Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Kitchen Remodeling: The Las Vegas Owner’s Guide
James Hardie kitchen remodeling in Las Vegas runs $14,000 – $45,000 for a full kitchen, or $9,000 – $20,000 for a smaller galley or condo kitchen, and we schedule these as planned installs, not drop-in repairs. Most owners come to this page after a handyman, a flipper, or a previous contractor left them with Hardiebacker seams that telegraph through the floor tile, a fiber-cement underlayment that wasn’t fastened to spec, or a kitchen that was never designed around the hard, dry reality of a Las Vegas summer. If your kitchen was built or “upgraded” years ago and the floor, walls, or door and window openings are showing the first strain, the underlying part has usually failed before the finish ever does.
Which James Hardie Models This Applies To
James Hardie’s kitchen-relevant product line is narrower than most homeowners expect, and getting it right matters. The piece that shows up in a kitchen is Hardiebacker cement backerboard, sold in 1/4-inch (floor underlayment and countertop base) and 1/2-inch (wall and floor) thicknesses, in 3×5 and 4×8 sheet sizes. It also includes HardiePanel vertical siding and HardieTrim boards that show up on exterior walls and around sliding-door openings. Hardiebacker is not interchangeable with gypsum-based tile backer; the thickness, the fiber-cement composition, and the fastener pattern all differ. To identify what you have, pull the printed stamp from the face of an exposed edge (it lists thickness, series, and the “Hardiebacker” branding), or measure a cut edge with a tape. Sheet thickness and the fastener schedule are the two numbers your replacement has to match.
On the OEM-versus-aftermarket question: for Hardiebacker, there’s no meaningful “aftermarket equivalent” worth chasing, because the cement-fiber density and the fiberglass mesh are the part. HardieTrim and HardiePanel boards, on the other hand, are routinely matched with a quality fiber-cement board of the same dimensions and finish. Where it gets tricky is finding a supplier who stocks the exact thickness and sheet size in Las Vegas at a fair price, which is why we source through established local distributors rather than whatever’s on a rack at a big-box store. We’re an independent contractor, not affiliated with James Hardie; we install and replace these materials.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Kitchen Remodeling Is Failing
- Cracks or loose seams in the tile floor. The Hardiebacker underneath has likely shifted, been screwed short, or was laid over a substrate that isn’t flat. In Las Vegas, a slab that heats and cools fast will telegraph every gap straight through the tile.
- Hollow sound when you tap the floor or wall. That’s a sign the backerboard has separated from the framing or subfloor, usually because fasteners were spaced too far apart or never hit a stud.
- Water staining or soft spots around the sink and dishwasher. Hardiebacker handles moisture far better than gypsum, but a slow leak left unaddressed will still soften the edge and the fasteners.
- Visible gaps at cabinet bases or door openings. When the board wasn’t cut square or the kitchen shifted, the trim and cabinet gaps open up. That’s a fitting problem, not just a cosmetic one.
- Bubbling or peeling paint near a sliding door. On a HardieTrim board that faces the exterior wall, this usually points to failed caulk and sun exposure, not the board itself. Las Vegas UV is hard on any exterior trim.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full kitchen remodel in Las Vegas, most jobs land in the $14,000 – $45,000 range. A smaller kitchen comes in around $9,000 – $20,000. If your job is specifically new cabinets, cabinet installation runs $4,000 – $13,000; countertops are $2,000 – $6,500; a backsplash is $800 – $2,500; and a new kitchen island is $3,000 – $10,000. What drives the number: the size of the kitchen, whether the layout changes, the finish level you choose, and how much of the existing Hardiebacker and subfloor has to come up and be replaced before the new surface goes down. Labor and material are itemized in the written quote, not bundled into one mystery line. The work is backed by the written 90-Day Done Right Promise: if it’s not right, one call brings Tom back. We also pull the permits and get the inspections signed on the eligible scopes.
DIY or Call Us?
Some of this is within reach: you can pull an exposed edge to read the stamp, measure the existing sheet thickness, and tap the floor to listen for hollow spots. Those checks will tell you what board you’re replacing. What we’d steer you away from is laying Hardiebacker over a slab yourself without checking flatness, or replacing a floor underlayment and setting tile on top of it without the right fastener pattern. It isn’t dangerous in the electrical or spring sense, but it’s unforgiving: a mis-set backerboard will crack the tile above it within a season of Las Vegas summer heat. If you’re not sure, call (866) 814-4155 and we’ll walk through it.
FAQs
Installed to spec, it can last decades. The failure you’re seeing is usually not the board itself; it’s the fastening, the flatness of what’s under it, or water left to sit.
Sometimes. If the problem is a few loose fasteners or a failed caulk line at an exterior trim board, a targeted repair is often enough. If the board is cracked, soft, or separated from the substrate, replacement is the honest answer.
A single localized repair (a countertop base, a section around a sink) is often a 1-day job. A full kitchen remodel that touches cabinetry, countertops, and underlayment is a multi-week project, and the schedule is written into the estimate.
We source Hardiebacker, HardieTrim, and HardiePanel through established local distributors and confirm the exact thickness and sheet size against your existing material before it’s ordered. Every material line goes on the written quote.
Yes, on every eligible job. The permit inspector works for you, not for us, and we want the inspection signed before the job is called done.
Not without a written change order in hand first. Every scope, allowance, and price change arrives in writing before a single nail moves. An allowance that isn’t on paper is a surprise waiting for a date.
No. James Hardie’s kitchen-relevant line is the backerboard, trim, and panel; for cabinets and counters we install KraftMaid, Cambria, and Silestone, among other premium brands. If you’re not sure what you need, ask us.
Barrett & Sons Construction Las Vegas is owner-operated and has been serving Las Vegas and nearby communities for over 29 years, founded in 1998. Tom Barrett and his sons are on-site most days, and every price change comes in writing before work happens. Our crew members have up to 28 years of experience, and we answer the phone live, 24/7. We’re an independent contractor, not affiliated with James Hardie.
Call (866) 814-4155 for a free estimate on your James Hardie kitchen remodel in Las Vegas. Standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Estimates are free, and there’s no pressure to book anything the same day; these are planned installs.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.