Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Home Additions & ADU: The Las Vegas Owner’s Guide
We build and finish Oldcastle-compatible home additions and ADUs in Las Vegas, with most addition projects landing between $45,000 and $130,000 installed and detached or attached ADUs running $90,000 to $220,000. That’s the full build – foundation, framing, envelope, utility tie-ins, finishes – not a parts swap. If you own an Oldcastle addition, ADU or structural shell and something in it is failing, this guide covers what typically fails, what replacement or repair costs in the Las Vegas market, and what we need to match the right part to your system.
Owners usually find out the hard way. A door in the addition starts dragging in July. A wall assembly that was tight the first summer now whistles under the vent. Half a dozen things announce themselves at once because additions and ADUs are systems, and when one part of the envelope goes, the ones around it take the strain.
Key Takeaways
- Additions in Las Vegas: $45,000 to $130,000 installed. ADUs: $90,000 to $220,000.
- Oldcastle-compatible parts are matched by series and model plate – guessing gets expensive fast.
- Desert heat and monsoon season beat on addition envelopes harder than most of the country, so premature failures are common and fixable.
- We pull permits and sign inspections on every eligible job. Structural work doesn’t skip the inspector.
- Written change orders before any scope change. No surprise invoices.
Which Oldcastle Models This Applies To
Oldcastle’s addition and ADU lines span several series types – modular shells, panelized wall systems and entry assemblies – and the part you need is tied to the series and to the plate or label on the assembly itself, not to the year the addition went up. Before you order anything, find the identification tag. On most Oldcastle assemblies it’s on the interior face of the unit frame or in the panel joint on the unit’s hinge side. Copy the series letter and the model number exactly as printed. One wrong character puts you in a different size class.
The part that most often gets mismatched is the door assembly and its threshold. Oldcastle series within the same nominal width can differ in frame depth and sill height by a quarter inch or more. In an addition built on a slab – the standard in most Las Vegas subdivisions – a quarter inch at the threshold means a door that leaks dust or water at the base. Measure the rough opening width and height, then compare it to the OEM spec for your exact model. If the OEM part is on backorder, quality aftermarket equivalents from established manufacturers are usually interchangeable, but only after you’ve verified the dimensional spec. We don’t carry parts on a truck and we don’t stock Oldcastle parts locally. We source the correct part to your model and install it.
One note on who we are: Barrett & Sons Construction Las Vegas is an independent contractor. We are not affiliated with Oldcastle, not a dealer and not an authorized service center. We work on the assemblies and we match parts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Home Additions & ADU Is Failing
- Door assemblies drag or stick. In Las Vegas the thermal expansion cycle is brutal – the addition frame swells in July and contracts in January. A door that drags in summer and swings free in winter usually points to frame movement, not a failing hinge. Sometimes both.
- Gaps at the addition-to-house transition. The joint where the addition meets the original structure is the weakest seam. Gaps that grow from a hairline to a quarter inch mean the weather seal or flashing has given up. That’s a water-intrusion path in monsoon season.
- Water staining or soft spots along the base of walls. In Las Vegas, an addition on a slab with a failed threshold lets water in during summer storms. Staining at the baseboard or a soft spot in the drywall face usually means the sill or flashing is the problem.
- Window or panel frames out of square. If a panel frame or window unit has shifted out of square by more than about an eighth inch over its length, the wall assembly is moving. That’s a structural question, not a parts question, and it needs eyes on it.
- Drafts or audible air movement at wall seams. Air moving through a seam that felt tight last year means gaskets, sealant or panel splines have failed. Desert temperature swings harden and crack these faster than in milder climates.
Replacement Cost & What’s Included
Here’s what the numbers look like for Las Vegas. These are installed ranges – labor, permit where required, parts, done.
| Work | Installed Range |
|---|---|
| Home Addition (full build) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion (ADU path) | $30,000 – $80,000 |
| Door assembly replacement (addition exterior) | $800 – $2,400 |
| Threshold / sill replacement | $350 – $900 |
| Transition flashing and weather seal repair | $400 – $1,200 |
What drives the range: the size and complexity of the assembly, whether the frame is still square, whether the permit is required for the repair, and whether we’re replacing one part or a group of parts that failed together. A single threshold is a few hundred dollars. A door assembly plus threshold plus transition flashing is a morning’s work. We quote it in writing, line by line, before anything gets ordered. Every completed repair is backed by our 90-Day Done Right Promise in writing. If we got it wrong, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely do: locate and photograph the model plate, verify the series and model number, measure the rough opening, and document the symptom with photos. That’s the work that goes into quoting the part.
Where DIY goes wrong on these assemblies: anything that involves moving the structural frame, replacing a threshold that’s set under a load-bearing wall, or resealing a transition joint. A door threshold looks like a simple swap. It isn’t. The threshold is the water and air seal at the bottom of an exterior wall, and getting it wrong means moisture intrusion into the addition floor system – expensive to fix later. If your panel frame is out of square or the addition-to-house joint is opening, that’s not a parts project. That’s a structural inspection. We don’t do that work ourselves without looking at it first in person.
If you’re unsure which category your issue falls into, call (866) 814-4155 and describe what you’re seeing. We’ll tell you honestly whether it’s a part, a repair, or a structural call. That call is free, and so is a second opinion on any written estimate you’ve already been handed.
FAQs
A properly installed assembly with intact seals and flashing should hold up well past 15 years in Las Vegas. The parts that go first are door thresholds, transition flashing and gasket material – not because they’re weak, but because desert temperature swing and UV exposure break down sealant and flexible gasket rubber faster than in mild climates. Inspect seals at the addition-to-house joint every spring before the heat sets in.
Usually yes, if the frame is still square. A failed threshold or weather seal is often a repair rather than a full assembly replacement, and that’s the cheaper call. If the door assembly frame itself has warped or the panel has gone out of square, replacement is the right answer. We won’t replace a part that can be repaired, and we won’t repair a part that’s already past saving. Call (866) 814-4155 for a free estimate and we’ll tell you which one it is.
A threshold or exterior door assembly replacement is typically a half-day to a full day on site. Transition flashing and seal repair is usually done in a few hours. If a permit is required for the repair – and in some cases in the Las Vegas valley it is – add inspection scheduling time. We pull every permit on every eligible job and get the inspector to sign off before we call the job done.
We match from the model plate on the assembly itself, not from what year the addition was built. You send us a photo of the tag and the measurements of the rough opening, and we source the part or its verified dimensional equivalent. If the OEM part is unavailable, we tell you what the equivalent is and why it fits. No mystery brand off a van – you’ll know exactly what’s going in. We install KraftMaid, Cambria and Silestone in finish work across additions, so if the project touches cabinetry or counters, that’s covered in the same scope. Call (866) 814-4155 to start with a free estimate.
Get a Free Estimate on Your Oldcastle Addition or ADU
If something in your Oldcastle addition or ADU in Las Vegas is failing, the next step is a photo of the model plate and a call. Barrett & Sons Construction has technicians with up to 28 years of experience, and we’ve been doing this work locally for a long time – more than 29 years since 1998. We pull every permit on every eligible job, put every change order in writing before we move a nail, and back every finished job with our written 90-Day Done Right Promise. A live person answers the phone. Call (866) 814-4155 to schedule your free estimate. We’ll tell you what the part is, what it costs, and when we can get it done.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.