A Barrett company - serving Las Vegas, NV
M

Mr-Glass Bathroom Remodeling in Las Vegas, NV

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Bathroom Remodeling: The Las Vegas Owner’s Guide

A Mr-Glass bathroom remodeling project in Las Vegas typically runs $9,000 to $28,000 installed, depending on whether you’re refreshing a hall bath or gutting a primary suite. That range covers Mr-Glass enclosure and shower work plus the tile, plumbing trim, vanity, and fixtures around it. We’re an independent bathroom remodeling contractor and we are not affiliated with Mr-Glass; we work with the brand’s systems every week in Clark County homes.

Call (866) 814-4155

Owners usually don’t land on this page by browsing. They land here after a shower door starts dragging on the bottom track, a frameless glass panel shows a hairline crack near a hinge, or the factory sweep on a Mr-Glass enclosure has gone hard and yellow under the Las Vegas sun. You notice it one morning, you push it off for a month, and then the water starts running onto the bathroom floor instead of into the pan.

Key Takeaways

  • Installed Mr-Glass bathroom remodeling in Las Vegas: $9,000 to $28,000 for a full bath, lower for enclosures and shower swaps.
  • Most failures we see are wear parts and seals, not the glass itself, and they’re fixable at any point on the schedule.
  • Water damage behind a leaking enclosure is the real cost. A $60 sweep that drips for two years can turn into a subfloor repair.
  • We pull permits and stand behind the finished job with our written 90-Day Done Right Promise.

Which Mr-Glass Models This Applies To

Mr-Glass builds shower enclosures, tub surrounds, mirrors, and custom glass across several product lines, and the part you need depends on which line is sitting in your bathroom. The tell is almost always a sticker or etched label on the frame or on the door’s top rail – look there first before you touch a tape measure. Note the series name and any model number. If the label is gone, measure the door width, panel height, and glass thickness, and take a photo of the hinge hardware. That photo does more for matching a part than any description you can type.

Here’s the compatibility gotcha worth knowing before you order: Mr-Glass has changed hinge and pivot hardware across product generations, and a sweep or hinge that fits one generation won’t seat on the next. Two enclosures that look identical from three feet away can take different bottom seals. That’s why we match on the label and the hardware photo, not on “it looks like the one at the store.”

OEM versus aftermarket is a real decision. A genuine Mr-Glass replacement seal or hinge drops in without modification but costs more and can take a week or more to arrive. A quality aftermarket equivalent often fits and saves you money, but you’ll occasionally trim to length or drill a new hinge hole. For wear parts like sweeps and seals, aftermarket is usually fine. For structural hardware – hinges, pivots, handles – we lean OEM, because a hinge failure drops a glass door. We don’t stock Mr-Glass parts and we don’t carry them on a truck. We source what your job needs, and we tell you which route we’re taking and why before anything gets ordered.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Bathroom Remodeling Is Failing

  • The door drags or won’t close flush. That’s a worn hinge, a sagging pivot, or a bottom sweep that’s swollen and rubbing. Left alone, the drag stresses the hinge plate until the glass chips at the hole.
  • Water on the bathroom floor after every shower. Almost always a hardened or dislodged sweep or a failed seal at the panel edge. This is the one to fix fast, because water finds the subfloor and the drywall behind the tile.
  • A hairline crack at a hinge or handle hole. Tempered glass doesn’t crack from old age; it cracks where a fastener is over-tightened or the panel is bound and flexing. A cracked panel is a shower you stop using.
  • Cloudy, etched-looking glass that won’t wipe clean. Las Vegas water runs hard, and mineral scale etches into the glass surface over years. Sometimes it’s a cleaning problem. Sometimes it’s a glass replacement, and we’ll tell you which.
  • Loose wall channel or caulk pulling away from the tile. The enclosure is shifting against the wall, and water is getting behind the frame. That’s how a small job turns into tile and backer board repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Las Vegas homeowners, here’s where the money lands. These are installed ranges, parts and labor together:

Job Installed Range
Bathroom remodel (full) $9,000 – $28,000
Shower replacement (enclosure and glass) $3,000 – $8,500
Tub-to-shower conversion $3,500 – $10,000
Walk-in shower installation $4,500 – $12,000
Single part repair (sweep, seal, hinge, handle) Quote by part and access

What moves the number up: frameless versus framed glass, custom panel sizes versus stock, tile repair when the wall channel has failed, and whether we’re opening a wall. What moves it down: a stock Mr-Glass enclosure that drops into an existing opening without tile work. We put every scope item and every allowance in writing before the job starts, and if a price has to change mid-job, you get a written change order before we proceed. Every completed job carries our 90-Day Done Right Promise in writing on the contract.

DIY or Call Us?

Some of this is safe to check yourself. You can look for the label, measure the opening, photograph the hardware, and confirm the shower is leaking at the sweep rather than the tile. Swapping a bottom sweep or a door seal is a reasonable Saturday job if the part matches, and we’ll tell you so instead of talking you into a service call.

Where it goes wrong: anything involving the glass panels or the hinges. A frameless glass door is heavy, awkward, and under load at the hinges, and tempered glass that gets dropped, tipped, or over-tightened shatters into pieces. Two people who know how to set it, plus the right hardware, is worth the call. And if you’re seeing water damage behind the wall, that’s not a parts job at all – that’s a repair that needs to be looked at before it spreads. When you’re not sure, call us at (866) 814-4155 and we’ll walk you through what you’re looking at.

FAQs

How long does a Mr-Glass shower enclosure or glass panel last in Las Vegas?

A well-installed enclosure will go 15 to 20 years on the glass, but the moving parts and seals usually need attention well before that. The Las Vegas sun and our hard water break down rubber sweeps and silicone faster than mild climates, so budget on replacing wear parts every few years.

Can a failing Mr-Glass part be repaired instead of replaced?

Often, yes. Sweeps, seals, hinges, handles, and wall channels are replaceable, and that’s cheaper than a new enclosure. If the glass itself is cracked or badly etched, replacement is the answer, because tempered glass can’t be repaired. Call (866) 814-4155 for a free estimate and we’ll tell you honestly which one you’re facing.

How long does the swap take?

A single part repair, like a sweep or a hinge set, is usually a couple of hours. A full shower replacement or a bathroom remodel takes a matter of days depending on tile and scope. Estimates are free, and you’ll get a clear written schedule before we start.

How do you source the right Mr-Glass part?

We match on the series label and a photo of the hardware, then order OEM or a quality aftermarket equivalent depending on the part and your budget. We don’t keep Mr-Glass parts in stock or on a truck – we order what your job needs. The estimate covers the part and the labor, in writing.

Ready to price it? Barrett & Sons Construction Las Vegas pulls permits and inspections on every eligible job, and our crew members are background-checked and uniformed on every visit. We also service KraftMaid, Cambria, and Silestone work if your bathroom project touches cabinetry or stone. A live person answers the phone around the clock. Call (866) 814-4155 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch