A Barrett company - serving Las Vegas, NV

Tamko Kitchen Remodeling in Las Vegas, NV

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Kitchen Remodeling: The Las Vegas Owner’s Guide

Kitchen remodeling in Las Vegas runs $14,000 to $45,000 installed, and the number that matters most for a Tamko component is whether the replacement part matches your exact model before anyone tears into the wall. Most owners discover a failing Tamko kitchen component the same way: a cabinet door stops closing flush, a drawer starts dragging on one side, or a hinge lets go and the door hangs a quarter inch low. Sometimes it’s the slide rail; sometimes it’s the hinge plate pulling out of the stile. If the work was done during the last kitchen remodel, the hardware has been through a Las Vegas summer by now, and summer is what ages these parts faster than anything else.

Call (866) 814-4155

Which Tamko Models This Applies To

Tamko hardware shows up across a wide span of cabinet lines, and the exact part depends on which series your box, hinge, or slide belongs to. Identifying the right replacement means reading the sticker inside the cabinet door or on the back of a drawer box, measuring the hinge cup bore (35mm is common, but not universal), and checking the slide length to the nearest eighth of an inch. Door style matters too: a full-overlay door and a partial-overlay door use different hinge plates, and grabbing the wrong plate is the single most common wrong-part mistake we see.

The OEM-versus-aftermarket call is real. Tamko’s own parts carry the exact fit, but a quality aftermarket equivalent from a recognized hardware brand often costs less and lasts as long. For anything with a moving joint, we lean toward the part with a verifiable spec sheet over the cheapest listing. Tamko-branded kitchens also turn up next to KraftMaid, Cambria, and Silestone installations in Las Vegas homes, so a single remodel can mean parts from more than one manufacturer. Ask before you order.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Kitchen Remodeling Is Failing

Owners usually know something is wrong before they know what. Here are the symptoms we hear about most:

  • Cabinet door sags and won’t stay closed. The hinge plate has loosened from the stile, or the cup screws have stripped. Wood in a dry Las Vegas summer shrinks, and a hinge that was tight in spring can work loose by August.
  • Drawer slides rough or stick halfway. The ball bearing race has lost its grease or collected grit. A drawer that catches is one that will eventually fail outright.
  • Soft-close mechanism no longer cushions. The damper in the slide has worn out. This one is a part swap, not a whole-slide replacement, but only if you get the right damper for your model.
  • Hinge plate screws won’t hold. The screw holes have wallowed out in the particleboard or plywood. A larger screw is a temporary fix; a proper repair restores the bite.
  • Visible rust or pitting on hardware. Rare in Las Vegas, but it happens in kitchens near an evaporative cooler or with heavy steam exposure. Rust means replacement, not cleaning.

Replacement Cost & What’s Included

Replacing Tamko-compatible kitchen hardware in Las Vegas typically runs as a small line item inside a larger job rather than a standalone price, so we quote it inside the relevant scope. Cabinet installation runs $4,000 to $13,000; countertop installation runs $2,000 to $6,500. If the failing part is tied to a cabinet run, expect the hardware work to ride along with the cabinet number. Our written quotes break out parts and labor separately. Hardware change orders come in writing before work starts. Every eligible job includes permits pulled and inspections signed, and the work is backed by the 90-Day Done Right Promise. Estimates are free.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check your own hardware: open the door, read the sticker, measure the hinge cup, and photograph the slide. That much is free and useful. Where DIY goes wrong is in the swap itself. A full cabinet run rehung with the wrong plate can pull out of the stile, and a stripped screw hole in particleboard doesn’t forgive a second attempt. Kitchen hardware doesn’t carry the injury risk of a garage spring, but it can turn a $40 part into a $400 repair fast.

Call (866) 814-4155 and we’ll get the right part on the quote and the work scheduled.

FAQs

How long do Tamko kitchen hardware parts last in Las Vegas? Most cabinet hinges and slides last 10 to 15 years under normal use, less in a kitchen that sees heavy daily traffic or sits next to a heat source. Las Vegas’s dry air and wide temperature swings speed up the wear on any moving joint.

Can the failing part be repaired instead of replaced? Sometimes yes. A loose hinge plate can be re-seated, and a worn soft-close damper can be swapped without replacing the whole slide. A cracked hinge arm or a bent slide rail has to be replaced. We’ll tell you which one you’re looking at before you spend a dime.

How long does the swap take? A single hinge or slide swap is usually an hour or two. A full cabinet run of hardware is typically a half day. The part has to be on hand first, and sourcing the right Tamko part for your model is the step that takes the time, not the install.

How do you source the right Tamko part? We read your model sticker, confirm the hinge cup and slide specs, and order the part or a verified equivalent from a supplier we can vouch for. We don’t stock parts on a truck and we don’t guess at fit. If the exact part is available, we order it; if it’s discontinued, we find the correct aftermarket match and tell you in writing what you’re getting.

Get Your Tamko Kitchen Back in Working Order

Barrett & Sons Construction is an independent Las Vegas remodeling contractor, not affiliated with Tamko. We work with KraftMaid, Cambria, and Silestone on the same jobs, and we bring over 29 years of local experience, a written change order on every price adjustment, and the 90-Day Done Right Promise on every eligible remodel. Our published offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (866) 814-4155 for a free estimate on your Tamko kitchen remodeling in Las Vegas.

Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 814-4155
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Barrett & Sons Construction Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch