A Barrett company - serving Las Vegas, NV
C

CWS Construction Service in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Las Vegas Homeowners Choose CWS Construction

We provide independent CWS installation, repair, and refacing service in Las Vegas, handling CWS’s Aberdeen Shaker fronts, Euro-style frameless cabinet boxes, and the vanity and quartz lines that pair with them. We’re not affiliated with or authorized by CWS; we buy, fit, and finish their boxes and fronts as an independent installer, which means we quote the fix your kitchen actually needs instead of steering you toward a factory replacement. Call (866) 814-4155 to schedule a free estimate.

Call (866) 814-4155

Our technicians have up to 28 years of experience, and much of it has been spent inside Clark County homes where desert heat, sun, and dust do specific things to cabinetry. We know what a CWS drawer glide sounds like after a few summers in Summerlin and why a frameless box creeps out of square on a stucco-and-metal-stud wall. That’s the kind of CWS knowledge we bring when we look at your kitchen or bath.

Why Trust Barrett & Sons Construction Las Vegas for Your CWS Construction?

CWS cabinets reward the installer who reads the panel. The company’s Euro-style full-overlay boxes are frameless, which means the side panels carry the load and the boring for every hinge is set at the factory. Get the anchoring or the hinge pattern off a few millimeters and doors rub. Our technicians understand how CWS structures its boxes, doors, and glide tracks, so when we hang replacement fronts or swap hardware we align with the boring lines the cabinet was built to.

We quote the parts the job actually needs. Where the CWS hinge or glide line is still current, we use genuine OEM-compatible hardware so the finish, hole spacing, and soft-close feel match what you already have. Where a line is discontinued, we source quality aftermarket soft-close hardware and matched door fronts that fit the existing box.

Every scope and every price change arrives as a written change order before we touch a cabinet. That’s how we keep a CWS repair from turning into a surprise invoice. Call (866) 814-4155 to set up your free estimate.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CWS Construction Problems We Fix in Las Vegas

  • Soft-close glides that sag or stop latching. Desert dust works its way into full-overlay CWS boxes and the glide tracks get gritty. Heat cycling then warps the glides slightly, and drawers start closing proud or not at all. We replace the glides with OEM-compatible soft-close hardware and clean out the tracks.
  • Painted Aberdeen or Shaker fronts checking and peeling at the edges. The sun-facing side of a Las Vegas kitchen gets hammered by UV and swung between 105°F afternoons and cool nights. Painted MDF fronts check, blister, and peel at the panel edges first. These usually need refacing or replacement rather than a touch-up.
  • Frameless CWS boxes pulling away from the wall. When a prior install skipped blocking or shot tapcons into a hollow stucco-and-metal-stud wall, the box shifts and goes out of square. Doors rub, gaps open. We re-anchor and shim the run.
  • Vanity and sink bases swelling and delaminating. CWS vanity and linen cabinet toe kicks take the worst of it in a bathroom. A slow leak under the sink plus the humidity swings of a shower going every morning will swell the particleboard substrate. If the box is water-swollen, it’s a replacement case.
  • Countertop programs that don’t line up with the box. Getting CWS quartz fabricated to fit a frameless cabinet run takes careful templating. When the base is out of level, the countertop rocks and the seams open. We address the box before the stone.

These all sound different, but they usually trace back to two forces: Las Vegas heat and Las Vegas dust. A kitchen here isn’t fighting water the way it would in a wetter climate. It’s fighting UV and expansion cycles, and that shows up in the front edges and the hardware first.

CWS Parts & Our Repair-vs-Replace Approach

Parts get sourced per job, not off a shelf. When your CWS line is current, we order the OEM hinges, glides, and matching door fronts so the finish and boring line up and the cabinet looks like it was never touched. When a line is discontinued, we move to quality aftermarket soft-close hardware and locally matched fronts that share the door thickness and rail profile of your existing boxes.

The repair-or-replace call is honest, and it comes down to the box. A sound CWS carcass with worn glides and a couple of tired doors is a repair or a reface job. A box that’s swollen from a slow leak or so far out of square it won’t come back is a replacement. We tell you which one you have, in writing.

A typical CWS kitchen call is a run of full-overlay cabinets where doors have begun rubbing and drawers no longer close flush. The usual cause is worn glides plus a box that shifted slightly out of square after the original install. The fix is to re-anchor and shim the run to the wall, replace the glides and hinges, and adjust or replace only the door fronts that are actually damaged rather than tearing out sound CWS boxes. Where the fronts are peeling at the edges, a pro will often reface with matched doors and new hardware instead of a full cabinet replacement. Call (866) 814-4155 for a free estimate and we’ll walk you through which case you’re in.

Our CWS Service Process – Step by Step

  1. 1
    Diagnosis. We open the drawers, check the hinges, and run a level and square across the CWS boxes. We feel for soft spots in the toe kicks and inspect the door edges for checking.
  2. 2
    Written scope and estimate. Every line goes on paper: which glides, which fronts, whether we’re re-anchoring, refacing, or replacing. Any change arrives as a written change order before work moves.
  3. 3
    Repair or install. We anchor and shim the run, install the new hardware or fronts, and template the CWS countertop if the job calls for one.
  4. 4
    Test. Every door and drawer gets opened and closed a dozen times. We check the reveal, the latch, and the soft-close feel before we leave.
  5. 5
    Warranty. Every completed job is backed by our 90-Day Done Right Promise, written on the contract. If something isn’t right, one call brings Tom back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CWS Products We Service & Install in Las Vegas

We work across the CWS lines that show up in Las Vegas kitchens and baths. That includes CWS Aberdeen and Shaker-style painted and stained cabinet fronts, the Euro-style full-overlay frameless cabinet boxes, the vanity and linen cabinet lines for bathroom remodels, and the CWS quartz and granite countertop programs paired with that cabinetry. We also reface CWS boxes with matched fronts and new soft-close hardware, install new cabinet runs into existing layouts, and set quartz and granite counters on sound CWS bases. If you’re unsure which line you have, snap a photo of the inside of a drawer box and we can usually place it.

We Also Service These Brands

CWS is one brand in a larger toolbox. We also install and service KraftMaid, Cambria, Silestone, and Kohler, along with the other premium brands we carry across every trade. That means if your kitchen has CWS boxes and a Kohler sink under a Cambria counter, one call covers all of it, quoted together, with the same written change order process.

FAQs – CWS Construction Service in Las Vegas

CWS Kitchen Work in Las Vegas – Price Ranges
Service Price Range
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000
Full Kitchen Remodeling $14,000 – $45,000
Small & Partial Kitchen Remodels $9,000 – $20,000

Book Your CWS Service in Las Vegas, NV

CWS cabinets get called for a reason, and most of the time the boxes are still good. Worn glides, edge peeling, and a run that slipped out of square are repair and reface work, and that’s where we come in. There’s no trip charge inside Clark County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (866) 814-4155 to schedule your free estimate in Las Vegas.

Written by the team at Barrett & Sons Construction Las Vegas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch