to-shower conversion is typically three to seven days depending on tile, dry time, and inspection scheduling. Call (866) 814-4155 for a timeline on your specific bath.
We identify your exact model from the label or a measurement, then order the correct part for that series, either OEM or a quality aftermarket equivalent, whichever makes sense for the piece. We don’t keep parts on a truck or in a warehouse, so lead time depends on what’s in stock at the supplier. We tell you the wait before you approve it. Call (866) 814-4155 to get started with a free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.