Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Las Vegas Owner’s Guide
We install CWS-compatible paver driveways in Las Vegas for $7,000 – $18,000, and we install them as independent professionals, not as CWS. You know you’re here because something’s already wrong: sunken pavers at the apron, joints that have washed out across the driveway, or an inch of settling where the slab met the garage door. In Las Vegas, most CWS paver failures we see aren’t product failures at all – they’re base and drainage failures, because the same caliche-laced soil that makes excavation slow here pushes water sideways instead of down, and the pavers sit on top of that decision. Call (866) 814-4155 and we’ll look at the actual problem before quoting a part.
Which CWS Models This Applies To
CWS (Concrete Wall Systems) paver work isn’t the same as the retaining wall and block side of the business, and owners who cross-reference catalogs get confused. The paver side runs on standard nominal face modules – 60mm thickness is the common structural unit for driveway traffic, with 80mm used on heavy truck aprons – and the interlock pattern matters more than the color family when you’re replacing a run. If you’re trying to match a piece, don’t order from memory.
- Measure the failed unit’s face dimensions in inches, not the box label – nominal 4×8 and 6×9 read slightly over on a tape.
- Photograph the stamped bottom of an intact neighbor unit – molds vary by run and the underside tells you more than the top.
- Match thickness first: mixing 60mm with 80mm in one field creates a rocking joint that fails fast in Las Vegas heat.
- Ask whether the piece is a field unit or a cap/edge unit – they come off different pallets and don’t interlock the same way.
OEM matching is ideal when the run is still produced. It’s not always necessary. A quality aftermarket paver that matches thickness, face module, and color family will install correctly and pass the same inspection – what you can’t do is drop in a mismatched thickness and expect a stable field. We’ll tell you which path your driveway actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
The symptoms below aren’t cosmetic. In our experience each one points to a cause underneath the surface, and replacing pavers without fixing the cause just buys you the same failure on a new schedule.
- Depressions and waffling across the drive. Usually sand bedding that was never compacted in lifts, or base that was laid too thin for the traffic load. In Las Vegas, a driveway that felt solid in March can dip noticeably by August.
- Joint sand washing out in the first rain of monsoon season. Poor drainage or a poly sand that wasn’t installed to spec. When joint sand leaves, the pavers start moving against each other and chipping on the edges.
- Rocking or loose individual units. Failed bedding beneath that one unit. The fix is rarely just re-set the paver – the base under it is what gave up.
- Ponding water at the apron or along the garage side. A slope problem, and the one that does the most expensive damage. Water that sits against the slab reaches the garage sill and the wall plate behind it.
- Efflorescence or chalky white haze that keeps returning after cleaning. Moisture trapped in the base, not a surface stain. It comes back because the water source hasn’t been dealt with.
Replacement Cost & What’s Included
Here’s what our installs actually run in the Las Vegas market, with the range set by drainage correction, base depth, and pattern complexity rather than brand name:
| Work | Typical installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
Every quote we write is line-item and in writing, with any change order issued before the work moves – no surprise invoices. A driveway that needs base correction and a re-grade costs toward the top of the range; a straightforward re-lay on a sound base sits lower. Permits are pulled and inspections signed on every eligible driveway job. The work carries our written 90-Day Done Right Promise: if it’s not right, Tom comes back and makes it right on one call.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
A homeowner can safely check some of this. Walk the drive and mark the soft spots with chalk. Look at where water pools after rain. Take a photo of a joint that’s washed out and note whether the pavers around it rock. That’s all useful information to hand us.
What a homeowner shouldn’t do is excavate and re-set a paver field on their own. The failure you’re looking at is almost always in the base, not the surface, and re-setting pavers on the same bad base is a two-weekend project that fails again the first monsoon. Worse, once the base is opened, a driveway apron that isn’t properly recompacted becomes a safety issue – a rolling paver under a foot is a fall. There’s also the permit question: work at an apron or a wall tie-in can require inspection, and we pull it. We’ll tell you honestly if your driveway is a genuine DIY fix. If it isn’t, call (866) 814-4155.
FAQs
How long do CWS pavers last in Las Vegas? The paver itself typically lasts decades; the base and joint sand are what fail first, often inside 5 to 10 years in this heat and soil. If your driveway is older than that and showing movement, the issue is almost always the install beneath it.
Can it be repaired instead of replaced? Usually the surface paver can be replaced as a unit; the question is whether the base under it needs correction too. We pull and inspect before recommending, and if a smaller fix will hold, we’ll say so. Call (866) 814-4155 for a free second opinion on any written estimate you’ve already been given.
How long does a paver replacement take? A single failed run or a small repair is typically a one-day job. A full driveway replacement usually runs several working days depending on base depth and drainage work. We give you the schedule in writing before we start.
How do you source the part? We match by thickness, face module, and color family, using OEM CWS units where the run still produces them and quality aftermarket equivalents where it doesn’t. You’ll see the source in the written line item before we order.
We’re not affiliated with CWS – we’re an independent, owner-operated Las Vegas construction company. We also install and repair hardscape under other premium lines, and handle KraftMaid, Cambria, and Silestone on the interior side when a project turns into more.
Get This Fixed Right
A paver driveway that’s failing is a base problem wearing a surface costume, and Las Vegas soil and monsoon water make quick fixes expensive later. We serve homeowners across the Las Vegas valley and nearby communities, with crew members who are background-checked, uniformed on every visit, and carry the Barrett & Sons name. A live person answers the phone 24 hours a day, seven days a week – not a voicemail box. We’re proud to offer no trip charge inside the county, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% senior and veteran discount. Call (866) 814-4155 to schedule your free estimate – we’ll price the part and the base under it, in writing.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.