A Barrett company - serving Las Vegas, NV

Silestone Home Additions & ADU in Las Vegas, NV

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Silestone Home Additions & ADU: The Las Vegas Owner’s Guide

Silestone fabrication and installation in Las Vegas home additions and ADUs runs $45,000 – $130,000 depending on square footage and finish level. We’re an independent installer working with Silestone quartz, not affiliated with the brand, and the part that fails first in these rooms is usually the countertop itself – a seam that opens, a slab that chips at a sink cutout, or a color that was discontinued before your addition was finished. Most owners find out when a fabricator says the slab they need no longer exists and nobody has the matching piece in storage. That’s the phone call we get.

Call (866) 814-4155

Key Takeaways

  • Silestone quartz in a Las Vegas addition or ADU typically costs $2,000 – $6,500 in the countertop line alone; whole-project additions run $45,000 – $130,000.
  • Discontinued Silestone colors are the single biggest cause of “we can’t match it” calls in Las Vegas.
  • Heat exposure at west-facing windows and uncovered patios is the local enemy of quartz – it fades and can crack under direct desert sun.
  • Permits and inspections are pulled on every eligible addition. We don’t skip that step, and we don’t let anyone tell you it’s optional.

Which Silestone Models This Applies To

Silestone is a brand of engineered quartz made by Cosentino, so “which model” really means which series and colorway. The lines you’ll run into in Las Vegas homes and ADUs are the classic collections (White Zeus, Blanco Maple, Lyra, Marengo), the Eternal series (Calacatta Gold, Statuario, Pearl Jasmine), the Eco by Cosentino recycled lines, and the newer Ethereal and Urban Crush offerings. Each has its own slab dimensions, thickness options, and edge profiles, and the fabricator needs the exact colorway name to order the right slab.

How to identify what you have: look under the counter for the fabricator’s sticker or the original invoice, check the seam layout against a photo of your kitchen when it was new, and measure the slab thickness at the edge. Most Silestone in the U.S. is 2cm or 3cm thick. If you can’t find a label, a fabricator can sometimes match from a sample chip, but only if the color hasn’t been discontinued.

OEM versus aftermarket for quartz is different than it sounds. There’s no aftermarket Silestone – quartz is proprietary. Your real choice is genuine Silestone from a current slab or a compatible quartz from another maker (Cambria, for example) that comes close on color and pattern. In a Las Vegas addition or ADU where the new countertop is a fresh install, matching is easy. Where you’re trying to patch a discontinued color into an existing Silestone kitchen, we’ll tell you honestly whether it’s possible or whether the sane move is to replace the whole run.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Silestone Home Additions & ADU Is Failing

You’ll usually know something’s wrong before you have a full failure. The symptoms show up in this order:

  • A seam that shows a faint dark line or won’t take a polish. The seam adhesive has aged or was applied thin. Quartz seams in Las Vegas kitchens fail faster when the room gets direct afternoon sun and daily thermal cycling.
  • A chip or pit at the sink or cooktop cutout. Silestone is hard but not immune to impact, and the cutout edge is the thin point. One dropped cast iron pan writes the story.
  • A hairline crack running from a corner or outlet cutout. Usually a sign of an unsupported overhang or a slab installed over a cabinet that has shifted with the desert’s expansive soils.
  • Color fade or yellowing, especially on a west-facing wall. UV exposure does this to quartz over years. It’s a Las Vegas-specific problem – inland desert sun is unforgiving.
  • A colorway that no longer exists in Silestone’s catalog. Not a physical failure, but the practical failure. If a replacement is needed and the color is discontinued, you’re matching against something that isn’t made anymore.

On additions and ADUs, the same list applies to the new build itself: a countertop that was templated wrong, a slab that arrived with a factory defect, or a fabricator who cut an undermount sink hole at the wrong dimensions.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the countertop line runs in a Las Vegas addition or ADU, installed:

What you’re replacing or installing Typical installed price
Standard Silestone slab, 30 – 40 sq ft (galley or small ADU kitchen) $2,000 – $3,500
Large kitchen or ADU island run with waterfall edge $4,500 – $6,500
Bathroom vanity top, standard size $800 – $3,000
Whole addition or ADU with full Silestone throughout $45,000 – $130,000 (project total)

What drives the range: square footage, slab availability (rare or discontinued colors cost more), edge profile, sink and cooktop cutout complexity, and whether existing cabinets can stay. Parts plus labor is laid out on a written line-item quote – no bundled “install fee.” Every job is covered by a 90-Day Done Right Promise written into the contract, so if a seam opens in month two, we come back.

DIY or Call Us?

There’s very little of this work that’s safe or sensible to do yourself. Quartz slab is heavy (a 2cm slab of 30×96 runs 250 – 300 lbs), it chips with a wrong blade, and cutting it without water-fed tooling is genuinely dangerous to your lungs and your hands. So here’s the honest split:

  • You can check safely: look for the fabricator’s sticker under the counter, photograph the seam and any chips, measure depth and thickness, and write down the color name if it’s on any paperwork.
  • Leave it to us or a dedicated fabricator: templating, cutting, polishing, seaming, and lifting the slab into place. We use diamond tooling and vacuum rigs, and we carry the material damage coverage that makes a slip a paperwork problem, not a remodel delay.

Call (866) 814-4155 for a free estimate on your Las Vegas addition or ADU countertop – we’ll come out, identify the color, and tell you the honest options.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch