Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Las Vegas Owner’s Guide
If you have a PGT product and the pavers or driveway section around it is failing, we install and repair PGT-compatible driveway and paver systems in Las Vegas. Installed paver driveways here run $7,000 – $18,000, concrete driveways $4,500 – $12,000, and paver patios $3,500 – $11,000, with written line-item quotes and permits pulled where the job needs them. We’re an independent contractor, not affiliated with PGT, and we quote from what we measure on site, not from a phone guess.
Owners usually spot the problem after a monsoon, not before. A slab edge lifts a half inch near the garage apron. Paver joints that held tight through June sand away in one August storm. Or a driveway that drained fine for a decade suddenly puddles against the PGT threshold, and that’s when the water starts working its way toward the wall.
- Quick answer: PGT-compatible paver and driveway work in Las Vegas runs $7,000 – $18,000 installed for a paver driveway, $4,500 – $12,000 for concrete.
- What fails first: the base and the joints, not the pavers. Las Vegas caliche shifts and summer heat moves both.
- Get a written scope before anyone breaks ground, and check whether permits are required for a driveway approach change.
Which PGT Models This Applies To
PGT makes windows and doors, and the driveway and paver work you’re searching for lives at the boundary where those openings meet the ground: the threshold, apron, patio slab, and the first few feet of paving weeps water away from. So “PGT driveway and pavers” isn’t one replacement part. It’s a system of surfaces tied to a PGT opening, and the compatibility question is about the opening, not the paving material.
How to identify what you have: look for the PGT label etched or stickered on the frame or the glass edge, usually with a series code, model number, and size. That tells us the rough opening dimensions and the sill height. It matters because the paving detail at the foot of a PGT door or window has to sit at the right elevation or the unit takes on water. Getting it wrong is the most common compatibility gotcha we see: a paver installed an inch high at the threshold looks fine until the first rain drives water under the door, and then a PGT unit that was never the problem starts to leak.
On OEM versus aftermarket: for pavers yourself, the material choice is yours to make. For anything that ties into the PGT opening itself – sill pans, flashing, thresholds – we recommend sticking with components that match the PGT unit’s original design, or choosing an equivalent with published specs you can verify. A mystery part off a van, in a size nobody wrote down, is the kind of thing that fails a year later. We don’t stock parts or carry them on a truck. We source what the job needs after we measure it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
- Settling at the threshold. The paving drops a fraction at the foot of a PGT door, letting water pool hard against the sill. In Las Vegas this is typically base failure, not the paver itself – caliche swells and shrinks, and a thin base gives way under it.
- Sand washing out of the joints. Every monsoon season pulls joint sand with it, and after a few passes the pavers start to shift against each other. That’s a joint maintenance problem, and if the sand has been gone for a while, it’s a base problem too.
- Heaving or lipping. One paver edge stands proud of its neighbor, usually a half inch or so. Under the Las Vegas sun a locked-in paver expands until the joint gives, and a lifted edge becomes a trip point in the yard.
- Hairline cracks running through slabs. Cracks that follow straight lines are usually base or drainage, not wear. If a slab at your PGT opening cracks, water finds it and the opening is next.
- Ponding that wasn’t there last year. Water that sits in the same low spot after rain means the slope toward the drain has flattened. That’s a hidden cost nobody sees until it’s under the door.
Replacement Cost & What’s Included
Here’s what the work actually runs in Las Vegas, with the ranges we quote from:
| Job | Typical installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves the number up: the length of the run, how much old paving has to come out, whether the base has to be excavated and re-compacted, and drainage work. On a short run with a sound base, you’re near the bottom of the range. On a long driveway with a failed base, you’re near the top.
Our quotes are line by line, parts and labor separated, so you can see what the paving costs, what the base costs, and what the drainage detail costs. Prices don’t change once work starts, and any scope change arrives as a written change order before we touch the job.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check yourself, honestly. Walk the paving with a level to see the slope. Rake a little joint sand from a bad section and look underneath to see if the base is still compacted or has gone soft. Read the PGT label on the frame and write down the model and size, because any honest quote starts with that number.
Where DIY goes wrong: excavating a base that’s failed and re-compacting it to depth is a different job from laying pavers on top of what’s already there. That’s the mistake we see most, and it costs more later than doing it once. And any paving that ties into a PGT threshold needs the elevation right – get it wrong and a perfectly good window or door starts taking water. If the slope can’t drain away from the house, stop, because it’s a drainage fix, not a paving fix.
For an exact quote and a written scope, call (866) 814-4155. Estimates are free, and a live person answers.
FAQs
Good pavers last 20 to 30 years or more here, but the base and joints under them decide whether you actually get that. Las Vegas heat and caliche soil are hard on both, and a driveway sealed every few years holds up markedly better than one that’s never been sealed.
Often yes, if the base and the elevation at the opening are still sound. Re-sanding joints and resealing can add years to a driveway that’s only drifted. If a section has heaved or the base has failed underneath, patching it just moves the problem.
A paver driveway replacement typically takes a few days, depending on the length of the run and how much old paving and base has to come out. We tell you the timetable in the quote, before the job starts.
We measure first, identify the PGT model from the label on the frame, and source the components the job calls for. We don’t stock parts and we don’t carry them on a truck – if a threshold or sill piece is needed, we get the right one for your unit rather than forcing a near fit.
Talk to Us About Your PGT Driveway & Pavers
If the paving at your PGT opening has started to move, water pools where it didn’t use to, or a threshold looks like it’s taking on moisture, the fix is a written scope and an honest measurement, not another phone quote. Call (866) 814-4155 for a free estimate and a line-item quote in writing. Insured and bonded, permits pulled where the job needs them, and the 90-Day Done Right Promise on the work.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.