Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Las Vegas Owner’s Guide
Owens Corning kitchen remodeling in Las Vegas typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and finish choices. We install Owens Corning-compatible kitchen systems across the Las Vegas valley, and every eligible job includes permits pulled and inspections signed before we call it done. Most Las Vegas owners discover this part of the job needs attention in one of two ways: they’re planning a full remodel and a contractor asks about insulation behind the cabinets, or they’ve already been through one bad remodel and want to know what went in the wall. Either way, the kitchen is the room where the details behind the drywall matter as much as the ones you can see.
Which Owens Corning Models This Applies To
Owens Corning makes several product lines that show up in kitchen remodeling: fiberglass batt insulation for wall cavities, extruded polystyrene foam board for exterior walls, and foil-faced polyiso rigid panels often used against masonry or block construction. The label on the factory packaging is the fastest way to identify what you have. Batts are printed with an R-value and a face color that shifts depending on series; foam board carries a thickness marking and a compressive strength figure stamped on the edge. If the label is gone, measure thickness with a tape and compare against the standard R-values for Las Vegas wall assemblies.
The OEM-versus-aftermarket question is real here. Owens Corning batts and foam boards are widely copied, and the numbers on the box don’t always match what’s actually inside. We specify the genuine Owens Corning brand name on the scope and the change order so you can look it up yourself. If a substitute is on the table, it arrives in writing before any material moves. That’s the same rule we apply with KraftMaid cabinets, Cambria countertops, and Silestone surfaces elsewhere on the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
Las Vegas heat is hard on insulation and wall assemblies. Here’s what we look for in the field.
- Drafts near the exterior wall behind cabinets. Faced batts that have separated from the studs or lost their kraft or foil facing let hot air pull straight through. That’s a sign the vapor barrier was never taped or stapled tight during the original build.
- Condensation or staining on kitchen walls after the AC kicks on. Foil-faced rigid panels installed face-out in a hot-dry climate can trap moisture against masonry. You’ll see a shadow line or a cold spot on the wall long before a full failure.
- Batt sagging above the upper cabinets. Owens Corning batts stapled at the edges rather than the face tend to pull down over the course of a Las Vegas summer. A gap of even an inch changes the wall’s R-value in the real world.
- Higher summer electric bills without a rate change. The kitchen wall is one of the smallest wall runs in most Las Vegas homes, but a failed batt there shows up in the energy bill because the wall is directly behind the range and fridge.
- Visible cracking or crumbling of foam board edges. Extruded polystyrene installed against a garage-side kitchen wall is exposed to more heat than the rest of the home. Edges that have been cut or broken lose compressive strength and no longer do their job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed kitchen remodeling in Las Vegas with Owens Corning-spec insulation falls in the $14,000 to $45,000 range. Here’s how that breaks down for a kitchen job that involves opening the wall around the cabinets.
| Scope | Installed Range |
|---|---|
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (asbestos-safe wall work, insulation, finishes) | $14,000 – $45,000 |
The range moves based on how much wall gets opened, whether the exterior wall behind the range is masonry or frame, and whether the countertop is Cambria versus a laminate. Everything is priced in writing before work starts. Every price change comes as a written change order. Every job is backed by our 90-Day Done Right Promise, and the crew members who show up are background-checked and carry the Barrett & Sons name. Call (866) 814-4155 for a free written estimate.
DIY or Call Us?
Some of this you can check yourself. Walk along the base of the exterior kitchen wall and feel for cool air with the AC on. Look up above the upper cabinets for sagging batts or crumbled foam edges. Confirm the R-value on the label if it’s still there. Those three checks are safe and tell you what you’re dealing with.
Where homeowners get into trouble is reinstalling faced batts against a masonry exterior wall in a hot-dry climate. That’s the step where foil orientation, taping, and the gap behind the cabinet all have to be right, and a mistake there is a moisture problem you won’t see until the next monsoon season. Foil-faced polyiso against a block wall in Las Vegas also requires careful detailing, and if a permit was pulled on the original job, pulling one on the repair is what gets an inspector to sign off on the fix. We’re an independent service provider and not affiliated with Owens Corning, but the scope we write specifies the real Owens Corning product by name. Call (866) 814-4155 to talk through your kitchen.
FAQs
Fiberglass batts and foam board, correctly installed and left alone, are expected to last the life of the wall assembly, which in a Las Vegas home typically means 30 years or more. What shortens that in Las Vegas is installation error, not the material itself. Batt sag, broken foam edges, and untaped joints are what bring us back to a kitchen wall in the first ten years, not the Owens Corning brand. Call (866) 814-4155 if you’re seeing drafts after the AC runs.
Often yes, if the batt or foam board is intact and just poorly installed. A batt that’s pulled away at one edge can usually be re-stapled and taped. A foam panel with a small crack at the corner is sometimes re-faced. What we can’t repair honestly is material that’s water-stained, compressed, or has lost its facing on the wall side, because the R-value is already gone even though it looks fine. The free second opinion on any written estimate is the fastest way to know which side of that line you’re on. Call (866) 814-4155.
If the kitchen wall is opened to the studs and back to finish, plan on three to five working days for the insulation and wall work, and two to four weeks for the full kitchen once cabinets and countertops are in the schedule. We don’t promise same-day here because nobody remodels a kitchen same-day, and telling you otherwise would just cost you trust. The scope, the material, and the timeline all arrive in writing before the first day. Call (866) 814-4155 for a free estimate.
We buy the Owens Corning product specified on your scope from building material suppliers and confirm the R-value, facing type, and thickness against your kitchen’s wall assembly before it’s installed. If a substitute is offered because the specified item is backordered, you hear about it as a written change order before anything else happens. No mystery brand shows up on the job under the Owens Corning name, and no change happens without your signature. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.