A Barrett company - serving Las Vegas, NV

Owens Corning Home Additions & ADU in Las Vegas, NV

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Home Additions & ADU: The Las Vegas Owner’s Guide

We build Owens Corning home additions and ADUs in Las Vegas, and the honest answer for most owners is $45,000 – $130,000 for a framed addition and $90,000 – $220,000 for a full ADU, permitted and inspected, with a written line-item quote before anything is ordered. This isn’t same-day work, and anyone who tells you it is hasn’t pulled a permit in Clark County. The Owens Corning connection is the building envelope: their foam sheathing, weather barrier, and blown or batt insulation are what make a Las Vegas addition stand up to 115-degree summers and monsoon-driven rain without the walls sweating themselves apart.

Call (866) 814-4155

Owners usually end up on this page one of two ways. Either they’re planning the addition and want the envelope done with materials they can look up, or they’ve already got an Owens Corning assembly in an older room and something is failing underneath – soft drywall near a window, a foam board pulling away from the studs, cold spots along an exterior wall that didn’t used to be there. Both are envelope problems, and both start with identifying what was installed.

Key Takeaways

  • Installed Owens Corning home additions in Las Vegas run $45,000 – $130,000; ADUs run $90,000 – $220,000.
  • Owens Corning is the envelope brand here – foam sheathing, weather barrier, insulation – not the whole system.
  • Clark County permits and inspections are required on every addition and ADU we build, no exceptions.
  • We’re an independent contractor working with Owens Corning products; we’re not affiliated with Owens Corning.
  • Every price change is a written change order before work continues.

Which Owens Corning Models This Applies To

Owens Corning doesn’t make the lumber, the electrical, or the plumbing in your addition – they make what wraps, seals, and insulates it. That means the “models” you’re matching against are product families, not serial-numbered machines. Here’s how to tell what you’re working with.

Look at the exposed layer on the outside of the studs under your siding. If you see a foil- or white-faced rigid board, that’s Owens Corning Foamular, most commonly the NGX or the older XPS line, sold in 1″, 1.5″, 2″, and 2.5″ thicknesses with an R-value of roughly 5 per inch. If the facing is a black-and-white printed sheet stapled over the studs, that’s likely the WeatherLock or a similar weather-resistant barrier. Rolled or blown insulation tells you the batt series – the R-13 and R-15 kraft-faced batts and the R-30 to R-60 blown attic product are the usual suspects in Las Vegas homes.

Here’s the compatibility gotcha most homeowners miss: Foamular NGX carries an R-value rated at a specific thickness, and if someone before you installed 1″ board where the plans called for 2″, you’re short roughly 5 R-value points on that wall. That gap shows up as condensation on the drywall in August. Check the printed R-value on the board face if it’s visible, and measure thickness with a tape.

On the OEM-versus-aftermarket question: for foam and batt insulation, Owens Corning’s own product is what we specify because the R-value and the labeling are what the inspector checks. For fasteners, tapes, and sealants, a quality aftermarket equivalent is fine and often what we use – the building code cares about the assembly, not the label on the tape. We install Owens Corning products but we are an independent Las Vegas contractor, not affiliated with Owens Corning. We’ll also source KraftMaid, Cambria, and Silestone for the finished rooms inside the addition when you’re ready to talk interiors.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Home Additions & ADU Is Failing

An envelope failure announces itself quietly at first. These are the five we see most in Las Vegas homes, and what each one usually means.

  • Soft or bubbling drywall on an exterior wall. Moisture is getting past the weather barrier or the foam board’s taped seams. In Las Vegas, wind-driven rain during monsoon season finds the gaps a dry-season install left behind.
  • Cold spots or hot spots along one wall in an otherwise comfortable room. Insulation has settled, compressed, or was never installed to full depth. A thermal scan or a careful probe finds where the R-value dropped off.
  • Foam sheathing separating from the studs. The adhesive or fasteners failed. This is more common on south- and west-facing walls where surface temps climb well past 150 degrees in summer.
  • Condensation on interior walls or window frames during summer. The dew point is landing on the wrong side of the assembly – usually an R-value mismatch or a missing vapor-control layer.
  • Rising cooling bills with no equipment change. Air is escaping through envelope gaps. Duct leakage and envelope leakage look the same on the bill until you test for both.

One thing about Las Vegas weather that catches out-of-town contractors: our dry heat is easy on some materials and brutal on others. UV exposure degrades foam board that’s left uncovered even for a few weeks, and a wall that performs fine in a humid climate can fail here because we get the heat without the moisture, and the materials were spec’d for the wrong problem.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Whole-addition and ADU pricing in Las Vegas ranges from $45,000 to $130,000 for a framed addition and $90,000 to $220,000 for an ADU. For an envelope repair or re-insulation on an existing Owens Corning assembly, we don’t publish a flat rate because the scope varies too much – call us and we’ll quote it in writing.

What drives the range on a full build:

  • Square footage and foundation type. A slab addition is simpler than a raised or crawlspace build.
  • Envelope spec. Foam thickness, batt R-value, and weather barrier grade all move the number.
  • Roof tie-in. How the addition meets the existing roof determines a real chunk of framing cost.
  • Permits and inspections. Clark County pulls and inspection fees are part of every quote, and so are the inspections themselves.
  • Finishes inside. Cabinetry, counters, and flooring are the swing factor – we line-item every allowance so you see it.

Parts and labor are broken out separately on the quote. Every price change is a written change order before work proceeds – no surprise invoices at the end. Every completed job is backed by the written 90-Day Done Right Promise: if it’s not right, Tom comes back and makes it right on one call.

DIY or Call Us?

There’s a safe middle ground and a dangerous edge on this work. You can absolutely check a few things yourself: measure the foam board thickness on an exposed wall, look for gaps in the weather barrier at corners and penetrations, and note where you feel temperature swings. That’s useful information to have on hand when you call.

What you shouldn’t do is open up a finished wall to “see what’s in there” without a plan, or try to re-seal a weather barrier from the outside while it’s still serving as your moisture control layer – one wrong tape seam and you’ve moved the water problem somewhere you can’t see it. The bigger issue is what happens after: if you cut into the envelope, you’re now responsible for re-sealing it to code, and if the inspector asks for a permit and there isn’t one, you’re the one explaining it. That’s not a scare tactic, it’s just how Clark County works.

The honest split is this: let us look at it before you open it up. Estimates are free, and we’ll tell you whether it’s a small fix or a real envelope problem. Call (866) 814-4155 to schedule yours. We’re a Las Vegas contractor – we live here and we’ll see you at the hardware store.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch