A Barrett company - serving Las Vegas, NV
S

Sterling Bathroom Remodeling in Las Vegas, NV

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Bathroom Remodeling: The Las Vegas Owner’s Guide

Sterling bathroom remodeling in Las Vegas runs $9,000 – $28,000 installed, with most single-bath projects landing near the middle of that range once fixtures, tile, and a real vanity are in the scope. A small bath refresh can sit closer to $5,000 – $12,000. We’re an independent contractor, not affiliated with Sterling; we work with Sterling fixtures and source compatible parts for the models we see most.

Call (866) 814-4155

Owners usually find the problem slowly. The shower cartridge starts dripping a little more each month, the toilet fill valve runs long after flushing, or the finish on a Sterling tub cracks near the drain and you notice water in the ceiling below. Nobody calls on a Tuesday for fun. They call when the drip becomes a stain and the stain becomes a repair.

Key Takeaways

  • Bath remodel in Las Vegas: $9,000 – $28,000 installed. Small bath: $5,000 – $12,000.
  • Sterling cartridge and valve parts vary by model line. We match by label and measurement, not guesswork.
  • Every eligible job gets permits pulled and inspections signed. Prices change only in writing, before work moves.
  • 90-Day Done Right Promise on the finished work, written into the contract.

Which Sterling Models This Applies To

Sterling makes shower doors, tub/shower bases, faucets, and toilet internals under several model lines, and the parts are not interchangeable between them. The common trap: an owner pulls a cartridge from a Sterling shower valve at a big-box store, gets it home, and the stem is 3/16″ too long or the seat diameter is off by a millimeter. It threads in. It leaks. That’s a return trip and a shutoff valve dripping into a bucket while you sort it.

Identifying your part comes down to one label and one measurement. Look inside the shower door frame or under the tub lip for the model tag, usually a small sticker or stamped number. Then measure the valve body where the handle mounts, and measure the cartridge stem length with a tape. Write both numbers down before you call anyone, including us. We match against those numbers, not a photo of the handle.

On the OEM-vs-aftermarket question for Sterling specifically: OEM parts are worth the extra cost on anything under pressure – shower cartridges, tub drain assemblies, toilet fill valves. Aftermarket is fine on cosmetic pieces like escutcheons, trim rings, and handle stops. We don’t carry parts on a truck and don’t claim to. We order the specific part for your model and we tell you upfront if the lead time is a week.

If your bathroom is moving into a bigger remodel – a Sterling tub coming out, a walk-in shower going in – that’s where we work. KraftMaid vanities, Cambria or Silestone countertops, and Sterling-compatible shower hardware are the brands we install most in Las Vegas homes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Bathroom Remodeling Is Failing

These are the symptoms we hear most from owners in Las Vegas, and what’s actually underneath each one.

  • Dripping shower or tub spout that won’t stop. The cartridge or valve seat has worn past its sealing edge. It’s the single most common Sterling shower fix we’re called for, and it usually means the valve body is fine but the soft parts are done.
  • Toilet runs or refills itself every 20 minutes. The fill valve or flapper is failing. Cheap part, but it wastes water for weeks before anyone notices the bill.
  • Crack at the tub or base near the drain. Fiberglass and acrylic Sterling bases stress-fracture at the drain opening, especially on floors that flex. Water gets behind the surround and down into the ceiling below if it’s a second-floor bath.
  • Shower door rollers stick or track corrodes. Las Vegas hard water leaves mineral scale on the track, then the rollers bind and the glass hangs crooked. Sometimes it’s the rollers, sometimes it’s the track itself.
  • Handle wobbles or hangs loose. Worn cartridge stem or a stripped handle adapter. The valve body is usually fine; the coupling isn’t.

If the crack is at the base or the surround is separating from the wall, stop using that shower until someone looks at it. Water behind tile in a Las Vegas bath is a $3,000 problem today and a $9,000 problem in six weeks.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest range for bathroom remodeling in Las Vegas, laid out line by line so you can see where the money goes.

Scope Installed Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Vanity installation $800 – $3,000

The range moves on size, tile selection, whether the drain relocates, and whether we’re replacing a Sterling tub base or just the valve and trim. Parts are quoted separately and itemized – you’ll see the cartridge cost and the labor cost on the same page. Every scope, every allowance, and every price change arrives as a written change order before work moves. No surprise invoice at the end, because the allowance that isn’t on paper is a surprise waiting for a date.

Every eligible job includes permits pulled and inspections signed. If your last contractor told you a bathroom permit was optional, that’s the reason we pull one on every job we touch in Las Vegas. Permits protect you when you sell the house. The finished work carries the written 90-Day Done Right Promise – if it’s not right, one call brings us back.

DIY or Call Us?

Some of this you can check yourself, and some of it you shouldn’t touch.

Safe to check: the model sticker on the frame, the flapper and fill valve in the toilet tank, the shower door rollers, and a visual look at the tub base for cracks. Replacing a flapper or a fill valve is a $15 part and 20 minutes of your Saturday.

Where DIY goes wrong: shower cartridges and valve bodies. The valve is under household water pressure and a worn O-ring can blow the cartridge out mid-repair. You get water spraying across the bath and no shutoff unless you know where the main is. Tightening a cartridge to the wrong torque strips the valve body, and now you’re replacing the whole mixer instead of a $30 part. If the cartridge won’t come out cleanly or the valve body shows corrosion, stop and call. That’s not a scare tactic, it’s the reason we won’t quote you a cartridge swap over the phone without asking what’s behind the trim.

Call (866) 814-4155 for a free estimate and a free second opinion on any written estimate you’ve already got from someone else. A live person answers, day or night.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch