Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The Las Vegas Owner’s Guide
Kohler kitchen remodeling in Las Vegas typically runs $14,000 – $45,000 installed, with cabinet installation at $4,000 – $13,000, countertops at $2,000 – $6,500, and backsplash work at $800 – $2,500. Kohler is a fixture and fittings brand, not a cabinet line, so the “Kohler part” in your kitchen is usually the sink, the faucet, the filtration system, or a component inside one of them. Most Las Vegas owners find the failure the same way: a slow drip under the sink base that swells the cabinet floor, a pull-down sprayer that stops retracting, or a hands-free faucet that starts turning itself on at 2 a.m. We install and replace Kohler fixtures and the cabinetry and stone around them, and we’re an independent service provider, not affiliated with Kohler.
Which Kohler Models This Applies To
Kohler’s kitchen faucet catalog splits into a few families that matter for parts matching. The Bellera and Malleco pull-downs use one sprayer head assembly; the Graze and Cruette semiprofessional lines use a different, taller head and a distinct hose fitting. Artifex and Prospect sinks take specific strainer and disposal-flange sizes, and the Kohler Sensate touchless faucets carry a solenoid and control box under the cabinet that most generic parts won’t replace correctly.
Identify your part three ways before ordering anything: the model number stamped on the faucet body under the deck or on the sink rim, the finish code (Vibrant Stainless and Vibrant Brushed Moderne Brass are separate SKUs), and a measurement of the sprayer head thread if it’s a pull-down. On the sink side, Kohler’s apron-front models are cut for a specific cabinet opening, so a sink swap usually means cabinet modification, not just a drop-in.
On OEM versus aftermarket: for a valve cartridge or a ceramic disc inside a Kohler faucet, we use the Kohler part. Aftermarket cartridges fit the threads but the finish inside the valve body is where the drip returns in 18 months. For a sprayer head or a supply hose, a quality aftermarket equivalent is defensible and saves money. We’ll tell you which side of that line your part falls on rather than defaulting to the pricier one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Kitchen Remodeling Is Failing
Kohler fixtures fail in patterns, and each pattern points at a different part. Here’s what we see in Las Vegas kitchens.
- Drip at the spout that won’t stop. The cartridge or ceramic valve inside the faucet body has worn or scaled up. Las Vegas water runs hard, and the mineral load accelerates cartridge wear compared to softer-water markets.
- Pull-down sprayer won’t retract or hangs loose. The retraction weight or the hose guide under the sink has failed, or the hose itself has cracked at the crimp. A cracked hose is the one that quietly floods a cabinet.
- Touchless faucet activating on its own or not at all. The solenoid or the control box battery pack is failing. On Sensate models this is a component swap, not a whole-faucet replacement.
- Water pooling inside the sink base cabinet. Supply line, drain assembly, or disposal flange seal. This one matters most because the cabinet floor and toe kick swell before you notice the smell.
- Loose or wobbling faucet base. The mounting nut or the deck plate has loosened, or the countertop hole has eroded. On a quartz or granite top, a wobbling base can crack the stone edge over time.
Replacement Cost & What’s Included
Installed pricing for the kitchen work around a Kohler fixture, calibrated to the Las Vegas market:
| Work | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: whether the sink opening has to be recut for a new Kohler model, whether the old countertop survives the swap, and whether electrical has to move for a touchless faucet’s control box. Faucet and sink parts are quoted separately as material, with labor shown as its own line. Every scope and allowance is written before work starts, and any change arrives as a written change order before a nail moves. Every completed kitchen job is backed by our written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do the diagnosis. Shut off the supply valves, pull the cabinet contents, dry the base, and note where the water is coming from. Look up your model number and finish code. Run a paper towel along the supply lines and the drain nut; the wet spot tells you the part.
Where DIY goes wrong: swapping a cartridge on a Kohler faucet without the right puller can score the valve body, and then you’re buying a whole faucet instead of a $30 part. Replacing a sink in an existing stone countertop without supporting the cutout can crack the slab. And anything touching the disposal wiring or a new circuit for a touchless control box belongs with someone licensed. If you’re unsure, call us at (866) 814-4155 and we’ll tell you honestly whether it’s a parts swap or a bigger job. Estimates are free.
FAQs
A Kohler faucet body typically runs 10 to 15 years, but the cartridge inside is the part that goes first, often at 5 to 8 years in Las Vegas because of the hard water and mineral content. Sinks last far longer; it’s the seals, strainers, and disposal flanges around them that fail sooner.
Often yes. A dripping Kohler faucet is usually a cartridge or ceramic valve swap, not a new faucet. A loose sprayer is usually a hose or weight. Full replacement makes sense when the finish is failing, the valve body is scored, or you’re changing the sink footprint anyway. Call (866) 814-4155 for an exact quote.
A faucet or sprayer swap is typically a couple of hours. A sink replacement in an existing countertop runs longer because the cutout and the disposal connection have to be reworked. If the countertop has to come out for a new sink, it’s a multi-day job, and we’ll say so up front rather than discovering it mid-project.
We match by model number and finish code, then order the Kohler part or a quality equivalent depending on which one we’d put in our own kitchen. We don’t carry parts on a truck, so lead time depends on what’s in stock with the supplier. Other brands we also work with include KraftMaid, Cambria, and Silestone.
Ready to price the job?
We’re Barrett & Sons Construction, owner-operated, and every eligible job gets permits pulled and inspections signed. If you’ve got a Kohler fixture that’s failing or a kitchen that needs the cabinetry and stone to match it, call (866) 814-4155 for a free estimate. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.