Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Las Vegas Owner’s Guide
Barrett & Sons Construction Las Vegas installs fences and gate systems matched to Therma-Tru entry doors and outdoor openings, with most residential fence installation projects running $3,500 to $9,000 installed. We schedule estimates within a few days, and every price change arrives as a written change order before a single post goes in the ground. We’re an independent contractor, not affiliated with Therma-Tru.
Las Vegas owners usually find the problem the same way: the gate sags, a fence panel racks out of square, or the latch on the side-yard door won’t catch the strike plate anymore. The fence looks fine from the street. Up close, the post has shifted, the hinge has pulled, or the hardware has corroded from our alkaline soil and hard water. Once a Therma-Tru door swings in a gate system, the fence and the frame have to move together, and a fence that was never set for that weight will fail first.
Which Therma-Tru Models This Applies To
Therma-Tru makes entry doors, sidelites, and door systems – not fencing. If your entry door or outdoor door has a damaged fence, gate, or screening panel around it, “Therma-Tru fence installation” usually means matching a fence or gate system to the door’s rough opening and swing. That starts with knowing the door model. Look at the hinge jamb label or the glass corner etch – Therma-Tru door labels typically show a model number and a manufacturing code inside the door edge or on the jamb. Those numbers tell us the rough opening width, the door slab thickness (Therma-Tru standard entry slabs run 1-3/4 inches), and whether the door is a fiberglass or steel series. That matters because fiberglass doors are lighter on a gate post than steel. The right match depends on the door swing, the fence line, and how the gate is hinged. We don’t stock parts and we don’t carry inventory on a truck – we source what your door needs based on the model code.
On the OEM-versus-aftermarket question: for the door hardware and the surrounding frame, we install verified parts. For fencing and gate systems, there’s no Therma-Tru-branded fence, so we match the fence to the door’s rough opening and the post spacing that supports it. KraftMaid, Cambria, and Silestone come up in our kitchen work, not here – the door and gate connection is where the alignment matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
Here are the symptoms Las Vegas owners bring us, mapped to the usual cause:
- The gate sags and drags. The hinge has pulled or the post has shifted at grade. In Las Vegas, our soil shrinks hard in summer and swells in monsoon season, so gate posts set too shallow will heave and lean within a season or two.
- The latch won’t catch the strike plate. The door has moved out of square because the gate frame racked, usually from weight on a post that wasn’t sized for the door. A 1-3/4 inch Therma-Tru entry slab on a gate frame is a real load.
- Fence panels lean or wobble. Failed post footings. Our hard, alkaline soil and the shallow caliche layer many Las Vegas yards sit on make footing depth the deciding factor, not the fence material.
- Rust streaks or corroded hardware. Standard gate hardware corrodes fast in our dry-but-dusty air and seasonal irrigation runoff. Corroded hinges bind and pull out of the post.
- The door binds against the gate frame. The fence and the door frame were set separately without a shared reference line. This is the classic installation error, and it shows up months later when the frame and fence move differently.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a residential fence installation or gate system matched to a Therma-Tru door opening in Las Vegas, expect $3,500 to $9,000 installed. On the lower end, a modest side-yard fence and gate with standard hardware. On the upper end, taller privacy fencing with a wider gate around an entry door, heavier post footings, and upgraded hardware. The range is driven by linear feet of fence, gate width and weight, post footing depth, and hardware grade. What’s included: fence material and gate hardware, footings and posts set to local code requirements, alignment of the gate to the door rough opening, and cleanup. The price is written before work starts. If we discover a buried utility, damaged footing, or a door frame that needs rework, you get a written change order before we touch it. Every job is backed by our written 90-Day Done Right Promise. Permits get pulled and inspections signed on any eligible Las Vegas job.
DIY or Call Us?
You can safely check a few things yourself: measure the gate opening, look for the Therma-Tru model label on the door jamb, check whether the gate post has moved at grade, and note where the latch is missing the strike plate. That’s the information we need to quote accurately. What goes wrong with DIY here is post footing and alignment. Setting a gate post for a 1-3/4 inch entry slab in Las Vegas soil without a footing spec means it will move, and a gate that moves will damage your door frame. The real risk is a heavy gate frame swinging free if a post gives way – keep clear of a sagging gate and don’t load it further. For anything involving footing depth or rehanging a heavy door on a gate, call us. Call (866) 814-4155 to schedule your free estimate.
FAQs
Expect 15 to 20 years from a properly footed fence, but 5 to 8 is common for gates that carry door weight on undersized posts. Our alkaline soil and summer heat are hard on footings and hardware. Call (866) 814-4155 for a free estimate.
Sometimes. A pulled hinge or a racked panel can often be rehung or reset if the post and footing are sound. If the post has moved at grade, replacement is usually the honest answer. Call (866) 814-4155 and we’ll tell you which one is true after we’ve looked.
A standard side-yard fence and gate run takes one to three days depending on length, footing depth, and whether the door frame needs resetting. We schedule around weather and inspect before we call it done. Call (866) 814-4155 for a free estimate.
We read the model code off the door jamb label or edge etch and source a gate system and hardware that match the door’s rough opening and slab weight. We don’t stock parts and don’t carry inventory on a truck – the part is matched to your door, not pulled off a shelf. Call (866) 814-4155 to schedule a free estimate.
Call (866) 814-4155 for a free estimate. A live person answers the phone 24 hours a day, 7 days a week. Free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.