Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Las Vegas Owner’s Guide
We install and service Unilock-compatible windows and doors across Las Vegas, and most single unit swaps land between $450 and $2,400 installed depending on whether you’re replacing a sash, a sealed glass unit, a hinge set, or a full door slab. Multi-unit replacements in a Las Vegas home typically run $4,500 – $15,000 for windows or $8,000 – $25,000 for impact-rated units. We schedule these as planned appointments, not same-day walk-ins, because every order has to be measured against the actual opening before anything is ordered.
Owners usually find the problem in one of two ways. Either the window won’t latch going into summer, or the door drags on the threshold and the deadbolt stops lining up. In Las Vegas, both tend to show up in June when the house hits 105 degrees and everything expands and warps a little differently than it did in March. That’s the pattern we see most, and it’s why we ask when the symptom started before we quote a part.
Which Unilock Models This Applies To
Unilock builds windows and doors in several distinct series, and the parts aren’t interchangeable across them. The single most useful thing you can do before calling anyone is find the manufacturer label. It’s usually on the top or side of the sash frame, inside the jamb, or stamped on the glass spacer bar. From that label we can pull the series, the glass package, and the dated production run. That last detail matters more than most owners realize: Unilock has revised hinge geometry and weatherstripping profiles across runs, so a hinge set from one production year will not fit a door from a different year even in the same model line. We’ve seen this trip up homeowners who ordered a part online and found it was half a millimeter off.
If the label is gone, we measure the opening, the sash dimensions, and the glass thickness, and identify the series from those. That’s a real measurement job, not a guess from a photo texted to us. On the OEM versus aftermarket question: for Unilock glass units and hardware, the OEM part is usually the right call because the sizing is proprietary. For rollers, weatherstripping, and standard latches, a quality aftermarket equivalent from a known manufacturer will fit and cost meaningfully less. We’ll tell you which side of that line your part falls on before you commit. We also work with KraftMaid, Cambria, and Silestone on other parts of the house, but on windows and doors we stay in our lane.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
Here’s what we actually see in Las Vegas homes, and what’s usually behind it.
- Fogging or condensation between the panes. That’s a failed seal in the insulated glass unit, not a cleaning problem. Once the seal is gone, the desiccant is spent and the unit has to be replaced. It won’t clear on its own.
- Door drags on the threshold or sticks at the top corner. Usually worn hinge bushings or a settlement-related frame shift. Both are fixable, but the fix depends on which one you have, and guessing wrong wastes money.
- Deadbolt no longer lines up with the strike plate. The door has shifted in the frame. Could be a hinge problem, could be the frame itself has moved. This is worth an in-person look before you buy hardware.
- Draft coming through the perimeter of a closed window. Weatherstripping has compressed or the sash isn’t sealing against the frame anymore. In Las Vegas this shows up as higher cooling bills before it shows up as a comfort issue.
- Glass cracking near a corner or edge. Often thermal stress from the extreme swing between afternoon sun and overnight cool. On impact-rated units this can also indicate a compromised laminate layer.
One thing that surprises owners: Las Vegas’s dry air and UV load age weatherstripping faster than wetter climates do. Rubber that stays pliable in Seattle will go brittle here in a fraction of the time. We see more weatherstripping failures than glass failures on Las Vegas doors, which is the opposite of what people expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the installed price ranges we quote in Las Vegas, and what each one covers.
| What’s being replaced | Installed range |
|---|---|
| Single sash or sealed glass unit | $450 – $1,200 |
| Hinge set or door hardware | $350 – $900 |
| Full door slab replacement | $1,200 – $2,400 |
| Window replacement (whole home) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: glass package type, series, number of units, whether the frame is being replaced or just the operating parts, and whether we find hidden frame damage once the old unit comes out. We don’t quote a phone number and then hand you a different bill. Every scope change arrives as a written change order before any work happens, and you sign off on it. Work is backed by our written 90-Day Done Right Promise, and every eligible job has permits pulled and inspections signed.
DIY or Call Us?
There’s an honest split here. You can safely check your own label, measure the opening, clean the tracks, and confirm whether the door drags consistently or intermittently. Write down what you find. That information is worth real money when you call anyone. What we don’t recommend is glass unit replacement, hinge re-alignment on a heavy door, or anything that involves the door coming off its frame. A full glass door slab is heavy and unforgiving if it slips. The other risk is thermal: the insulated glass on an impact-rated unit is expensive to break, and installing a unit that’s half a millimeter off will crack the glass when it heats up in July. One wrong measurement costs more than the labor you saved. If you’re not sure, call (866) 814-4155 and we’ll walk you through what to check.
FAQs
Expect 15 to 25 years on the frame and glass, but plan on weatherstripping and hardware every 6 to 10 years in Las Vegas’s climate. The UV and dry heat age the softer parts faster than most owners expect. Call (866) 814-4155 for an exact quote on your units – estimates are free.
Often yes, depending on what’s failed. A fogged glass unit can be re-glazed without replacing the whole window. A hinge set can be swapped. A cracked sash usually means full replacement. We’ll tell you which side you’re on before any work starts.
A single sash or glass unit is typically a two to three hour job. A full door replacement is a half-day to full-day job. Whole-home window replacement runs one to three days depending on count and whether impact-rated units are involved. We schedule these as planned appointments, not same-day service.
From the manufacturer label or from direct measurement, matched to your series and production run. We don’t carry parts on a truck and we don’t stock Unilock inventory – every part is ordered specifically for your unit. That’s the only way to get the fit right the first time. Call (866) 814-4155 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.