Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Home Additions & ADU: The Las Vegas Owner’s Guide
If you have a Wellborn home addition or ADU project in Las Vegas and a part has failed, we can install the replacement at a typical total project cost of $45,000 – $130,000 for additions, with the failed component’s swap priced as a line item inside that scope. We’re an independent contractor, not affiliated with Wellborn, and we quote the part and the labor separately in writing before anything is opened up.
Owners usually find out something’s wrong the slow way. A door that used to latch now drags through the summer. The mini-split in the addition can’t hold 74 degrees by mid-June. A window frame on the south wall pulls away from the drywall a hair more every spring. In Las Vegas, the failures show up first on west- and south-facing walls where afternoon sun and 110-degree days do the most work.
Which Wellborn Models This Applies To
Wellborn builds a wide spread of addition and ADU assemblies, and the part you need depends on the series and the era. Match before you order. The label matters more than the measurement when you’re buying.
- Identify the assembly first. Look for the data plate on the addition’s structural header or the inside of the ADU access panel. It lists the series and build date. Photograph it before you call anyone.
- Series changes matter. Wellborn changed hinge and track profiles between production runs, so a part that fits a 2012 unit often won’t seat in a 2019 frame without an adapter. Measure the opening, the fastener spacing, and the plate thickness, not just the width.
- OEM vs. aftermarket. OEM Wellborn parts carry the exact spec. A good aftermarket equivalent works fine on wear items like weather seals and rollers. On structural brackets and anything load-bearing, we source OEM or a documented equivalent – not a generic part off a shelf.
- Bring the model number. With the series and build date, we can confirm fit before we order. Without it, we’re guessing, and guessing costs you a second trip.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Home Additions & ADU Is Failing
Five symptoms we see on Wellborn additions across Las Vegas, and what’s usually behind each one:
- Doors and windows that stick or drag. Thermal expansion from the desert heat cycles the frame, and a worn roller or a sagging hinge carrier is the usual cause. It gets worse every summer, not better.
- Water staining at the wall base or ADU floor edge. A failed seal or flashing lets monsoon rain in. By the time you see the stain, the substrate behind it has already taken on water.
- Gaps at the addition-to-house tie-in. The seam where the addition meets the original wall opens as the two structures move differently. A failed tie bracket or seal is behind most of these.
- Cooling that won’t keep up in the addition. Often a failed door sweep or a seal gone brittle in the UV, letting hot air in around the frame. The mini-split works harder and still loses.
- Visible corrosion or pitting on metal tracks and fasteners. Dry heat plus occasional monsoon humidity eats cheap hardware fast. Pitted track means the roller is riding on a bad surface and will fail next.
Replacement Cost & What’s Included
For a Wellborn addition or ADU project in Las Vegas, the total installed range runs $45,000 – $130,000. A component swap – a door assembly, a seal system, a bracket set – is priced as a line item inside that scope, and we tell you the parts number and the labor number separately.
| Line item | Typical range |
|---|---|
| Component parts (OEM or documented equivalent) | Quoted per part |
| Labor to remove and install | Quoted per scope |
| Full Home Addition project | $45,000 – $130,000 |
What drives the range on a swap: whether the failed part took the substrate with it, whether the series needs an adapter, and access. What’s included: permits pulled on any eligible job, inspections signed, cleanup, and our written 90-Day Done Right Promise on the work. Any price change comes as a written change order before we touch the job. No surprise invoices.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the data plate, photograph the model and series, measure the opening, and note where the failure shows. Do that before you call – it speeds up the quote.
Where DIY goes wrong on a Wellborn addition: anything that involves the structural tie-in, the flashing and seal system, or a load-bearing bracket. Get those wrong and you’re chasing water intrusion and settling that costs far more than the part did. The tie between an addition and the original house carries real load, and a bad repair there shows up a year later in the drywall. If the failure is at the tie-in or the roof connection, stop and call us. Call (866) 814-4155 for a free estimate, and we’ll tell you honestly whether it’s a swap or a bigger repair.
FAQs
Seals and weather stripping on a Wellborn addition typically last 5 to 10 years in Las Vegas, and hardware exposed to direct afternoon sun on a west or south wall can fail sooner. Desert UV and 110-degree swings do the most damage on those faces. Call (866) 814-4155 for an inspection and a written quote – estimates are free.
Sometimes, yes – a stuck door or a worn roller is often a repair, while a failed seal system or a cracked tie bracket usually means replacement. We’ll tell you which before we quote. Call (866) 814-4155 and we’ll give you an honest read.
A single component swap usually takes half a day to a full day; a seal system or tie-in repair can run two to three days depending on access and whether water got into the substrate. We schedule it around the permit and inspection timeline. Call (866) 814-4155 to get on the schedule.
We confirm the series and build date from your data plate, then order OEM or a documented equivalent through suppliers we’ve worked with for years. We don’t claim to have parts on hand – we order the right one, not a generic guess. Call (866) 814-4155 with the model number and we’ll confirm fit.
Contact Barrett & Sons Construction Las Vegas
We’re an independent contractor, not affiliated with Wellborn, and we quote the part, the labor, and any change in writing before work starts. We also work with KraftMaid, Cambria, and Silestone on the interiors that finish an addition. Every eligible job gets permits pulled and inspections signed, and the work carries our 90-Day Done Right Promise. Call (866) 814-4155 for a free estimate, and a live person answers – day or night.
Written by the team at Barrett & Sons Construction Las Vegas, serving Las Vegas and nearby areas.