Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Las Vegas Owner’s Guide
Schluter kitchen remodeling in Las Vegas runs $14,000 – $45,000 installed, and the price depends mostly on square footage, tile layout, and how the waterproofing assemblies are rebuilt. If you’re reading this because a Schluter system under your counter, backsplash, or floor has started to fail, you’re in the right place. Most Las Vegas homeowners discover the problem the same way: a hairline crack along a tile seam, a hollow thud when they tap near the sink, or a faint discoloration creeping up from the floor where the toe kick meets tile. Sometimes it’s mold showing at a grout line after a slow leak under the kitchen sink. The Schluter detail you trusted failed, and now you’re trying to figure out which system you have, what replacement looks like, and what it actually costs in Las Vegas.
We’re an independent installer. Barrett & Sons Construction Las Vegas is not affiliated with Schluter; we work with the brand’s products because they’re quality assemblies we can stand behind, same as KraftMaid, Cambria, and Silestone. Everything below is written so you can price the job honestly before anyone walks through your door.
Which Schluter Models This Applies To
Schluter isn’t one system – it’s a family of tile and waterproofing assemblies, and knowing which one is under your kitchen determines the pricing and the repair approach. The most common in Las Vegas kitchens are KERDI-BOARD (foam tile backer board), KERDI (sheet waterproofing membrane), DITRA and DITRA-HEAT (uncoupling and heated floor membranes), KERDI-LINE (linear drains, mostly in powder rooms or wet kitchens), and SCHIENE / JOLLY (edge trim profiles). Each has a different failure mode and a different replacement path.
To identify yours, check three spots. First, look at any exposed edge behind a cabinet drawer or under a baseboard – DITRA shows a dovetail grid pattern on its fleece side; KERDI-BOARD is a rigid foam core with a fiberglass mesh facing. Second, measure the tile assembly thickness at a doorway transition: DITRA is about 1/8-inch built up; DITRA-HEAT with the thermostat wire runs about 5/16-inch. Third, flip open the kitchen sink cabinet and look at the subfloor edge – KERDI sheet is a matte orange fleece; KERDI-BOARD is a straight foam panel, often labeled with a printed logo along the factory edge.
OEM versus aftermarket is a real decision here. Schluter’s own profiles, membranes, and drains are engineered as one family – mixing an off-brand membrane with a Schluter edge trim can void the assembly’s published waterproofing rating and, more practically, cause cracking at the joint within a year in our desert heat swings. For Schluter, we install genuine components. Where a homeowner has a partial system from a prior install and wants to match, we identify the exact series before quoting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
These are the symptoms we see most in Las Vegas kitchens, each tied to the underlying cause so you know what you’re looking at.
- Hollow tap-tap under the sink or at the toe kick. Usually means the KERDI membrane lost its thinset bond during a slab settling cycle or a slow sink leak – common in older kitchens where the subfloor wasn’t primed before membrane.
- Hairline cracks running along tile joints. Frequently the DITRA uncoupling membrane was cut short of the wall by an inch or two, so floor movement telegraphs straight through the tile.
- Grout darkening or discoloration near the sink and dishwasher. Points to moisture reaching the substrate from a failed KERDI seam or an unbanded corner – a real issue in Las Vegas because our air is dry enough that surface tile dries fast while the substrate stays wet for weeks.
- Loose or lifting edge trim at backsplash corners. SCHIENE or JOLLY profiles set with the wrong adhesive or against unprimed backer can pop free after a hot summer’s expansion-contraction cycle.
- Grout haze returning after every cleaning, or a musty smell under the cabinets. Means water is trapped under the tile assembly, and it will keep coming back until the system is rebuilt.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how Schluter-centered kitchen work prices out in Las Vegas right now. The full kitchen remodel range is $14,000 – $45,000, and inside it each component has its own line. These are installed prices – parts plus labor, with the membrane, thinset, banding, and trim included.
| Scope | Installed Range (Las Vegas) |
|---|---|
| Full kitchen remodel (Schluter assemblies included) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: square footage of tile, whether we’re rebuilding the substrate or just the surface layer, the profile of the tile (large-format porcelain costs more in both material and set time), and whether heating (DITRA-HEAT) is part of the assembly. Every scope and allowance arrives as a written change order before work moves – no surprise invoice at the end, because an allowance that isn’t on paper is a surprise waiting for a date. Every eligible job gets permits pulled and inspections signed, and every completed job is covered by our 90-Day Done Right Promise.
DIY or Call Us?
Some checking is safe. Tapping for hollow spots, photographing the failing seam, measuring tile thickness at a doorway, and reading the label on any exposed backer are all fine for a homeowner to do – that information is genuinely useful to whoever quotes your repair.
What goes wrong with DIY here isn’t the danger of high tension or a live wire; it’s the substrate. A homeowner can peel up a failed Schluter membrane in an afternoon. Rebonding it correctly, with the right thinset (unmodified, per Schluter’s spec – this is the number one failure we correct), proper banding at every seam and corner, and primer where the slab was dusty, is where the job gets done right or fails again within a year. Las Vegas’s soil movement and 40-degree day-to-night swings punish any shortcut in the substrate. Call (866) 814-4155 for a free estimate – we’ll tell you honestly whether a repair or a rebuild makes sense for your kitchen.
FAQs
A properly installed Schluter assembly (membrane, banding, unmodified thinset) commonly lasts 20-plus years in a Las Vegas kitchen. The failures we see at 8 – 12 years are almost always install-driven – wrong thinset, unbanded corners, or skipped primer – rather than the product wearing out. If your kitchen is 10 years old and the floor has started to hollow, the timeline fits. Call (866) 814-4155 for an honest look.
Sometimes yes – a single backsplash run or an island tile field can often be rebuilt in isolation if the surrounding system is sound. Larger kitchen floor failures usually mean the whole assembly needs rebuilding, because water travels under the membrane further than the visible stain. We’ll tell you which you’re facing after we tap and inspect. Call (866) 814-4155 for a free second opinion on any written estimate.
A backsplash rebuild runs 1 – 2 days; a kitchen floor membrane replacement is typically 3 – 5 working days including cure time before grout. A full kitchen remodel with Schluter assemblies is a multi-week job scheduled in phases so you can still use the room. Exact timing goes on the written scope before work begins. Call (866) 814-4155 to schedule your free estimate.
We source genuine Schluter components through tile-distributor channels – not a van brand and not an off-label equivalent – and we match the exact series before ordering. If your kitchen has a partial OEM system we’re tying into, we identify the series first so the new work and old work actually meet at the same spec. Call (866) 814-4155 and we’ll walk you through it.
Proudly serving Las Vegas and the surrounding communities for over 29 years, founded in 1998 and owner-operated from day one – Tom Barrett and his sons are on-site most days, and every permit gets pulled. A live person answers the phone 24 hours a day, 7 days a week. Standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (866) 814-4155 to schedule your free estimate, with a written line-item quote and no change orders unless they’re on paper first.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.