Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Las Vegas Owner’s Guide
We install and repair CGI windows and doors across the Las Vegas valley, and the honest ballpark for most homeowners is $4,500-$15,000 for a full window replacement or $8,000-$25,000 when you go impact-rated, with single window and door repairs running far less. Same-day service isn’t something we promise on planned window and door work – real installations get scheduled, measured, and permitted when needed. What we can promise is a written, line-item estimate before anyone touches a frame, and that call (866) 814-4155 gets a live person, not a voicemail box.
Most Las Vegas owners don’t discover a CGI failure on a schedule. They find it the way everyone does: a window that suddenly won’t latch in July, glass that fogs between the panes, a sliding door that scrapes the track every time the house settles in the heat, or water staining the drywall under the sill after a monsoon dump. If you’re there, you already know something’s wrong. This page is built to help you figure out exactly what.
Which CGI Models This Applies To
CGI (the brand, not to be confused with a computer-graphics firm) makes aluminum and vinyl windows and doors, and their product lines are common in Las Vegas homes built from the mid-1990s forward – especially the single-family developments spread through Summerlin, the southwest valley, and Henderson’s older tracts. The single biggest compatibility gotcha we run into: CGI changed frame extrusions and glazing bead profiles across product generations, so a replacement sash or a new operating door panel from one series will not drop into a frame from another. Measure the frame opening, the glass unit itself, and note the series – usually on a small etched label on the glass edge or a sticker inside the jamb – before you order anything.
On the OEM-versus-aftermarket question for CGI specifically: factory parts are the safe route when your frame is still sound and only the sash or hardware failed, but genuine CGI replacement parts for older series can be slow to source and priced accordingly. Quality aftermarket equivalents – particularly for rollers, weatherstripping, locks, and balance hardware – are often a better match in Las Vegas because the heat degrades the originals anyway. We’re an independent service provider, not affiliated with CGI, which means we tell you which route actually makes sense instead of pushing one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
- Fogging or condensation between the panes. That’s a failed seal in the insulated glass unit, not a cleaning problem. Once the seal breaks, the unit can’t be restored and has to be replaced – a common failure in Las Vegas because the daily temperature swing expands and contracts the seal until it gives.
- A window or door that won’t latch or lock smoothly. Usually a worn lock mechanism, a shifted strike plate, or a frame that has moved with the house. This one is a genuine security concern, so it’s worth fixing before the next windstorm.
- A sliding door that drags or grinds. Worn rollers or a track packed with desert grit and dust. Left alone, the dragging warps the panel and turns a cheap roller swap into a full panel replacement.
- Water intrusion at the sill or jamb after rain. Failed weatherstripping, deteriorated sealant, or a sill that was never properly flashed. Las Vegas monsoons are short but intense, and a small leak becomes rotted framing fast.
- Visible cracks in the glass or a rattling panel. Stress cracks from thermal cycling or impact damage. A cracked pane in an impact-rated window means the unit’s protection is gone and it needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Las Vegas, standard window replacement typically runs $4,500-$15,000 for a whole-home job, and impact window installation runs $8,000-$25,000 depending on the number of openings and the spec. What drives the range: how many windows, the size and shape of each opening (arches and oversize sliders cost more), whether you’re choosing standard glass or impact-rated glass, and whether the existing frames are reusable or need rebuilding.
You get a written, line-item quote so you can see parts and labor separately – something an allowance that isn’t on paper will never give you. If the scope changes mid-job, that change arrives as a written change order before any work proceeds, not as a surprise line on the final invoice. Every completed job is backed by our 90-Day Done Right Promise in writing, and calls are answered by a live person 24/7. We also service KraftMaid, Cambria, and Silestone products if your project touches the kitchen or bath alongside the windows.
DIY or Call Us?
There’s a real split here, and it matters for your safety and your wallet. You can safely check for a failed seal by looking for fog between panes, test whether a window latches, clean a sliding-door track, and check the weatherstripping with your hand for gaps. Those are fair owner checks.
Where DIY goes wrong: replacing an insulated glass unit or a full sash requires matching the exact CGI profile, and getting it wrong leaves you with a leaking, non-latching window that’s worse than what you started with. Window and door work on upper floors, and reinstalling a heavy impact-rated panel, carries real fall and injury risk – that’s a job for a trained crew with the right equipment. If a window is cracked, a door is off its track, or water is getting in, call (866) 814-4155 and we’ll give you an honest read before you spend a dollar.
FAQs
How long do CGI windows and doors last in Las Vegas? Typically 15-25 years for the glass unit and 20-30 years for the frame in our climate, though the extreme heat and daily temperature swings mean seals and weatherstripping usually fail first – often around the 12-15 year mark. If your windows are older than that, fogging and drafts are the early warnings. Call (866) 814-4155 for a free estimate on replacement.
Can a failed CGI window be repaired instead of replaced? Yes, often. A fogged insulated glass unit, a worn roller, a broken lock, or failing weatherstripping can usually be repaired without touching a sound frame, which saves you real money. Full replacement makes sense when the frame itself is warped, rotted, or cracked. Call (866) 814-4155 and we’ll tell you which one you’re looking at.
How long does the swap take? A single window or door repair is usually a few hours; a full-home window replacement typically runs one to three days depending on the number and size of openings and whether permits are required. We’ll give you the schedule in writing before we start. Call (866) 814-4155 to get your free estimate.
How do you source the CGI part? We measure your frame and series, then source factory parts when they’re the right match and quality aftermarket equivalents when they fit better or the OEM part is slow to arrive – and we tell you which is which up front. No mystery parts off a van. Call (866) 814-4155 to schedule your free estimate.
If a CGI window or door in your Las Vegas home has stopped doing its job, the fastest way to a straight answer is a free estimate. Call Barrett & Sons Construction Las Vegas at (866) 814-4155, and we’ll look at the actual part, measure the opening, and hand you a written quote with the parts and labor broken out. The 10% Senior & Veteran discount is permanent and always available, and if you already have a written estimate from someone else, we’ll give you a free second opinion on it.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.