Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Las Vegas Owner’s Guide
Bathroom remodeling that includes CWS-based components in Las Vegas typically runs $9,000 to $28,000 installed, depending on whether you’re refreshing a hall bath or taking a primary suite down to the studs. If your CWS-made vanity, shower surround, faucet set, or fixture has started to fail, we replace or rebuild the affected section with compatible parts and get the room back to full use. Most owners spot the problem the same way: a soft spot under the vanity cabinet, caulk that opens up again two weeks after they fixed it, or a shower pan that stays damp long after the last person showered.
Key takeaways:
- Installed CWS-compatible bathroom remodeling in Las Vegas: $9,000 to $28,000.
- CWS parts are matched by model and series, not guessed by size alone.
- We’re an independent contractor, not affiliated with CWS. We source compatible components and install them, and we say plainly what’s OEM and what isn’t.
- Permits pulled, change orders written before work moves, and our 90-Day Done Right Promise on every job.
Which CWS Models This Applies To
CWS has built bathroom vanities, shower surrounds, and fixture sets in several series over the years, and the parts are not interchangeable between them even when the outside dimensions look identical. The model and series line is stamped on a label inside the vanity cabinet door, behind the drawer box, or on the back panel of a shower wall unit – pull the drawer or look underneath with a flashlight. Write down the full model string, not just the first few characters. Series revisions change hinge bore spacing, drain placement, and the mounting pattern on faucet decks, and we’ve seen owners order a “matching” part that was off by an eighth of an inch and wouldn’t seat.
On the OEM-versus-aftermarket question, be direct with yourself about what you need. For load-bearing cabinet boxes, shower pans, and anything carrying water under pressure, OEM or a certified equivalent is the right call; a knockoff pan that flexes will crack within a couple of Nevada summers. For trim, escutcheons, handles, and filler pieces, a quality aftermarket match is fine and often cheaper. We’ll tell you which category your part falls into before anyone orders anything. KraftMaid, Cambria, and Silestone also come up on these jobs when an owner is upgrading cabinetry or countertops while the bathroom is open.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
Las Vegas is hard on bathroom components. Low desert humidity, water that runs mineral-heavy, and indoor temperatures that swing with the air conditioning cycle all speed up wear on caulk, seals, and cabinet substrate. Here’s what we see most.
- Caulk that reopens along the shower pan or tub edge. The joint is moving because the pan or surround has shifted slightly, and fresh caulk over a moving seam will always fail again.
- Soft or swelling vanity cabinet floor. Water has been getting past a seal for months. The cabinet bottom is the last place it shows, which is why it’s often the worst spot when you find it.
- Standing water or a slow drain in the shower pan. A pan that was pitched slightly off at install, or a drain fitting that’s worked loose, will pool water and start to stain the material below.
- Loose or dripping faucet body at the deck. The mounting nut has backed off or the O-ring has dried out. Simple on its own, but it’s a common entry point for water into the vanity top.
- Tile or surround panels popping loose. Adhesive failure after years of heat cycling. Once a panel is off the wall, the backing behind it needs to be checked before anything new goes back on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what bathroom remodeling work in Las Vegas typically runs, with the parts and labor broken out honestly:
- Full bathroom remodel: $9,000 to $28,000
- Small bathroom remodel: $5,000 to $12,000
- Walk-in shower installation: $4,500 to $12,000
- Tub-to-shower conversion: $3,500 to $10,000
- Shower replacement: $3,000 to $8,500
- Bathroom vanity installation: $800 to $3,000
What drives the range: whether the shower pan comes out, whether the wall behind it needs new substrate, tile versus acrylic surround, and how much plumbing has to move. We give you a written line-item quote showing parts and labor separately, and any price change arrives as a written change order before work happens – an allowance that isn’t on paper is a surprise waiting for a date. Permits are pulled and inspections signed on every eligible job. Every completed job carries our written 90-Day Done Right Promise.
DIY or Call Us?
There’s a real line here, and it’s worth being honest about. You can safely check and replace a faucet aerator, swap a handle or trim piece, re-caulk a tub edge that isn’t moving, and tighten a loose toilet seat. Those are reasonable Saturday jobs.
Where it goes wrong: opening up a shower pan or wall to find the leak, moving a drain, replacing a shower valve body, or doing anything that requires shutting off and reconnecting water lines behind a wall. A bad valve replacement can flood a bathroom in minutes, and water damage in Las Vegas often stays hidden in the wall cavity until it’s a much bigger job. If you’re not sure what’s behind the panel, that’s the moment to call. Reach us at (866) 814-4155 and we’ll talk it through, no pressure either way.
FAQs
How long do CWS bathroom components last in Las Vegas?
A well-installed CWS vanity cabinet or shower surround typically holds up 12 to 20 years in this climate, but the seals and caulk around them need attention every 3 to 5 years because of the dry heat and hard water. The component usually outlasts the seal, and the seal is what protects everything else.
Can the part be repaired instead of replaced?
Often yes – a loose faucet or a re-caulkable joint is a repair, not a replacement. But once the cabinet substrate is soft or a shower pan is flexing, repair is throwing money at a problem that comes back. We’ll tell you which one you’re looking at.
How long does the swap take?
A vanity or faucet set is usually a one-day job. A shower replacement typically runs 2 to 4 days, and a full bathroom remodel runs 2 to 4 weeks depending on scope and inspection timing. We give you the schedule in writing up front.
How do you source the CWS part?
We pull the model string from your label, confirm the series, and order OEM or a certified equivalent depending on which the part calls for. We don’t stock parts or carry them on a truck – we order what your model needs and schedule the install around it. We’re an independent contractor, not affiliated with CWS, and we’ll be clear about that before any order goes in.
Barrett & Sons Construction is owner-operated, founded in 1998, and proudly serving Las Vegas and nearby communities for over 29 years. Tom Barrett publishes his name, his address, and his license number – look it up before you sign anything. Calls are answered by a live person 24/7. Ask about our $40 Off Any Repair Over $200, Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount. Scope in writing, allowances in writing, change orders in writing – that’s how we work.
Call (866) 814-4155 to schedule your free estimate on your CWS bathroom project in Las Vegas.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.