A Barrett company - serving Las Vegas, NV
M

Mr-Glass Construction Service in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Las Vegas Homeowners Choose Mr-Glass Construction

We install and service Mr-Glass frameless shower enclosures, mirror walls, and glass railings across the Las Vegas Valley as an independent contractor, and we know how the brand’s hardware behaves in our hard water and desert heat. Our technicians have up to 28 years of experience, and every eligible job comes with permits pulled, inspections signed, and our written 90-Day Done Right Promise.

Call (866) 814-4155

Mr-Glass earns its place in Las Vegas bathrooms for a simple reason: frameless glass opens up a small shower and makes a dark vanity feel twice as large. The brand’s Serenity, Reflections, Elite, and Custom Series all hold up well when the installation is right and the maintenance is honest. That second part is where a lot of Las Vegas homeowners get let down, because our water is hard and our summers are brutal on seals. We tell you upfront: Barrett & Sons Construction Las Vegas is an independent Mr-Glass service provider. We are not affiliated with or authorized by Mr-Glass, and we never pretend otherwise. We stand behind our own workmanship and the manufacturer’s product warranty. Call (866) 814-4155 and a live person answers, day or night.

Why Trust Barrett & Sons Construction Las Vegas for Your Mr-Glass Construction?

We’re owner-operated, founded in 1998, and the owner’s sons run the crews. That matters for a Mr-Glass job because glass work lives or dies on the details nobody sees once the door is hung: solid blocking behind the hinges, a level curb, an anchor that bites into a stud instead of drywall. Our crew members are background-checked and carry the Barrett & Sons name. When a Mr-Glass Serenity enclosure leans or a Reflections mirror starts to cloud, somebody who answers to Tom Barrett is going to hear about it.

We use Mr-Glass OEM-compatible parts for hinges, sweeps, seals, and handles wherever they’re available, because fit and warranty compliance depend on them. The bar for the work is the permit inspector, who works for you, not for us. Every scope change shows up as a written change order before the work moves – no surprise invoice when the door comes off the wall. Tom publishes his name, his address, and his license number, so you can look it up before you sign anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Mr-Glass Construction Problems We Fix in Las Vegas

A Las Vegas shower enclosure lives in one of the harshest climates in the country for glass. The desert sun and the hard water each do their own damage. Here’s what we run into most.

  • Hard-water etching on Mr-Glass Serenity glass. Las Vegas water is high in calcium and magnesium, and it leaves a chalky white film that most people assume is dirt. It isn’t. Left unsealed, that mineral haze bonds to the glass and becomes permanent. The fix is a proper polish and seal before the etch sets, not a stronger spray.
  • Urethane sweep and seal failure on Custom Series doors. The sweep along the bottom of a frameless door hardens in our heat and eventually tears. Water pools on the bathroom floor and starts working into the threshold and subfloor. In a home that sits empty for the summer, that leak can go weeks before anyone notices it.
  • Hinge and bracket loosening on Serenity enclosures. This almost always traces back to the install, not the hardware. If the anchors were set into drywall or backer board instead of solid blocking or studs, the door sags and the glass starts to pull. We open up the wall and re-anchor into framing.
  • Mirror desilvering on Reflections walls and vanity mirrors. The silvering along the bottom edge of a mirror oxidizes in a humid bathroom, particularly where cleaning sprays have run behind the glass. It shows as a dark, blotchy line that spreads upward and can’t be polished out.
  • Elite Series railing corrosion at the base shoe. Outdoor railings take the UV and the temperature swings between day and night. Pool water and sprinkler overspray get at the base fasteners and the finish, and the hardware loosens over time. We check the mounting and replace corroded hardware before it becomes a safety issue.

Mr-Glass Parts & Our Repair-vs-Replace Approach

Parts matter more than most people expect. We use Mr-Glass OEM replacement parts – hinges, sweeps, seals, handles – whenever they’re available, because a genuine hinge fits the predrilled holes and keeps the warranty clean. When Mr-Glass has discontinued a piece of hardware, we source aftermarket equivalents that meet the same load and corrosion specs, and we tell you which is which. We don’t claim to stock parts locally; we confirm the part on the quote and order to the job.

The repair-versus-replace call is where we try to be honest rather than convenient. If a panel is chipped on the edge, etched past the point where polishing helps, or the whole enclosure is undersized for the opening, we’ll tell you a repair will fail again and recommend a replacement. If a new sweep and a hinge adjustment will get you another decade, that’s what we’ll quote. A lot of Mr-Glass calls in Las Vegas start with water pooling at the base of a frameless door and a haze that no longer wipes away – usually a hardened sweep and hard-water calcium, fixed with a new seal, hinge adjustment, and a glass polish. Call (866) 814-4155 for a free estimate and we’ll tell you which side of that line you’re on.

Our Mr-Glass Service Process – Step by Step

  1. 1
    Diagnosis. We measure the opening, check that the enclosure was anchored into solid blocking, and test the door for sag and the sweep for hardening. We look at the glass for etch depth and the mirror for edge oxidation.
  2. 2
    Repair or install. On a repair, we replace the OEM-compatible sweep, seals, and hardware and re-anchor as needed. On an installation, we set the Custom or Serenity panel to the actual opening, not the nominal spec, and we plan it around your tile schedule so nothing gets chipped on the way in.
  3. 3
    Test. We open and close the door through its full swing, run water, and check the sill and floor for any weep. A frameless door that leaks wasn’t tested.
  4. 4
    Warranty and handoff. We leave you the part numbers, the maintenance routine for the glass, and the camera-ready paperwork for the manufacturer’s product warranty. Our own work is backed by the 90-Day Done Right Promise – if it’s not right, one call brings Tom back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mr-Glass Products We Service & Install in Las Vegas

We work across the full Mr-Glass residential line. The Serenity Series covers frameless shower enclosures in 3/8″ and 1/2″ glass with headerless or minimal-header setups. The Custom Series covers made-to-measure shower doors and fixed panels – neo-angle, inline, and return-panel layouts for the odd-shaped Las Vegas bathrooms you find in older Paradise Palms and Huntridge homes. The Reflections Series covers mirror walls and vanity mirrors in beveled and polished-edge profiles. The Elite Series covers glass railing systems in base-shoe and spigot-mount. We install and service all of them.

We Also Service These Brands

Mr-Glass is one part of the work we do. We also install and service KraftMaid and Cambria in kitchens, Silestone countertops, and Kohler fixtures and shower systems. If your bathroom remodel is pulling a Mr-Glass enclosure together with a new Kohler valve and a Cambria vanity top, one crew handles the whole scope instead of three that blame each other. That’s a big part of why customers call us back.

FAQs – Mr-Glass Construction Service in Las Vegas

Is Barrett & Sons Construction Las Vegas authorized by Mr-Glass? No. We’re an independent Mr-Glass service provider, not affiliated with or authorized by Mr-Glass. We install and service the products and stand behind our own workmanship and the manufacturer’s product warranty.

Do you use genuine Mr-Glass or OEM parts? Yes, we use Mr-Glass OEM replacement parts – hinges, sweeps, seals, and handles – whenever they’re available. If a part is discontinued, we source aftermarket equivalents that meet the same load and corrosion specs and tell you exactly what we’re installing.

How long does Mr-Glass service take? A sweep and seal replacement on a frameless shower door is a short visit, often under an hour. A full enclosure or mirror-wall install typically takes most of a day and depends on the opening and the tile. We give you the timeline on the written quote so there are no surprises.

What Mr-Glass models and series do you cover? We cover the Serenity Series frameless enclosures, the Reflections Series mirror walls and vanity mirrors, the Elite Series glass railings, and the Custom Series made-to-measure shower doors and fixed panels. If it’s a Mr-Glass residential product in Las Vegas, we can usually service it.

Will service void my Mr-Glass warranty? Not when it’s done correctly. Using OEM-compatible parts and proper anchoring keeps the product warranty intact. We give you the paperwork you need and note what we replaced so a warranty claim stays clean. If a repair would put the warranty at risk, we’ll say so before we start.

How much does Mr-Glass construction cost in Las Vegas? It depends on the scope. A walk-in shower installation runs $4500 – $12000, a tub-to-shower conversion $3500 – $10000, a full bathroom remodel $9000 – $28000, and a vanity installation $800 – $3000. Call (866) 814-4155 for an exact quote – estimates are free, and the second opinion on any written estimate is free too.

Mr-Glass / Bathroom Service Typical Las Vegas Range
Walk-In Shower Installation $4500 – $12000
Tub-to-Shower Conversion $3500 – $10000
Bathroom Remodel $9000 – $28000
Bathroom Vanity Installation $800 – $3000

Book Your Mr-Glass Service in Las Vegas, NV

Whether you need a sweeps-and-seals repair on a Serenity door or a full Custom Series enclosure in a bathroom remodel, we’ll give you a clear scope, OEM-compatible parts, and a written price before the work starts. Call Barrett & Sons Construction Las Vegas at (866) 814-4155 for a free estimate. A live person answers 24/7, and we publish the license so you can check it yourself.

Written by the team at Barrett & Sons Construction Las Vegas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch